• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.887-894
• /
• 2018

An electric vehicle is emerging as an alternative to the response of global climate change and sustainability. However, an Electric vehicle has not been popular due to the constraints such as its price or technical limitations. In order to analyze the effect of purchasing electric vehicles, this study conducted a binary logistic regression model that demonstrates the relation between purchasing and influencing variables. Variables which have high correlation were excluded from the model through the correlation analysis to prevent multicollinearity. Socio-economic variables such as the number of owned vehicles, sex, ages are not significant. On the other hand, Variables related to prices, charging and policy are found to have a significant to effect on the purchase of electric vehicles. In accordance with the model estimated result, it seems to be necessary to improve the charging incentives, or to provide electric car information and to expand opportunities for experience electric vehicles. The result is also expected to be helpful for spreading electric vehicles and formulating policies.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.808-812
• /
• 2013

Multilayer capacitors with high ripple current and high capacitance were manufactured. The electrical properties of these capacitors were characterized for potential application for DC-link capacitors in hybrid electric vehicle inverters. Internal electrode structures were designed to achieve high capacitance and reliability. A single multilayer capacitor showed $0.46{\mu}F/cm^3$ of capacitance, 0.65% of dielectric loss, and 1450 V to 1650 V of dielectric breakdown voltage depending on the design of the internal electrode. The capacitor module designed with several multilayer capacitors gave a total capacitance of $450{\mu}F$, which is enough for hybrid electric vehicles. In particular, an equivalent series resistance of $4.5m{\Omega}$ or less will result in 60 $A_{rms}$, thereby reaching the allowed ripple current for hybrid electric vehicles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1547-1552
• /
• 2017

Unlike diesel locomotives, electric vehicles have various issues because they have very quiet engine sound. For example, pedestrians are exposed to the dangerous electric vehicles on the road because they can not recognize the electric vehicles' sound. Moreover, the driver is unable to recognize how fast driver's car is driving at a certain speed. To solve these problems, electric cars' sound needs to be artificially implemented and played. This paper examines the problems of the previous sampling engine sound approach. In this paper, instead of using sampling sounds, we developed a novel synthesizer algorithm via programming languages as a software. In experimental results, we demonstrated and verified our proposed synthesizer's approach is superior to the previous sampling approach. In addition, through these synthesizer's approach, we highly expect the proposed synthesizer's approach will give safety, convenience and comfort to the electric vehicles' users.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1639-1644
• /
• 2018

Unlike internal combustion engines, electric cars have little engine sound and very quiet, causing the following problems to occur. First of all, pedestrians are a threat to safety because they can't feel the car approaching. The driver is also unable to recognize how fast his car is driving at a certain speed. To solve these problems, electric cars should be artificially created and reused. This paper examines the problems of the Sampling engine sound currently being used and uses the engine sound to produce a sound engine sound for the solution. The sampling engine sound has some limitations in making natural engine sounds. To overcome this problem, we studied two methods of using software synthesizers. They found subtractive synthsizing and wavetable synthsizing, which compared wavetabe synthsizing with actual engine, sampling and subtractive methods to find the most similar to real engine sound. We found that data usage and production cost are more advantageous than sampling method and subtractive syndication method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1575-1580
• /
• 2017

The electric vehicle business is important because it can reduce 30% of the fine dust generated in the metropolitan area and it can solve the air pollution problem by replacing automobile exhaust gas from an internal combustion engine with eco-friendly electric cars. For the construction of the electric charging station infrastructure, which is the core part of the electric car business, we focus to select the optimal location of the electric car charging station in Seoul. The goal of this paper is to utilize and analyze the traffic statistics of T-Map navigation users data and Seoul Metropolitan Transportation Policy Department to deploy the electric cars charging station with optimal location to increase the efficiency. In this paper, the proposed algorithm is composed of two parts of electric charging station selection. First, we analyze real traffic statistics and area. Second, we utilize T-Map navigation data distribution. To select optimal electric charging station location, we apply these two algorithms.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.3
• /
• pp.21-25
• /
• 2014

