• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.185-190
• /
• 2003

The most shortcoming of metalhalide lamps is what the instant restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition. Therefore it takes about five minutes to restart the metalhalide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 20kV at the both sides of lamp. The proposed electronic ballast is consist of a electromagnetic interference (EMI) filter, a power factor correction (PFC) circuit, a flyback converter, a half-bridge inverter, and a high voltage igniter circuit. By this composition we can restart the lamp with the voltage 20kV, even if the lamp is in the hot condition.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.290-299
• /
• 2016

The most powerful energy resource in nature is solar energy which becomes directly converted to electric power in worldwide. Most of the photovoltaic power plants are commonly installed on sunny side of the ground. Thus the installation of photovoltaic power plant could produce an unexpected adverse effect by sacrificing the productivity from green field or forest. To avoid these adverse effect floating photovoltaic plant has been devised and installed on inland reservoir. The photovoltaic plant could utilize ignored water surface without sacrificing the productivity of the ground. Additionally the photovoltaic efficiency has been reenforced by the cooling effect induced by the circulating air flow from water surface. The floating photovoltaic plant could be furnished solar tracking ability by tilting the system operated with the aid of the ballast system. This report is provided to introduce the design of the floating structure with solar panel which furnished solar tracking ability with the aid of ballast system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권1호
• /
• pp.60-66
• /
• 2015

In this paper, The infrastructure case for reproduction or analysis of the mechanism on the fire or the electrics shock of the electrical appliances is proposed. The various electrical appliances(Washing machine, Ballast, Electric heaters, Electronic switches, Mobile phone chargers) used in the home can be tested on the high voltage and over current test through the implementation of the infrastructure. The electrical tests of fire and electric shock consists of the high voltage of maximum 5000 V and over current test of 3 steps(90 A, 60 A, 40 A) and noise test. The mechanism of the fire and the electric shock tests reproduced are analyzed through the monitoring system and the oscilloscope. The electronics manufacturers can prevent accidents through the tests of the electronics factor reproduced and the analysis of the infrastructure designed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.544-545
• /
• 2010

전자식 안정기의 초기구동 시, 발생되는 입력단의 높은 돌입전류는 전자식 안정기 내의 전파정류다이오드 및 능동 역률보상회로의 파손원인이 되며, 제품의 신뢰성을 감소시키는 큰 요인으로 지목된다. 따라서 안정기의 입력에서 발생되는 돌입전류를 분석하고 제한하는 방법이 필요하다. 본 논문은 250W CDM(Ceramic Discharge Metal-halide) 램프용 DBI(Dual Buck Inverter) 구조의 전자식 안정기에서 초기 구동 시 높은 돌입전류가 발생되는 원인을 분석하고, 해결책을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.99-102
• /
• 2002

T5 28 Watt 형황등용 전자식 안정기에 대한 제품설계 및 램프 수명 관계를 고찰하고 정확한 이해를 토대로 각 제품의 국제적인 기술 기준(IEC60928, 60929)으로 Fault Condition 시험, 램프수명 테스트, 전자파장해 시험을 위주로 시험하여 분석하였다.

• 한국철도학회논문집
• /
• 제18권2호
• /
• pp.139-148
• /
• 2015

자갈궤도에서 레일과 침목을 연결하는 체결장치의 레일패드 강성이 증가함에 따라 윤중이 증가하고 궤도틀림진전이 증가되어 궤도유지보수비가 증가하게 된다. 반면에 레일패드강성이 감소하면 차량운행에 따른 전력소모비가 증가하게 된다. 따라서 자갈궤도 설계 시에 차량과 궤도 및 운영조건을 고려하여 궤도유지보수비와 전력소모비를 가급적 작게 할 수 있는 적정 레일패드강성을 결정하는 것은 철도 경제성 확보차원에서 중요한 과제라 할 수 있다. 본 연구에서는 L$\acute{o}$pez Pita 등이 제시한 자갈궤도에서의 최적레일패드 강성을 평가하는 프로세서를 기초로 적정 레일패드강성 범위를 구하였다. 연구결과에 중요한 영향을 주는 레일패드강성에 따른 윤중변화를 보다 정확하게 평가하기 위하여 궤도구성품의 거동특성을 보다 상세하게 고려할 수 있는 고도화된 수치해석적 기법을 사용하여 평가하였다. 또한 국내에서의 차량, 궤도 운영조건을 고려함으로써 국내에서 궤도설계에 적용할 수 있는 적정 레일패드강성 범위를 도출하였다.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.9-15
• /
• 2004

