• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.600-603
• /
• 2012

본 논문은 최근 친환경 차량인 EV & HEV의 전장품에 운전 효율 및 연비를 극대화하기 위해 브러시리스 직류 (Brushless DC) 전동기 및 Sensorless Drive를 적용시키는 사례가 증가하고 있다. 특히 전 세계적으로 환경오염의 주범이 되고 있는 차량의 이산화 탄소 배출량 규제, 계속된 유가상승 등에 따라 가장 밀접하게 연관되어 있는 자동차 전장품에 전동화를 통한 연비향상을 적극적으로 추진하고 있다. 본 논문에서는 차량의 전장 제품으로 다양하게 적용되고 있는 에어컨 압축기로 냉방용 컴프레서에 브러시리스 직류전동기 및 Sensorless 제어기를 적용 에어컨 컴프레서를 개발 하여 20CC 전동식 스크롤 컴프레서에 적용하여 실험하였다. 이러한 실험으로 제품의 운전 효율 증대시킴은 물론 우월한 압축 성능을 가져 옴으로써 차량용 에어컨 컴프레서의 고효율 전동화를 유도 시킬 수 있음을 확인 할 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.512-513
• /
• 2012

The electric motor is essential to drive turbo machinery. In order to overcome the speed limitations of general motors, the inverter is used to perform high speed to tens of rpm. The high speed drives are widely used in many applications such as turbo blower, turbo centrifugal compressors, and pump using air bearing technique. Starting of high speed motor can cause step out, stall, oscillation of motor because the phase inductance is much smaller than that of ordinary motor. This paper studied on the starting characteristic of variable speed centrifugal chiller considering high speed motor characteristics. Finally, the superiority of the inverter is verified by experimental results.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.122-124
• /
• 2001

In this paper, the influence of electrical parameters such as the turn-on and turn-off angle on the torque and force characteristics is investigated for the reduction of the torque ripple which is main source of vibration and noise in switched reluctance motor (SRM). The four different types of the turn-on angle are set to the section of rising inductance profile respectively. The optimum turn-on angle is proposed for the acquisition of the flat current shape minimizing the torque ripple. 2D finite element method (FEM) considering the iron saturation and the actual switching circuit of the SRM drive is applied for the dynamic analysis. The simulation results of phase current and torque are also compared to the experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.121-124
• /
• 1998

Front end AC to DC converters of the boost type are used in traction applications for generating the DC link for the inverters. A GTO based converter is usually switched with a switching frequency of 300 to 500Hz, resulting in low frequency harmonic problems. In order to avoid this, multiple converters with Phase shifted carrier waveforms are used to suppress the low frequency harmonics. A detailed study of an AC to DC converter, with two converters parallely operated with Phase shifted carrier wave farms is Presented in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.31-37
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.93-99
• /
• 1998

We present a novel micropump of which pumping mechanism is based upon MHD (Magnetohydrodynamic) principle. The MHD micropump uses Lorentz force as pumping source. In the MHD micropump, Lorentz force is applied into initially stagnant conducting fluid to drive it in magnetic and electric field to flow in both directions. The performance of the MHD micropump is obtained by measuring the pressure head difference and flow rate as applied voltage changes from 10 to 60 V DC at 0.19 and 0.44 Tesla. The pressure head difference is 18 mm at 38 mA and the flow rate is 63 ${\mu}{\ell}$ /min at 1.8 mA when the inside diameter of inlet/outlet tube is 2 mm and the magnetic flux density is 0.44 Tesla.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4522-4528
• /
• 2010

The single phase switched reluctance motor has simple, robust structure and economical drive system. So, it is useful to apply in the industrial and home applied machines. Especially, the single phase induction motor, used much in field, has a low efficiency and control ability. For the replacement of it, the single phase SRM is presented. In this paper, the design and characteristics of single phase SRM considering the rotor shape will be presented in the base of general electric motor design method and poly phase SRM design method.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.85-86
• /
• 2016

본 논문은 내부 저항을 추정하여 배터리 노화 상태 (State of Health)를 판단하는 알고리즘을 제안한다. 내부 저항은 차량 구동 시 발생하는 전류 변화량과 그에 따른 전압강하 특성을 이용하여 추정되며, 정확도를 높이기 위해 차량의 주행 특성을 고려하여 추정 조건을 결정한다. 알고리즘의 정확도는 MATLAB 시뮬레이션을 통해 검증한다.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.288-295
• /
• 1999

This paper presents an application of vector control strategy for 1.2MVA IGBT traction drive for electric railway vehicle. The vector control requires the control of the phase and amplitude of output voltage vector[5]. But in case of traction system far railway vehicle, the one-pulse mode is used in order to utilize the link voltage fully[8]. So it is impossible to control the flux axis current and the torque axis current instantaneously and independently. So this paper proposes the vector control strategy with slip-frequency control at one-pulse mode. And precise switching technique between the two different control structures has been proposed. And the strategy was verified by experimental result with 1.2MVA IGBT inverter with four 210㎾ induction motors.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.36-42
• /
• 2019

The ESP (Electronic Stability Program) is an active control system that controls the posture of the vehicle by sensing the unstable state of the vehicle during braking, driving, or turning. The system works if the vehicle becomes unstable and it is very dangerous to develop it in the actual vehicle. For this reason, many studies have been carried out on the method of developing with simulation such as SIL / EIL. Some advanced companies have already applied it to the product development process. In this study, ESP hydraulic system and braking device model were constructed using SimulationX to build ESP SIL / EIL model. The hydraulic system model was constructed using the actual design parameters and the performance of the hydraulic model was verified by comparing with the actual vehicle test.