• 제목/요약/키워드: Electric field density

검색결과 582건 처리시간 0.022초

비 중심 Si δ-doping 층을 갖는 GaAs-AlxGa1-x 양자우물에서 전계에 따른 전자 분포 (Electron Distribution in the GaAs-AlxGa1-x Quantum Well with the Si δ-doping Layer in a Non-central Position under the External Electric Field)

  • 최준영;전상국
    • 한국전기전자재료학회논문지
    • /
    • 제20권1호
    • /
    • pp.14-18
    • /
    • 2007
  • The electric property in the $GaAs-Al_{x}Ga_{1-x}$ quantum well with the Si ${\delta}-doping$ layer in a non-central position is studied through the effect of the electric field intensity on the electron distribution. The finite difference method is used for the calculation of the subband energy level and its wavefunction. In order to account for the change of the potential energy due to the charged particles, the self consistent method is employed. As the Si ${\delta}-doping$ layer becomes closer to the heterojunction interface, the electrons less affected by Coulomb scattering are greatly increased under the external electric field. Therefore, the high speed device is suggested due to the fact that the high mobility electrons can be increased by positioning the ${\delta}-doping$ layer in the quantum well and by applying the electric field intensity.

초퍼 연산증폭기와 다수의 정합 트랜지스터를 이용한 수중 전기장 센서용 저잡음 전치 증폭기 설계 (Low-Noise Preamplifier Design for Underwater Electric Field Sensors using Chopper stabilized Operational Amplifiers and Multiple Matched Transistors)

  • 배기웅;양창섭;한승환;정상명;정현주
    • 센서학회지
    • /
    • 제31권2호
    • /
    • pp.120-124
    • /
    • 2022
  • With advancements in underwater stealth technology for naval vessels, new sensor configurations for detecting targets have been attracting increased attention. Latest underwater mines adopt multiple sensor configurations that include electric field sensors to detect targets and to help acquire accurate ignition time. An underwater electric field sensor consists of a pair of electrodes, signal processing unit, and preamplifier. For detecting underwater electric fields, the preamplifier requires low-noise amplification at ultra-low frequency bands. In this paper, the specific requirements for low-noise preamplifiers are discussed along with the experimental results of various setups of matched transistors and chopper stabilized operational amplifiers. The results showed that noise characteristics at ultra-low frequency bands were affected significantly by the voltage noise density of the chopper amplifier and the number of matched transistors used for differential amplification. The fabricated preamplifier was operated within normal design parameters, which was verified by testing its gain, phase, and linearity.

나노뿔 형태로 제작된 ZnO 나노선의 전계방출 특성 (Field Emission Property of ZnO Nanowire with Nanocone Shape)

  • 노임준;신백균
    • 전기학회논문지
    • /
    • 제61권4호
    • /
    • pp.590-594
    • /
    • 2012
  • ZnO nanowires were fabricated by hydrothermal synthesis technique for field emission device application. Al-doped zinc oxide (AZO) thin films were prepared as seed layer of catalyst for the ZnO nanowire synthesis, for which conductivity of the seed layer was tried to be improved for enhancing the field emission property of the ZnO nanowire. The AZO seed layer revealed specific resistivity of $ 7.466{\times}10^{-4}[{\Omega}{\cdot}cm]$ and carrier mobility of 18.6[$cm^2$/Vs]. Additionally, upper tip of the prepared ZnO nanowires was treated by hydrochloric acid (HCl) to form a nanocone shape of ZnO nanowire, which was aimed for enhanced focusing of electric field on that and resultingly to improve field emission property of the ZnO nanowires. The ZnO nanowire with nanocone shape revealed decreased threshold electric field and increased current density than those of the simple ZnO nanowires.

