• 제목/요약/키워드: Electric Control

검색결과 4,658건 처리시간 0.035초

불소도포 및 지각과민처치제 적용 후 상아세관 폐쇄효과와 지속력 평가 (Occluding Effect of the Application of Fluoride Compounds and Desensitizers on Dentinal Tubules)

  • 이예진;정문진;안용순;천수경;정순정;임도선
    • 치위생과학회지
    • /
    • 제16권4호
    • /
    • pp.272-283
    • /
    • 2016
  • 본 연구는 치과병 의원에서 일반적으로 사용되고 있는 불소화합물과 지각과민처치제의 상아세관 폐쇄효과를 비교 분석하고, 전동칫솔질을 시행하여 시간경과에 따른 유효성분의 지속력을 평가하고자 하였다. 발거된 지 3개월 이내의 우식이나 수복, 보철물이 없는 건전한 사람의 대구치 35개를 선택하여 4등분하였고 이 중 135개의 시편을 본 연구에 사용하였다. 이들 시편을 아무런 처치를 하지 않은 대조군과 5개의 실험군으로 구분하였고, 실험군은 산성불화인산염, 불소바니쉬, Gluma, Super Seal, SE-Bond를 선정하여 대상치아에 도포하였다. 이후 1주(140회), 2주(280회), 4주(560회)에 해당하는 전동칫솔질을 시행하였고, 각 시편별 3부위를 주사전자현미경(SEM)으로 상아세관 폐쇄도를 관찰하였다. 그 결과 전동칫솔질 시행 1주, 2주, 4주에서 모두 불소바니쉬 도포군의 상아세관 폐쇄도가 가장 높았으며, 그 다음으로 SE-Bond 도포군이 높게 나타났다. 또한 Gluma 도포군은 다른 실험군에 비해 가장 낮은 상아세관 폐쇄도를 나타냈으며, 칫솔질 시행 4주에서는 Gluma 도포군과 Super Seal 도포군이 다른 실험군에 비해 낮은 상아세관 폐쇄도를 나타냈다. 본 연구를 종합하면, 처치 4주 후에도 불소바니쉬와 SE-Bond는 다른 실험군에 비해 상아세관 폐쇄도가 높은 것으로 나타났다. 따라서 임상에서 지각과민 치료 시 불소바니쉬와 SE-Bond의 사용이 효과적일 것으로 생각된다.

담수패류(Unio douglasiae)와 침수식물(Potamogeton crispus)의 유해 남조 Oscillatoria sp. 성장억제 효과 (Effect of a Freshwater Bivalve (Unio douglasiae) and a Submerged Plant (Potamogeton crispus) on the Growth Inhibition of a Cyanobacterium Oscillatoria sp.)

  • 김건희;김백호;박명환;황순진
    • 생태와환경
    • /
    • 제41권spc호
    • /
    • pp.68-76
    • /
    • 2008
  • 여과섭식성 이매패류인 말조개와 침수식물인 말즘이 남조류 성장억제에 미치는 영향을 실내 enclosure실험을 통해 분석하였다. 실험은 대형수조$(50cm{\times}65cm{\times}120cm)$에 남조대발생 수역의 퇴적물과 인공배지 (CB media)를 이용하여 인위적으로 남조대발생을 유도하고, 바닥 층으로 물과 유기물의 이동이 가능한 투명한 아크릴 소형원통(7L 용량)을 대조군 (3)과 처리구 (9)로 총 12개를 설치하였다. 처리구는 말즘처리구, 말조개처리구, 말조개와 말즘의 혼합처리구로 구분하였으며, 실험은 총 7일간 3반복으로 실시하였다. 수질요인들과 엽록소-${\alpha}$ 및 남조류 밀도는 실험기간동안 24시간 간격으로 분석하였다. 총인과 총질소 농도, 말조개와 말즘의 길이와 무게는 실험 시작 시와 종료 시에 분석하였다. 전반적으로 말조개와 말즘의 남조류 성장억제 효과가 뚜렷하게 나타났으며, 그 억제의 정도는 말조개, 말즘, 혼합처리구 순으로 나타났다. 각 생물의 개별 처리구에 비해 말조개+말즘 혼합처리구에서의 억제의 상승효과는 나타나지 않았다. 말즘 및 말즘+말조개 처리구에서 pH와 DO는 실험개시 후 각각 120, 144시간까지 점진적으로 감소하였다. 실험 7일 후 총인은 말조개 처리구에서 뚜렷한 증가를 보인 반면 총질소는 모든 처리구에서 감소하였다. 본 연구의 결과는 말조개와 말즘이 각각 남조류의 성장을 억제할 수 있는 잠재성이 있음을 의미한다. 그러나 이들을 동시에 적용할 경우에는 상승효과가 나타나지 않아 두 생물간의 간섭효과가 제기되었다. 그러나, 보다 정확한 혼합 처리의 효과를 파악하기 위해서는 보다 정밀한 실험설계를 수반하는 추가적인 연구가 필요할 것으로 판단되었다.

