• Journal of Power System Engineering
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2010

A side by side refrigerator is popularly used one among electric home appliances according to the rise of the customer's living standard. But the frost problem in freezing compartment comes out whenever we develop the high quality refrigerator. In this research, internal flow simulation and temperature measurement were carried out by using CFD and T-type thermocouple respectively in order to understand freezing mechanism. It was revealed that the amount of frost beneath the 1st and 2nd shelves is approximately 40% of total frost and the cause of frost generation is due to bad circulation of low speed cold flow. Using this analysis, the shapes of outlets under shelves are modified. So, the amount of frost in this modified model decreases 6% comparing to original one.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.211-214
• /
• 2000

In this paper, a discrete-time S-dimensional chaos circuit (S = 1,2,3,4,...) with array structure is proposed. By employing array structure which consists of 1-dimensional chaos circuits, the proposed circuit can achieve long working-life. This feature is favorable to exploit as a building block of chaos application systems to get into home electric appliances. Further more, the proposed circuit synthesized using switched-current (SI) techniques is suitable for integration. Concerning the proposed circuit, SPICE simulations are performed. SPICE simulations showed that the proposed circuit can generate the chaotic signals in spite of the fault of the building blocks of the proposed circuit. The proposed circuit is integrable by a standard BiCMOS technology.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1162-1164
• /
• 2000

Stratum Axial Type BLDC Motor has remarkable efficiency owing to outstanding characteristics of speed and torque as well as its small size. In this paper 2-Degree of Freedom PI (TDOF PI) control method is presented in order to improve the efficiency of Stratum Axial Type BLDC Motor and the simulation proves that the separate control for speed characteristic from answering characteristic of load torque particularly allows the construction of superior control system to PI control system. These results are significant in that the improved Stratum Axial Type BLDC Motor enables the production of much smaller, lighter, and noiseless electric home appliances such as air-conditioner and refrigerator.

• Journal of Families and Better Life
• /
• v.23 no.6 s.78
• /
• pp.117-131
• /
• 2005

In this paper, 1 examined role gratification and role strain of South Korean working mothers. The results show that South Korean working mothers experienced very similar level of role gratification and role strain as taking their multiple roles. The findings also show that the factors of caregiving demands, employment demands, caregiving resources, employment resources are not strongly related to role gratification and role strain. Among the 12 caregiving demand variables and employment demand variables, number of children, type of family, number of hours worked were significantly related to producing role gratification. Among the 12 caregiving demand variables, number of hours worked, number of husbands absence due to night work were significantly related to producing role strain. Among the 8 caregiving resources, participants satisfaction due to income contribution, look to make a purchase new electric home appliances were significantly related to produce role satisfaction. Among the 8 caregiving resources, number of family support policies in the husbands workplace, participants satisfaction due to income contribution were significantly related to producing role strain.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.111-118
• /
• 2014

The Smart grid refers to the technology that enables efficient usage of electric power by collecting information concerning the power usage and power lines grafting information and communications technology to onto power grids. There are Zigbee, PLC or IEEE 802.11 WLAN MAC as a core technology of the Smart grid, but in this paper, the discussion is focused on the PLC. The PLC is the technology that carries out data communications using power lines and put into practical use in the field of lights or home appliances control recently but PLC-applied communications between electronic devices are rarely seen. For the reason that the PLC uses high-voltage power lines and has a disadvantage of experiencing higher data loss rate caused by the noises produced by going through transformers, the technology is yet to be used in many areas. Nevertheless, the PLC has been studied widely recently in respect that it's the low-cost communication solution for the Smart Metering [1]. Moreover, this technology is emerging as a novel data communication method and discussed as an important technology lately due to the developments of the Smart grid systems and Internet of things (IoT). Thus, in this paper, the results obtained from designing and performing implementation scenario for the PLC-based Smart grid home network system were compared and analyzed with that of IEEE 802.11 WLAN MAC (the foundation technology at Jeju Smart grid Test bed)-based Smart grid home network. Thus, in this paper, OPNET 14.5 PL8, OSI 7 layer, PLC router nodes and PLC nodes had been used for the designing and implementation simulations of both systems. Additionally, QoS was not considered in order to guarantee that all the traffics would not have the same processing priority.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1223-1230
• /
• 2021