국가 간 공동연구 네트워크 밀도가 기술 확산에 미치는 영향 분석: 이차전지, 전기자동차 분야 사례를 중심으로 (An Analysis of the Effect of Density of the Joint Research Network between Countries on Technology Diffusion: focusing on the case of secondary battery and the electric vehicle field)

  • 정대현;권영일;홍순기;조근태
    • 한국콘텐츠학회논문지
    • /
    • 제14권9호
    • /
    • pp.582-588
    • /
    • 2014
  • 본 연구는 국가간 공동연구 네트워크가 기술 지식의 확산에 어떠한 영향을 미치는 가와 네트워크 상에서 중심성이 높은 국가가 새로운 기술을 얼마나 받아들이는지 분석하고 그 의미를 찾는 것을 목적으로 한다. 이를 위해 이차전지 분야와 전기 자동차 분야 논문 정보를 이용하여 연도별 국가간 공동연구 네트워크 밀도와 참여국가 수를 측정하고 변수간의 회귀분석을 수행하였다. 분석결과, 이차전지 분야 공동연구 네트워크 밀도가 증가할수록 참여국가 수는 선형관계로 증가하는 것으로 나타났다. 또한 공동연구 네트워크 상에서 연결정도 중심성이 높은 국가들이 중대형 이차전지 분야 개발을 주도하고 있는 것으로 나타났다. 반면에 전기 자동차 분야의 경우, 네트워크 밀도값은 증가 추세가 나타나지 않지만, 참여국가 수는 증가하고 있는 것으로 나타났다. 이는 기술 확산을 촉진하는데 있어서, 국가간 공동연구가 중요한 역할을 하지만 필요충분 조건은 아닌 것으로 분석되었다. 이러한 결과는 기술 성장에 있어서 반드시 필요한 기술 확산을 촉진하는 요인을 통계적으로 검증하였다는 점에서 의의가 있으나, 네트워크 상에서 중심적 역할에 대한 지표를 연결정도 중심성 만으로 측정하였다는 점과 네트워크 밀도가 행위자간 상호작용에 있어서 반드시 두 행위자간 관계만을 측정한다는 점에서 연구의 한계가 존재한다. 따라서 향후 다수의 연구자간 상호작용을 측정할 수 있는 방안에 대한 연구가 필요하다.

측면진동보조전계 전기영동 전착방식을 적용한 YBCO 초전도 후막의 제작 (Fabrication of YBCO Superconducting Thick Film by Use of Lateral Shaky Field Assisted EPD Method)

  • 소대화;전용우
    • 한국전기전자재료학회논문지
    • /
    • 제16권11호
    • /
    • pp.1041-1046
    • /
    • 2003
  • In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternating field vertically to the EPD field has been developed for the first time and applied to the electrophoretic deposition process. The applied alternating electric field, so called Shaky Alternating Assisted Field, caused a force to be exerted on each YBCO particle and resulted in a shaking of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. The usual commercial electrical power was used for the vertically applied alternating voltage and the induced electric field was 25-120 V/cm at 60Hz. The thick film fabricated by the method developed in this paper showed better surface uniformity without crack and porosity and improved film characteristics such as critical temperature (Tc,zero = 90 K) and critical current density (2354 A/$\textrm{cm}^2$), Therefore, it is expected that the shaky-aligned electrophoretic deposition method can be used to fabricate superconductor films through a simpler process and at less expense.

Fabrication of High Break-down Voltage MIM Capacitors for IPD Applications

  • Wang, Cong;Kim, Nam-Young
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.241-241
    • /
    • 2009
  • For the Radio Frequency Integrated Passive Device (RFIPD) application, we have successfully developed and characterized high break-down voltage metal-insulator-metal (MIM) capacitors with 2,000 ${\AA}$ plasma-enhanced chemical vapor deposition (PECVD) silicon nitride which deposited with $SiH_4/NH_3$ gas mixing rate, working pressure, and RF power of PECVD at $250^{\circ}C$ chamber temperature. At the PECVD process condition of gas mixing rate (0.957), working pressure (0.9 Torr), and RF power (60 W), the AFM RMS value of about 2,000 ${\AA}$ silicon nitride on the bottom metal was the lowest of 0.862 nm and break-down electric field was the highest of about 8.0 MV/cm with the capacitance density of 326.5 $pF/mm^2$.