Modified Oxalate Method 의해 합성한 SOFC용(La0.6Sr0.4)(Co0.2Fe0.8)O3 Cathode의 pH 변화에 따른 특성 (Synthesis and Electrochemical Properties of (La0.6Sr0.4)(Co0.2Fe0.8)O3 cathode for SOFC on pH Control Using Modified Oxalate Method)

  • 이미재;최병현;김세기;박상선;이경희
    • 전기화학회지
    • /
    • 제10권4호
    • /
    • pp.288-294
    • /
    • 2007
  • Modified oxalate method에 의해 합성한 중온형 Solid Oxide Fuel Cell 용 LSCF cathoded의 pH 변화에 따른 분말특성 및 여러 종류의 전해질에 따른 전극특성에 대해 연구하였다. LSCF를 합성하기 위한 출발물질로는 La, Sr, Co 및 Fe의 염화물과 oxalic acid, ethanol 및 $NH_4OH$를 사용하여, $80^{\circ}C$ 에서 pH 2, 6, 7, 8, 9 및 10에서 합성하였다. 합성한 LSCF 분말은 pH $2{\sim}9$까지는 단일상의 LSCF 결정상을 생성하였다. 그러나, PH 10에서는 LSCF결정상 외에 이차상인 $La_2O_3$ 결정상이 나타났으며, 또한 $800^{\circ}C$에서 4시간 하소한 경우 50 nm정도의 작은 크기를 나타내었다. 합성한 LSCF cathode 분말의 전기전도도는 pH 7에서 합성한 LSCF 분말의 경우 $600^{\circ}C$부터 $900^{\circ}C$까지 측정하였을 때 약 950 S/cm의 높은 값을 나타내었다. 또한 분극저항의 경우 같은 합성 조건에서 합성한 LSCF 분말이라도 하소조건에 따라 다른 결과를 나타내었는데, $800^{\circ}C$에서 하소한 분말의 경우 $1200^{\circ}C$에서 하소한 분말 보다 낮은 분극저항을 나타내었다. 특히 $800^{\circ}C$에서 4시간 하소하여 합성한 LSCF 분말은 $600^{\circ}C$에서 Scandia Stabilized Zirconia (ScSZ), yttria (8mol.%)-stabilized zirconia(8Y-YSZ) 및 Gadolinium Doped Ceria(GDC) 전해질을 사용하였을 때, 전극면적이 $0.5\;cm^2$일 때 각각 2.52, 1.54 및 $2.58\;{\Omega}$을 나타내었다.

실험실규모 고온고압건식탈황공정의 수력학적 특성 및 탈황온도에 따른 아연계 탈황제의 반응특성 연구 (A Study of Hydrodynamics and Reaction Characteristics in Relation to the Desulfurization Temperatures of Zn-Based Solid Sorbent in the Lab-scale High Pressure and High Temperature Desulfurization Process)