Recently, energy resource management is a major concern around the world. Energy management activities minimize environmental impacts of the energy production. This paper presents design and prototyping of a home electric energy monitoring system that provides residential consumers with real time information about their electricity use. The developed system is composed of an in-house sensing system and a server system. The in-home sensing system is a set of wireless smart plug which have an AC power socket, a relay to switch the socket ON/OFF, a CT sensor to sense current of load appliance and a Kmote. The Kmote is a wireless communication interface based on TinyOS. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to residential consumers. We analyzed and presented energy consumption data from electrical appliances for 3 months in home. The experimental results show the promising possibilities to estimate the energy consumption patterns and the current status.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.3
• /
• pp.21-31
• /
• 2020

The government mandates gradually zero energy building and Photovoltaic power generation systems installed in buildings are emerging as the most realistic alternative to increase the independence rate of building energy. In this study, we propose a method to reduce the power consumption of households by increasing the PV capacity of balconies and applying the method used the charged electric power stored in batteries after sunset. In order to evaluate the electric power energy savings of the residential BESS, a balcony PV 1.2 kW and a battery pack 2 kWh were installed for 9 houses in 4 apartments in Seoul and Gyeonggi-do. The BESS is charged when the balcony PV is generated electric power, and when solar power generation is finished, it supplies power to the electric appliances connected to the load. As a result of installing the solar PV module 1.2 kW and 2 kWh class BESS for 3 households located in Seoul and Gyeonggi-do, the average electric power consumption saving rate was 40%. The reduction in electricity consumption in the case of zero generation surplus power by maximizing the utilization rate of BESS has been improved to about 53%. Therefore, in order to increase the self-sufficiency rate of electric energy in apartment houses, it is effective to increase the solar photovoltaic capacity of the balcony and apply the residential BESS. In the future, it is believed that the balcony PV and home BESS will play a key role in achieving mandatory zero-energy housing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.737-746
• /
• 2009

In this study, we have developed one chip system IC for preventing the overload, detecting an abnormal conditions, and controlling the fire prevention in the intelligent home appliances. For the purpose, a circuit detectable an electric leak for preventing an electric shock, and a circuit detectable arc that has effect directly on the fire are designed. The circuits designed on every block are verified by comparing simulation with bread-boarding using a standard transistors. The system IC is fabricated by using 34 V 2 metal $1.5{\mu}m$ bipolar transistor process from evaluation results. The electrical performances of IC application circuits and the system IC equipped on PCB board are evaluated. It is confirmed that the system IC is well operated for arc and ground fault(GF) signal.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.964-966
• /
• 2003

The three-phase induction motor is rugged, reliable, long-lived, self-starting, smooth-running. But it is relatively inexpensive and three-phase power in not available everywhere, so if possible we need single-phase motor with the same characteristics. In fact, single-phase induction motors have excellent characteristics and outnumber the three-phase variety. Most of the small electric motors used in home, farm, or office are single-phase induction motors of one type or another. This electric motors application field need most energy saving type drive according to enlargement of electronic goods and to tend high class. The paper is proposed a various phase control methods for energy saving of single- phase induction motor. The controllers that are embodied by each method can use by various usage according to each performance and it is considered that application may help in the electrical energy saving because is possible to other electrical appliances.

• Archives of design research
• /
• v.11 no.1
• /
• pp.237-244
• /
• 1998

Rapid prototyping is an efficient method to evaluate the usability of electric home appliances. However, the use of rapid prototyping method in usability tests has not been sufficiently validated. The purpose of this study was to validate computer-generated prototypes whether they can replace real products in usability tests. The control-display panel of a refrigerator was selected for this study. Sixteen female subjects participated in a between-subjects experiment: Eight subjects of them used the real refrigerator while others used the computer-generated prototype of the refrigerator. The difference between the refrigerator and the prototype was analyzed in terms of task failure rate, task completion time, and the number of buttons pressed for three typical tasks: clock setting, selecting an operation mode for refrigerating room, and selecting an rapid freezing mode. The results of a non-parametric statistical test showed that the prototype was not significantly different from the real refrigerator. Therefore, the rapid prototyping technique can be applied to the usability tests for the simple electric home appliances such as the refrigerator.