• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.960-968
• /
• 2009

This paper presents a design optimization process for interior permanent magnet synchronous motors (IPMSM) for hybrid electric compressors (HEC) which are applied to hybrid electrical vehicles. A hybrid electric compressor is composed of an electric motor driving section and an engine driving section which is connected to the engine by a pulley belt. A hybrid electric compressor driving motor requires half of the full driving power of a compressor. Even though an engine is not operated at the idling stop mode, the electric motor drives the air-conditioner compressor by itself so that the air conditioning system can produce its minimum cooling capacity. In this paper, the design optimization of an IPMSM for a 42 (V) applied voltage system is studied using the design of experiment (DOE) and response surface method (RSM) of 6sigma. The driving characteristics of this motor drive system are measured and analyzed by experiment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.379-381
• /
• 2002

Mitsubishi Electric Corporation has marketed a series of multimedia CRTs enabling bright picture windows in a high-resolution date display screen. The key components of the multimedia CRTs named Diamondtran $M^2$ are a high-gm (low drive-voltage) electron gun and an aperture grille mask. A high-gm electron gun has been developed by designing a beam forming region with high-gm configuration combining with a high current-density cathode. The development of next generation high-gm guns are also introduced

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.449-455
• /
• 2011

Electric drive vehicles (EDV) have received much attention recently because of their environmental and energy benefits. In an EDV, the motor drive system directly influences the performance of the propulsion system. However, the available DC voltage is limited, which limits the maximum speed of the motors. At high speeds, the inverter voltage increases if the square wave (SW) voltage (six-step operation) is used. Although conventional direct torque control (DTC) has several advantages, it cannot work in the six-step mode required in high-speed applications. In this paper, a single-mode seamless DTC for AC motors is proposed. In this scheme, the trajectory of the reference flux changes continuously between circular and hexagonal paths. Therefore, the armature voltage changes smoothly from a high-frequency switching pattern to a square wave pattern without torque discontinuity. In addition, because multi-mode controllers are not used, implementation is more straightforward. Simulation results show the voltage pattern changes smoothly when the motor speed changes, and consequently, torque control without torque discontinuity is possible in the field weakening area even with a six-step voltage pattern.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.11
• /
• pp.511-518
• /
• 2005

This paper presents the design and drive characteristics of a switched reluctance motor for an electric power pallet vehicle. The designed switched reluctance motor is redesigned by using the finite element analysis(FEA) as a variation of the pole-arc angle for the purpose of an electric power pallet vehicle performance. The output power and torque characteristics of a switched reluctance motor are variable by switching angles of the commutator. Therefor this paper is studied about relationship between the output power and torque characteristics of a switched reluctance motor according to switching angles. The output power of the characteristic point of an electric power pallet vehicle has been shown by experiment. The designed motor drive system operates with the low voltage and high current with using the battery. The core and frame temperatures were described. In this paper, the designed motor is shown better drive characteristics than the DC motor from the rated to maximum, which is verified by the finite element analysis and experimental results.

• Journal of Power Electronics
• /
• v.8 no.1
• /
• pp.23-34
• /
• 2008

This paper deals with a Direct Torque Control (DTC) of an Interior Permanent Magnet Synchronous Motor (IPMSM) for the Electric Vehicle (EV) propulsion system using a Neural Network (NN). The Conventional DTC with optimized switching lookup table and three level torque controller generates relatively large torque ripples in an electric vehicle motor drive. For reducing the torque ripples, a three level torque controller is hereby replaced by the five level torque controller. Furthermore, the switching lookup table of the five level torque controller based DTC is replaced with a Neural Network. These DTC schemes of an IPMSM drive are simulated using MATLAB/SIMULINK. The simulated results are compared with the conventional DTC and it is found that the ripples in the torque, as well as in the stator current, are reduced drastically.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1203-1205
• /
• 1992

Due to poor energy resources, the importance of energy saving has been greatly emphasized. It can be one method of energy saving to reduce the power. The AC adjustable speed drive systems show excellent efficiency, which have been developed in recent years. The adjustable speed drive system improves the efficiency in lightly load condition and extend the life span of motor by limiting the over-current at starting. The main topic of study is the results of energy saving and emergency transfer.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.282-290
• /
• 2014

This paper discusses the development of a 3.5 kW switched reluctance motor (SRM)-based electric air-conditioning (AC) compressor, focusing primarily on the design aspects of the SRM and the integrated controller. In addition to the increased price of rare-earth magnets, SRM's operation capability at high speed and high temperature makes the SRM a viable alternative to the permanent magnet motor for electrically driven automotive air conditioning compressors. A compact and energy efficient scroll compressor is designed and constructed. Two feasible SRM topologies are considered, in terms of efficiency, torque ripple, and acoustic noise. Compact drive electronics are designed and employed to drive the SRM-based compressor. The static and dynamic performance is validated by simulation and experiment.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.938-943
• /
• 1998

The induction motor of the electric vehicles is controlled based on the vector control method to obtain good torque control characteristics. In the conventional vector control system, the field exciting current should be kept on a constant value to keep a stable flux level. This method has a liability that core loss becomes increasing at the light load region. To solve this liability, the efficiency maximizing control method of the vector controlled induction motor is proposed in thid paper. We developed light weight water cooled 60kW induction motor drive system which adopts our method and fabricated a conversion electric car for actual vehicle test. We demonstrate the usefulness of drive system by comparing its driving mode with conventional field oriented system and an efficiency maximizing controlled induction motor.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.95-99
• /
• 2001

In this paper, a drive system for multi-phase bipolar brushless DC (MPB BLDC) motor is presented. This drive system is used for an electric bicycle. In general, the maximum and minimum speed of electric bicycle are required by law. At first, the proposed controller is satisfied for the limited speed control. Secondly, the system has a technique of exited with modulation(EWM), bidirection control, and partial square wave control. Thirdly, the controller is designed for system stability Experimental results show the performance of the proposed controller of MPB BLDC motors for an electric bicycle.

• Journal of Drive and Control
• /
• v.13 no.1
• /
• pp.10-17
• /
• 2016

e-4WD(Electric-4WD) system is a 4WD(4-Wheel Drive) System that can transform a car into a Hybrid System. e-4WD consists of a Motor, Inverter, Speed reducer and Clutch. The Motor, Speed reducer and Clutch are installed on the rear sub-frame as a chassis module type. The inverter is installed separately. Compared to a mechanical 4WD, the e-4WD system has many advantages. For example, the reduced number of drivetrain components makes better use of the space. Driving with a motor only at low speed improves fuel economy and reduces exhaust gas. Engine downsizing is available because the motor assists the engine. The performance of a conventional HEV(Hybrid Electric Vehicle) system can also be maintained. This paper proposes the specifications of components and the control logic for an e-4WD System. And the effect of the e-4WD system is proven using a test vehicle equipped with components under various test conditions.