  • 경대현;김재영;조성호;박영철;문종호;이창근;백점인
    • Korean Chemical Engineering Research
    • /
    • 제50권3호
    • /
    • pp.492-498
    • /
    • 2012
  • 본 연구에서는 고온고압 건식탈황장치를 이용하여 고체순환량과 탈황반응기 내의 공극률에 대한 수력학적특성을 파악하고, 아연계 탈황제의 고온고압 조건에서 탈황반응온도에 대한 반응특성 및 연속운전을 통한 탈황 효율을 분석하였다. 실험에 사용된 고온고압건식탈황장치는 고속유동층 형태의 탈황반응기(내경: 0.015 m, 높이: 6.2 m), 기포유동층 형태의 재생반응기(내경: 0.053 m, 높이: 1.6 m), 가스의 역흐름을 방지하는 loop-seal, 두 반응기 후단에 압력컨트롤밸브로 구성되어있다. 수력학 특성으로는 고체순환밸브 개구비, 탈황반응기 가스 유속, 탈황반응기 온도 변화에 따른 고체순환량과 각 조건에서의 고속유동층 형태의 탈황반응기 높이에 따른 공극률 분포를 알아보았다. 고체순환량은 동일한 유속조건, 동일한 고체순환밸브 개구비에서 탈황반응기 온도가 상온일 때보다 $300^{\circ}C$$550^{\circ}C$일 때 감소하였으며 $300^{\circ}C$$550^{\circ}C$ 조건에서는 큰 차이가 없었다. 탈황반응기내의 공극률은 고체순환밸브 개구비가 10~20%로 고체순환량이 적은 경우 고속유동층 형태의 공극률 분포를 보이고, 30~40%로 고체순환량이 많아지는 경우 탈황반응기 하부에서 turbulent 형태의 공극률의 분포를 나타냈다. 아연계 탈황제의 탈황반응온도에 따른 반응특성은 시스템 압력 20 atm, 연속 반응 조건에서 탈황 온도를 변화시키면서 살펴보았다. 일정한 고체순환 조건에서 탈황온도 $450^{\circ}C$ 이하에서 탈황 효율 저하가 시작되는 것을 확인하였으며, 높은 탈황 효율을 유지시키기 위하여 10시간 연속운전에서는 탈황 반응 온도를 $500^{\circ}C$로 설정하여 실험하였다. 실험 결과, 10시간 연속운전을 통해, 유입 $H_2S$ 농도 5,000 ppmv 조건에서 탈황 반응기 후단 $H_2S$ 농도는 UV분석기(Radas2)와 검지관(GASTEC)의 검출한계인 1 ppmv 이하를 유지하여 $H_2S$ 제거 효율 99.99% 이상을 달성하였다.

온실재배 케일의 생장에 미치는 보광효과 (Effect of Supplementary Radiation on Growth of Greenhouse-Grown Kales)

  • 허정욱;김현환;이광재;윤정범;이정관;허윤선;이기열
    • 한국환경농학회지
    • /
    • 제34권1호
    • /
    • pp.38-45
    • /
    • 2015
  • 자연일장이 짧은 조건에서 온실과 같은 시설에서는 인위적으로 일장을 연장하여 작물 생육을 촉진하기 위해서 고압나트륨등, 백열등과 메탈할라이드등과 같은 다양한 인공광원을 이용하여 보광한다. 기존의 인공광원은 전력소모량이 높기 때문에 발광다이오드와 같이, 램프 수명이 길고 전력소모량이 적은 광원을 이용한 보광재배가 시도되고 있다. 녹즙용 엽채류의 하나인 케일을 재배하는 온실내에 삼파장등, 나트륨등 및 적색의 발광다이오드를 인공광원으로 하여 1일 3~6시간 보광하여 재배한 결과, 케일 잎의 생체중 및 건물중은 보광강도 $1.2{\mu}mol/m^2/s$ 적색 LEDs 보광구, $12{\mu}mol/m^2/s$ 삼파장등 보광구와 나트륨 보광구에서 보광하지 않은 자연광구에 비해 유의하게 증가하였다. 적색 LEDs 보광구에서는 보광강도가 증가할수록 케일 잎내 당합성량이 유의하게 증가하였으며, 평당 수확량 또한 최대값을 나타내었다. 본 실험을 통하여 온실조건에서 일출 및 일몰시 삼파장등, 나트륨등 및 적색 LEDs 인공광을 이용한 보광광원 및 광질을 제어하는 보광재배로, 케일 잎의 생체중, 건물중, 엽내 당합성 및 수확량을 증가시킬 수 있었다. 특히, 보광강도 $1.2{\mu}mol/m^2/s$의 적색 LEDs는 삼파장등이나 나트륨등에 비해 전기에너지 소모량을 절감하면서 케일 잎의 생장 및 수확량을 유의하게 증가시킨 것으로 보아 보광광원으로서의 이용성이 기대된다.

