• 제목/요약/키워드: Electrical Fire Hazard

검색결과 43건 처리시간 0.024초

친환경 선박용 전기추진시스템 안전성 향상 기술개발 동향 (Trends in safety improvement technologies for an electric propulsion system of eco-friendly ships)

  • 김세환;최길수;이재석
    • 전기전자학회논문지
    • /
    • 제25권3호
    • /
    • pp.556-564
    • /
    • 2021
  • 본 논문에서는 친환경 선박용 전기추진시스템의 안전성 향상 기술개발 동향에 대해 조사하였다. 온실효과 및 탄소배출량 감축을 위해 친환경 전기선박에 대한 수요는 점차 늘어날 전망이다. 친환경 전기선박의 주요 구성요소 중 하나인 에너지 저장장치에는 에너지밀도와 효율이 높은 리튬이온 배터리가 일반적으로 사용된다. 하지만 리튬이온 배터리는 에너지 저장장치의 주요 화재원인 중 하나로 지목된다. 항해 중인 선박에 화재 발생 시, 화재진압을 위한 소방설비 및 소방작업이 제한되어 친환경 선박에서의 안전성 향상기술은 더욱 중요하다. 본 논문에서는 친환경 선박의 안전성 향상을 위한 전기추진모터 및 에너지저장장치에 적용되는 최신 기술에 대해 조사 및 분석을 진행하였다.

다양한 화재조건에서 플라스틱 종류에 따른 연기입자의 크기분포 변화 측정 (Measurement of the Size Distribution of Smoke Particles with Plastic Types Under Various Fire Conditions)

  • 구재학;황철홍
    • 한국화재소방학회논문지
    • /
    • 제31권6호
    • /
    • pp.8-15
    • /
    • 2017
  • 화재발생 시에 대부분의 인명 피해는 연기에 의해 발생되는데, 최근 건축 내장재에서 차지하는 플라스틱의 양이 많아지며 발생되는 연기의 유독성이 점차적으로 증가되고 있다. 연기에 의한 인체피해의 상당부분은 흡입연기의 폐침전과 관련이 있으며, 연기입자의 크기분포는 폐침전 특성에 직접적인 영향을 미친다. 따라서 플라스틱 종류에 따른 연기입자의 크기별 발생량 검토는 폐침전에 의한 인체피해 연구에 필수적으로 요구된다. 최근의 목재와 폴리프로필렌(PP)에 대한 연기입자의 발생특성 연구에서 PP의 연기입자 크기분포 특성이 몇 가지 측면에서 목재와는 확연히 다르게 나타났다. 이에 따라, 본 연구에서는 다른 플라스틱들도 연기입자 크기분포에서 PP와 같은 특성을 보이는지 알아보기 위해서 대표적인 4가지 플라스틱(LDPE, PA66, PMMA, PVC)에 대하여 연기입자 크기분포 측정실험을 수행하였다. 특정 조건에서 연소생성물을 균일하게 생성하고 분석하기 위하여 ISO/TS 19700 기준에 따른 등속튜브연소로를 이용하여 연소로의 온도와 산소공급량에 따라 다양한 화재조건에서 연기입자를 균일하게 발생시키고, 정전저압 임팩터를 사용하여 연기입자의 크기에 따른 개수농도를 실시간으로 측정하였다. 실험 결과 4가지 플라스틱의 연기입자 크기분포 특성은 여러 측면에서 PP와 유사하며 목재와는 확연히 다르게 나타났다.

고주파 방사에 의한 가연성가스의 점화 위험성 고찰 (A Study on the Ignition Hazards of Flammable Mixtures by Radio Frequency Radiation)

  • 최상원;이관형;문정기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1749-1751
    • /
    • 1998
  • Close to high power radio/radar transmitters there is a possibility that sparks may be occur at discontinuities in metallic structures. If these structures are in an area in which a flammable mixture may be present, there is a possibility that a fire or explosion may be caused by the sparking. A number of assessment procedures for quantification of the hazard have been produced. This paper reviews the bases of the British Standard covering ignition hazards by radio-frequency radiation and presents some ignition test apparatus to access these hazards.

  • PDF

웨이브렛 변환을 이용한 고저항 지락사고 검출 및 판별 (Fault Detection and Classification of Hi9h Impedance Fault using Wavelet Transform)

  • 고영훈;김철환;김현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 C
    • /
    • pp.1373-1375
    • /
    • 1999
  • High impedance fault (HIF) is defined as fault the general overcurrent relay can not detect or interrupt. Especially when HIF occur in residential areas, energized high voltage conductor results in fire hazard, equiment damage or personal threat. This paper proposes the model of HIF in transmission line using the ZnO arrester and resistance to be implemented within EMTP. Wavelet transform is efficient and useful for the detection of HIF in power system, because it uses variable windows according to frequency. HIF detection method using wavelet transform can distinguish HIF from similar phenomena like arcfurance load, capacitor bank switching and line switching.

  • PDF

Biomedical Laboratory: Its Safety and Risk Management

  • Tun, Tin
    • 대한의생명과학회지
    • /
    • 제23권3호
    • /
    • pp.155-160
    • /
    • 2017
  • Biomedical laboratory is full of risks. Risk could be biological, chemical, radioactive, mechanical, physical, fire and electrical. All possible risks need to be identified, evaluated and controlled. A risk management system must be in place to prevent accident or loss of lives and to improve overall workplace safety and productivity. Safety in laboratory is a combination of appropriate risk management system, engineering controls and technical facilities, administrative controls and safety procedures and practices. Laboratory safety culture must be developed so that exposure to hazards for laboratory personnel, community and environment will be minimized or eliminated. In this review, importance of safety in a biomedical laboratory and risk management will be discussed.

