• 센서학회지
• /
• 제17권3호
• /
• pp.223-228
• /
• 2008

A more accurate method of measuring the electrical conductivity (L) of solutions was developed by applying dynamic temperature compensation for measurement of L. Temperature changes of a sample were induced by a heater probe and the changes in L per unit temperature were measured. An equation for L with respect to temperature change was developed and L at the standard temperature ($25^{\circ}C$) was computed. Based on our proposed method, it is possible to have temperature compensation without having the temperature coefficients in advance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.238-241
• /
• 1995

In this paper, a new Maximum Power Point Tractor (MPPT) using Fuzzy Controller is proposed to improve energy convention efficiency. Temperature compensation effect means the photovoltaic voltage is change in condition irradiation, temperature and etc. Fuzzy algorithm is applied to control Boost MPPT converter by Temperature compensation effect. Temperature compensation range is $-40\sim+100^{\circ}C$.

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.155-159
• /
• 2018

Recently, the expansion or establishment of facilities for the logistics system is increasing. Conveyor facilities play a major role in sorting and transporting logistics. Induction motors are widely used for the operation of these conveyor systems. In the logistics system, a large number of induction motors are used. These motors have a considerable distance from the power source side and have a low power factor. The installation position for the power factor compensation of the induction motor is very important. Since the voltage drop depends on the length of the line, it is an important parameter in capacitor capacity determination for power factor compensation. The capacity of the capacitors installed to compensate the power factor of the inductive load should be designed to the extent that self-excitation does not occur. In this study, we analyze the method of compensating the proper power factor considering the voltage drop and the installation position of the induction motor in the logistics system.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.257-265
• /
• 2014

This paper proposes a simple compensation method for switches of the unclamped voltage in the three-level NPC inverter. Voltages of inner-switches can be unclamped in the three-level NPC (neutral point clamped) inverter. It can cause the problem of the switch fault accident. By adding a capacitor, switches of the unclamped voltage can be clamped. Through the analysis of the circuit, the reason behind switches being unclamped was verified which leads to the solution method that designs a compensation capacitor. The proposed method was validated through the simulation and experimental results.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.1-7
• /
• 2014

This paper proposes a current harmonic compensation method for the grid-connected inverter, especially caused by the grid impedance. Grid impedance causes low order harmonics in the grid current and deteriorates power quality. This paper analyzes the negative impact of the grid impedance, and proposes an active feedforward compensation method. Proposing method verified through simulation and experiment with 3-phase 1.5kW voltage source inverter prototype.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.437-439
• /
• 1995

In this paper, a mew maximum power point tracker (MPPT) using Fuzzy Controller is proposed to improve energy conversion efficiency. Temperature compensation effect means that Photovoltaic voltage is change in condition irradiation, temperature and ect. Fuzzy algorithm is applied to control Boost MPPT converter by Temperature compensation effect. In this paper, temperature compensation range is $-40^{\circ}C{\sim}+100^{\circ}C$.

• 한국인터넷방송통신학회논문지
• /
• 제12권4호
• /
• pp.189-194
• /
• 2012

수배전 무효전력 보상 감시 제어시스템은 수배전단에 설치된 유도 모터, 또는 아크 용접기 등과 같은 유도성 부하에서 발생되는 지상무효전력을 보상하고 역률의 개선, 전압 강하의 경감, 전력손실을 감소 시켜줌으로써 전력설비 계통을 경제적이고 안정적으로 운영하도록 도와준다. 그리고 이러한 시스템은 중앙전력감시반이 획득한 수변전설비의 운전상태 및 계측 Data를 근거로 역률 및 위상각을 분석하여 기준 위상각이상으로 전압과 전류의 위상차가 발생 되었을 경우, 무효전력 보상장치의 ON/OFF제어를 수행하여 효율적인 계통관리가 가능하도록 한다. 본 연구에서는 능동데이터베이스를 이용하여 무효전력 보상장치 감시제어 시스템을 구현하는 방안을 제시함으로써, 공장 부하의 지상무효전력이 급격한 증가로 인한 역률 저하, 전압 강하, 손실 발생 등의 징후 발생 시 이에 대한 대처를 사용자(operator)의 개입 없이 데이터베이스 스스로 수행하도록 함으로써 인위에 의한 실수를 최소화 하도록 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1989-2000
• /
• 2015

In this paper, digital peak current mode control for single phase H-bridge inverters is developed and implemented. The digital peak current mode control is achieved by directly controlling the PWM signals by cycle-by-cycle current limitation. Unlike the DC-DC converter where the output voltage always remains in the positive region, the output of DC-AC inverter flips from positive to negative region continuously. Therefore, when the inverter operates in negative region, the control should be changed to valley current mode control. Thus, a novel control logic circuit is required for the function and need to be analyzed for the hardware to track the sinusoidal reference in both regions. The problem of sub-harmonic instability which is inherent with peak current mode control is also addressed, and then proposes the digital slope compensation in constant-sloped external ramp to suppress the oscillation. For unipolar PWM switching method, an adaptive slope compensation in digital manner is also proposed. In this paper, the operating principles and design guidelines of the proposed scheme are presented, along with the performance analysis and numerical simulation. Also, a 200W inverter hardware prototype has been implemented for experimental verification of the proposed controller scheme.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.935-946
• /
• 2012

A new kind of resonant impedance type hybrid active filter (RITHAF) is proposed for dynamic harmonic current suppression and high capacity reactive compensation in medium and high voltage systems. This paper analyzed the different performance of the RITHAF when the active part of the RITHAF is controlled as a current source and as a voltage source, respectively. The harmonic suppression function is defined in this paper. The influences of the changes caused by the grid impedance and the detuning of the passive power filter on the compensating characteristics of the RITHAF are studied by analyzing the suppression function. Simulation and industrial application results show that the RITHAF has excellent performances in harmonic suppression and reactive compensation, which is suitable for medium and high voltage systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.286-289
• /
• 2002

In this paper, we use the PI dual control using do transformation(dq stationary frame and dq synchronous rotating frame) for series voltage sag and swell compensation algorithm. Analysis, simulation results are presented for voltage sags and swells on a three-phase unbalanced voltage source.