치의학 교육을 위한 프로토타입 시뮬레이터의 개발 (Development of a prototype simulator for dental education)

  • 김미엘;심재훈;에인 몬;김명주;박영석;권호범;박재흥
    • 대한치과보철학회지
    • /
    • 제61권4호
    • /
    • pp.257-267
    • /
    • 2023
  • 목적. 이 연구의 목적은 치의학 교육을 위한 프로토타입 로봇 시뮬레이터를 제작하고, 하악운동을 시뮬레이션 할 수 있는지 여부를 테스트하며, 치과실습 중 자극에 대한 시뮬레이터의 반응 가능성을 평가하는 것이었다. 재료 및 방법. 가상 시뮬레이터 모델은 cone-beam computed tomography (CBCT) 데이터를 사용하여 경조직을 구획화한 후 제작되었다. 시뮬레이터의 프레임은 polylactic acid (PLA) 소재를 사용하여 3D 프린팅 되었으며, 덴티폼과 실리콘 얼굴 스킨을 장착하여 모델을 형성하였다. 서보 액추에이터는 시뮬레이터의 움직임을 제어하는데 사용되었고, 다양한 센서들로 시뮬레이터의 반응을 생성하였다. 수위 센서가 반응하는 물의 양을 측정하기 위해 수위테스트가 수행되었다. 또한, 컴퓨터 시뮬레이션과 실제 모델을 통해 시뮬레이터의 하악운동과 하악운동 범위를 테스트하였다. 결과. 프로토타입 로봇 시뮬레이터는 작동 장치, 전기 장치가 있는 상반신, 턱관절을 포함하는 머리 및 덴티폼으로 구성되었다. 시뮬레이터의 턱관절은 회전 및 병진 운동을 구현하면서 2자유도를 구동할 수 있었다. 수위 테스트에서 수위 센서의 특정 임계값은 10.35 ml였다. 컴퓨터 시뮬레이션과 실제 모델 모두에서 인간의 움직임을 모방하였고, 시뮬레이터의 하악운동 시 개구범위는 50 mm였다. 결론. 효율성과 안정성을 개선하기 위해서는 더 많은 발전이 필요하지만, 본 상반신 프로토타입의 시뮬레이터는 향후 치과실습 교육에 잠재적으로 유용할 것으로 기대된다.

Moire 영상을 이용한 근골격계 질환의 한의학적 진단에 관한 연구 (A Study on Oriental Medical Diagnosis of Musculoskeletal Disorders using Moire Image)