As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, it is called as, superconducting contactless power transfer for EV (SUWPT4EV) system. As the HTS coil has an enough current density, it can deliver a mass amount of electric energy in spite of a small scale antenna. The SUCPT4EV system has been expected as a noble option to improve the transfer efficiency of large electric power. Such a system consists of two resonator coils; HTS transmitting antenna (Tx) coil and normal conducting receiver (Rx) coil. Especially, the impedance matching for each resonator is a sensitive and plays an important role to improve transfer efficiency as well as delivery distance. In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, within 45 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 15% compared with copper antenna. In addition, we achieved effective impedance matching conditions between HTS antenna and copper receiver at radio frequency (RF) power of 370 kHz.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.22-23
• /
• 2015

As wireless power transfer (WPT) technology using strongly coupled electromagnetic resonators is a recently explored technique to realize the large power delivery and storage without any cable or wire, this technique is required for diffusion of electric vehicles (EVs) since it makes possible a convenient charging system. Typically, since the normal conducting coils are used as a transmitting coil in the CPT system, there is limited to deliver the large power promptly in the contactless EV charging system. From this reason, we proposed the combination CPT technology with HTS transmitting antenna, In this study, we examined the improvement of transmission efficiency and properties for HTS and copper antennas, respectively, at 30 cm distance. Thus, we obtained improved transfer efficiency with HTS antenna over 10% compared with copper antenna

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.1
• /
• pp.23-27
• /
• 2018

As the wireless power transfer (WPT) technology based on strongly resonance coupled method realizes large power charging without any wires through the air, there are advantages compared with the wired counterparts, such as convenient, safety and fearless transmission of power. From this reason, the WPT systems have started to be applied to the wireless charging for various power applications such as train, underwater ship, electric vehicle. This study aims for the effect and characteristics of different inserted resonance coil between Tx and Rx coils for charging system of superconducting magnetic levitation (MAGLEV) train. The transfer efficiency and effect are evaluated with helix type, rectangular type copper resonance coil, and HTS resonance coil under bulb and HTS magnet load, respectively. The input power is adapted with radio frequency (RF) power of 370 kHz below 500 W.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.22-32
• /
• 2002

This paper describes about non-burial AVI (Automatic Vehicle Identification) system using general vehicle as probe car for obtaining more accurate traffic information while conserving road pavement surface. Existing spot traffic detectors have their own limits of not obtaining right information owing to its mathematical method. Burial AVI systems have some defects, causing traffic jam, needing much maintenance cost because of frequent cutting of loop and piezo-electric sensors. Especially, they have hard time to make right detection, when it comes to jamming time. Therefore, in this paper, we propose non-burial AVI system with laser trigger unit. Proposed non-burial AVI system is developed to obtain regional traffic information from normal Passing vehicle by automatic license number recognition technology. We have adapted it to national highway section between Suwon city and Pyong$\~$Taek city(9.5km) and get affirmative results. Vehicle detection rate of laser trigger unit is more than 95$\%$, vehicle recognition rate is 87.8$\%$ and vehicle matching rate is about 14.3$\%$. So we regard these as satisfying results to use the system for traffic information service. We evaluate proposed AVI system by regulation of some institutions which are using similar AVI system and the proposed system satisfies all conditions. For future study, we have plan of detailed research about proper lane number from all of the target lanes, optimal section length, information service period, and data fusion method for existing spot detector.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

This paper is a purpose to study the failure examples for a large bus vehicle fire. The first example, the researcher certified the fact that the absorbing material break away from the upper side of engine room because of weaken durability and the fire was produced in engine. The second example, it sought the fact that the fire breaks out by electric short because of over-load of compressor. The third example, it found the fact that the fire took place by heating of bellows upper part that was connected with muffler and exhaust manifold. The fourth example, it knew the fact that the fire occurred because of the electric short inside junction box of crash body part that was located to driver seat rightside. Therefore, the fire of a large bus occurring by decrepit of absorbing material and electric short have to thoroughgoingly manage the damage and dangerousness if it happens.