  • PDF

집진기내 입자 포집과 비산 문제에 대한 수치적 연구 (Numerical Study of Particle Collection and Entrainment in Electrostatic Precipitator)

  • 김주현;권순철;권기환;이상환;이주희
    • 한국유체기계학회 논문집
    • /
    • 제15권1호
    • /
    • pp.27-35
    • /
    • 2012
  • A numerical simulation for particle collection efficiency in a wire-plate electrostatic precipitator (ESP) has been performed. Method of characteristics and finite differencing method (MOC-FDM) were employed to obtain electric field and space charge density, and lattice boltzmann method (LBM) was used to predict the Electrohydrodynamic (EHD) flow according to the ion convection. Large eddy simulation (LES) was considered for turbulent flow and particle simulation was performed by discrete element method (DEM) which considered field charging, electric force, drag force and wall-collision. One way coupling from FDM to LBM was used with small and low density particle assumption. When the charged particle collided with the collecting plate, particle-wall collision was calculated for re-entertainment effect and the effect of gravity force was considered.

소자 내부에서 전하 운송체의 이동 메카니즘에 관한 연구 (A Study on the Transference Mechanism of Charge carriers within the Devices)

  • 심혜연;김준호;김영관
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.508-509
    • /
    • 2005
  • In case of ITO/MEH-PPV/Al structure, the quantity of charge carriers flowing through the organic material was few and the density of them is fixed. The electric field inside of the device almost didn't change with the position. On the other hands, in case of Au/MEH-PPV/Au structure, the hole density increased rapidly nearby the anode but decreased nearby the cathode. The space charge phenomenon followed sufficient hole injection resulted in the change of the electric field with the position inside of the device. We verified that the result of the current-voltage simulation corresponded with experimental result.

  • PDF

ECR Reactor 내의 Langmuir Probe 시뮬레이션 (Simulation of a Langmuir Probe in an ECR Reactor)

  • 김훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 C
    • /
    • pp.1609-1611
    • /
    • 1994
  • In ECR and helicon reactors for plasma processing, a high density plasma is generated in a source region which is connected to a diffusion region where the processing takes place. Large density and potential gradients can develop at the orifice of the source which drive ion currents into the diffusion region. The average ion velocity may become the order of the sound velocity. Measurements of the ion saturation current to a Langmuir probe are used as a standard method of determining the plasma density in laboratory discharges. However, the analysis becomes difficult in a steaming plasma. We have used the HAMLET plasma simulator to simulate the ion flow to a large langmuir probe in an ECR plasma. The collection surface was aligned with the Held upstream, normal to the field, and downstream. ion trajectories through the electric and magnetic fields were calculated including ion-neutral collisions. We examines the ratio of ion current density to plasma density as a function of magnetic field and pressure.

  • PDF

전자기 성형에서의 테이퍼진 지속집중기의 자기압력에 관한 연구

  • 최재찬;조용철;이종수;황운석;김남환
    • 한국정밀공학회지
    • /
    • 제7권2호
    • /
    • pp.14-27
    • /
    • 1990
  • Electromagnetic Pulse Forming is the one of the high velocity forming method. When the electric energy which is charged in the capacitor bank is suddenly discharged into the electromagnetic coil, the high magnetic field occurs at the airgap between the electromagnetic coil and workpiece. Thus we can obtain the high electromagnetic pressure, which is proportional to the square of magnetic flux density. This is the basic principle of the electromagnetic pulse forming. In this paper, the equivalent L-R-C circuit is derived by computing the magnetic field and its loss of the total system. Thus, the values of the magnetic flux density and pressure can be obtained from the equation of this circuit. As a result, the computed and measured values of the maximum magnetic flux density and pressure are compared and the characteristics of the tapered field shaper are further discussed as follows; 1) The strength of magnetic flux density and pressure can be controlled by the charged energy and the size of the airgap between the inner field shaper and the workpiece. 2) During the design of the tapered field shaper, the penetration of the magnetic flux through the sharp edge should be considered.

  • PDF