345kV 변전소 주변압기 3차측용 건식형 분로리액터 개발 (The Development of Dry-type Shunt Reactor for 345kV Substation Main Transformer)

  • 안용호;박종범;송택상;한병성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.497-500
    • /
    • 2001
  • Shunt reactors are used to compensate for capacitive VARs generated by lightly loaded transmission lines or underground cables. They are normally connected to the transformer tertiary winding. Dry-type shunt reactors have the advantage compared with oil-immersed shunt reactor as followings. Lower investment and maintenance cost, No fire hazard and no environmental concerns, Simple insulation to ground, Response to transient overvoltage less severe, Linearity of inductance versus load current, Lower-acoustic noise, Easier transport and handling due to lower weight, No oil-collecting system must be provided since there is no oil that can leak into the ground.

  • PDF

저항부하에서 배선용 차단기 접속단자부의 접속결함에 의한 화재위험성 분석 (Fire Hazard Analysis of MCCB Terminals in Resistance Load by Connection Failure)

  • 김동우;이기연;문현욱;김향곤;최충석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
    • /
    • pp.88-90
    • /
    • 2007
  • 본 논문에서는 배선용 차단기 단자와 전선간의 접속결함에 의한 아크발생 및 화재위험성을 분석하였다. 실험 및 분석에 사용된 배선용 차단기는 단상 2선식의 국내외 제품으로 외형분석결과 단자구조는 제품마다 상이하였으며, 단자와 전선간의 접촉저항 측정결과 국내 제품은 접속방식에 따라 접촉저항의 편차가 컸다. 배선용 차단기 단자와 전선간 접속결함에 의한 접촉불량 발생시 단자구조에 따른 아크 및 화염의 특성 실험의 부하조건으로는 저항부하를 사용하였으며, 가진기의 축에 배선용차단기를 설치하여 진동에 의한 영향을 받도록 하였다. 인가시간은 10[분]으로 하였으며, 접촉불량이 진전됨에 따라 배선용 차단기 단자에 아크가 지속적으로 발생하였다. 대략 수분이 경과한 후 차단기가 차단되는 경우도 있었으며, 차단되지 않는 경우도 있었다. 또한 4개사의 제품 중 1개사의 제품은 접속단자 주변 절연재료로 아크에 의한 화염전이가 용이하였다.

  • PDF

EMTP를 이용한 아크 사고의 모의 (Simulation of Fault-Arc using EMTP)

  • 변성현;최해술;채종병;김철환;한경남;김일동;김영한
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 B
    • /
    • pp.850-852
    • /
    • 1996
  • High impedance fault (HIF) is defined as fault that general overcurrent relay can't detect or interrupt, Especially when HIF occur under 15 kV, energized high voltage conductor results in fire hazard, equipment damage or personal threat. Because most HIF occur arc, HIF detection using arc is to increase. Numerical arc model can be applied in an electromagnetic transients program (EMTP) to reproduce the dynamic and random characteristic of arcs for any insulator arrangement, current and system voltage. It allows the representation of any network configuration to be investigated, so the digital simulation of arc faults through air can be substitute for demanding power arc test.

  • PDF

수소연료전지 자동차용 고전압 배선 시스템 평가 기술 개발 (High Voltage Wiring System Evaluation Methode of FCEV (Fuel Cell Electric Vehicle))

  • 임지선;이정훈;이효정;나주란
    • 한국수소및신에너지학회논문집
    • /
    • 제23권4호
    • /
    • pp.330-336
    • /
    • 2012
  • FCEV uses 250 ~ 450 V instead of using 12 V battery. High voltage vehicle can cause electric shock, fire and explosion accident. Therefore, it has potential factors that can cause hazard of safety for users. United states of America and Europe legislate regulations such as ECE R100, FMVSS 305 for regulating electrical safety during driving or after collision. The company manufacturing high voltage components must do advanced R&D about Method for improving and confirming the safety of high voltage. We develop the specific hardware components of high voltage wiring system for the power train system and power supply system of Hyundai Motors FCEV. This paper shows test method of insulative performance for securing the electrical safety of high voltage components such as power cable, connectors and buss-bar, and proposals the guide line value for human safety of FCEV according to the test result of our development components.

분진발생지역의 현장실측과 분석을 통한 위험성 평가 (A Risk Assessment in According to Spot Measures and Analysis in Dust Generation Area)

  • 송길목;김영석;김종민
    • 조명전기설비학회논문지
    • /
    • 제22권9호
    • /
    • pp.103-110
    • /
    • 2008
  • 전기안전 측면에서 전기설비의 환경영향을 평가하고 국내규정에 맞도록 개선하기 위한 검토가 필요하다. 본 논문은 분진발생지역에서 현장실측과 분석을 통해 위험성을 평가하였다. 분진은 절연재료 표면에 부착되어 사고의 원인이 된다. 분진에 의한 전기사고의 메커니즘에 있어서 분진이 전기설비에 쌓이던, 누설전류가 흐르고, 표면이 탄화된다. 이후 줄열에 의해 전기화재가 발생한다. 실태조사결과, 보호 장치 또는 분전함에서 분진이 발견되었으며, 포집된 분진은 포집량과 도전율이 각각 달랐다. ICP-AES에 있어서 대체로 나트륨성분이 검출되었고 고무재생공장의 경우에는 아연과 칼슘성분이 검출되었다. 하수처리장에서는 나트륨, 마그네슘, 철, 칼슘, 알루미늄 등의 성분이 검출되었다. 따라서, 현장실측과 분진의 분석은 분진발생지역에서의 전기적 위험성 평가의 중요한 자료가 될 것이다.