  • 이은경;유승현;이수경;강성호;한종민;정명수;천은주;송용선;이기남
    • 대한예방한의학회지
    • /
    • 제4권2호
    • /
    • pp.72-92
    • /
    • 2000
  • This research has conducted studies on an Oriental medicine-based method of diagnosing of occupational musculoskeletal system diseases. This researcher has searched through existing relevant medical literature. Also, this researcher has worked on a moire topography using moire topography. In this course, this researcher has reached the following conclusion in relation to the possibility of using a moire topography as a diagnosing device of musculoskeletal system diseases under Oriental medicine . 1 The Western medicine outlines its criteria of screening occupational musculoskeletal system diseases as follows A. The occupational musculoskeletal diseases must clearly include one or more of the subjective symptoms characterized by pain, hypoesthesia dysaesthesia, anaesthesia. etc . B, There should be clinically admitted objective observations and diagnosis outlining that the disease concerned shows symptoms such as tenderness, induration. and edema that can appear with occupational musculoskeletal system diseases. dyscinesia should be admitted with the disease concerned, or there should be observations and diagnosis outlining that abnormality exists in electric muscular or nervous diagnosis and examination . C. It should be admitted that prior to the occurrence of symptoms or observations and diagnosis on musculoskeletal system-related diseases, a patient has been engaged in works with conditions requiring improper work posture or work movement. That is, this is an approach whereby they see abnormality in the musculoskeletal system come from material and structural defect, and adjust and control abnormality in the musculoskeletal system and secreta . 2. The Oriental medicines sees that a patient develops the pain of occupational musculoskeletal diseases as he cannot properly activate the flow of his life force and blood thus not only causing formation of lumps in the body and blocking the flow of life force and blood in some parts of the body. Hence, The Oriental medicine focuses on resolving the cause of weakening the flow of life force and blood, instead of taking material approach of correcting structural abnormality Furthermore , Oriental medicine sees that when muscle tension builds up, this presses blood vessels and nerves passing by, triggering circulation dyscrasia and neurological reaction and thus leading to lesion. Thus, instead of taking skeletal or neurophysiological approach. it seeks to fundamentally resolve the cause of the flow of the life force and blood in muscles not being activated. As a result Oriental medicine attributes the main cause of musculoskeletal system diseases to muscle tension and its build-up that stem from an individual's long formed chronicle habit and work environment. This approach considers not only the social structure aspect including companies owners and work environment that the existing methods have looked at, but also individual workers' responsibility and their environmental factors. Hence, this is a step forward method. 3 The diagnosis of musculoskeletal diseases under Oriental medicine is characterized by the fact that an Oriental medicine doctor uses not only photos taken by himself, but also various detection devices to gather information and pass comprehensive judgment on it. Thus, it is the core of diagnosis under Oriental medicine to develop diagnosing devices matching the characteristics of information to be induced and to interpret information so induced from the views of Oriental medicine. Diagnosis using diagnosing devices values the whole state of a patient and formal abnormality alike, and the whole balance and muscular state of a patient serves as the basis of diagnosis. Hence, this method, instead of depending on the information gathered from devices under Western medicine, requires devices that provide information on the whole state of a patient in addition to the local abnormality information that X-ray. CT, etc., can offer. This method sees muscle as the central part of the abnormality in the musculoskeletal system and thus requires diagnosing devices enabling the muscular state. 4. The diagnosing device using moire topography under Oriental medicine has advantages below and can be used for diagnosing musculoskeletal system diseases with industrial workers . First, the device can Provide information on the body in an unbalanced state. and thus identify the imbalance and difference of height in the left and right stature that a patient can not notice at normal times. Second, the device shows the twisting of muscles or induration regions in a contour map. This is not possible with existing shooting machines such as X-ray, CT, etc., thus differentiating itself from existing machines. Third, this device makes it possible for Oriental medicine to take its unique approach to the abnormality in the musculoskeletal system. Oriental medicine sees the state and imbalance state in muscles as major factors in determining the lesion of musculoskeletal system, and the device makes it possible to shoot the state of muscles in detail. In this respect, the device is significant. Fourth, the device has an advantage as non-aggression diagnosing device.

  • PDF

첨단산업의 환경동태성이 공급체인의 결속에 미치는 영향: 유연성과 의존성의 역할 (The Effects of Environmental Dynamism on Supply Chain Commitment in the High-tech Industry: The Roles of Flexibility and Dependence)

  • 김상덕;지성구
    • 마케팅과학연구
    • /
    • 제17권2호
    • /
    • pp.31-54
    • /
    • 2007
  • 첨단산업의 기업들은 환경의 변화에 효과적으로 대응하는 것을 기업 성패에 중요한 요인으로 여기고 있다. 하지만 첨단산업의 환경 동태성이 공급체인 구성원 간 관계 결속에 미치는 영향에 관한 연구가 부족하여, 환경 변화에 효과적인 대응을 어렵게 하고 있다. 본 연구는 첨단산업에서 환경 동태성이 공급체인의 결속에 영향을 미치는 메커니즘에 대해 규명하고 있다. 좀 더 구체적으로 말하면, 첫째, 첨단산업의 고객, 경쟁, 기술 동태성이 공급체인의 결속에 어떠한 영향을 미치는지, 둘째, 공급체인의 유연성과 의존성이 이러한 영향에 어떠한 조절효과를 가지는 지 실증하고 있다. 구조방정식 모형에 의한 가설검정 결과 첨단산업의 고객 동태성은 공급체인의 결속을 약화시켰지만 경쟁 동태성은 강화시키는 역할을 하였다. 한편 유연성과 의존성은 고객과 경쟁 동태성에 유의적인 조절 효과를 가졌다.

  • PDF