메탈핼라이드 램프의 가장 큰 단점중 하나는 아크튜브가 뜨거운 상태에서는 순시 재점등이 불가능하다는 것이다. 메탈핼라이드 램프의 점등중 고온의 아크튜브는 초기 램프가 차가운 상태에서의 방전 전압보다 재점등 방전전압이 높아 재점등 시키는데 압력과 온도가 감소되어지는 약5분정도의 시간이 소요 된다. 만약 램프가 뜨거운 상태에서 재점등시키려면 램프전극 양단에 약20[kV] 이상의 높은 전압펄스를 공급해야한다. 따라서 이러한 목적의 전자식 안정기는 EMII필터, PFC회로, 플라이백 컨버터, 하프브리지 인버터, 고전압 이그나이터 회로로 구성되는데 이것은 순시점등은 물론 램프가 뜨거운 상태에서도 20[kV]의 전압으로 램프를 점등/재점등 할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.707-716
• /
• 2011

It has been applied using cranes or insertion methods to install heavy structures to strengthen existing railway bridges. These methods are uneconomical because of two reasons. The first one is it is required to construct approach roads for heavy equipment and/or working yard. The second one is the electric lines shall be cutoff during construction. Both require additional construction cost and duration. In this study, new transport equipment was developed which can be applied to heavy structures up to 100 ton. Using this method, the heavy structure can be loaded into the new transport equipment at working yard and transported to the working site. This method can be applied, but not limited to railway bridge or roadbed rehabilitation. It was found that the precious construction can be achieved to install heavy structure using this method. The experimental construction to make non-ballast girder bridge composite with new pc deck slab using this method was carried out for Jewon bridge. The example bridge is in extreme condition because it locates above national road #38 within extreme transition curve and has 10 ‰ slope and skew. The experimental construction results were satisfactory both for safety and construction precision.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.171-171
• /
• 2010

An innovative design of a floating-buoy wave energy converter (WEC) using hydrostatic transmission (HST), named HSTWEC, is presented in this paper. The system is designed to convert ocean wave fluctuation into electricity by using the HST circuit and an electric generator. Based on the floating-buoy concept, the wave forces the sub-buoy to move up and down. Consequently, the electric power can be obtained from the generator in both the moving directions of the sub-buoy through the HST circuit as shown in Fig. 1. In order to investigate the HSTWEC operations, a mathematical model of the system is indispensible. In addition, the method to control the HSTWEC, including: pump displacement control, tension adjustment control and ballast weight control, is also discussed in this paper. Finally, the design concept as well as simulation results indicated that this HSTWEC design is an effective solution and possible to fabricate for wave energy generation.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1175-1182
• /
• 2014

In this study, we examined the effect of cathode from electrolysis reactor for treating ballast water. We are going to select a suitable cathode for seawater electrolysis after considering the effect on the generation of the oxidant of cathode and the electrode deposition materials adhering to the surface of cathode. Anode is Ru-Ti-Pd electrode and cathode are Ti, Pt, JP520 (Ni-Pt-Ce) electrodes. Using the cathode of the three types, experiments were conducted to examine the effects of TRO (total residual oxidants) generation concentration and RNO (N, N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical) degradation concentration (in 1, 35 psu), ohmic drop, FESEM(field emission scanning electron microscope) observation of cathode surface and EDX (energy dispersive X-ray spectroscopy) measurements of attached fouling material. The results showed that TRO generation concentration and RNO degradation concentration in according to each type of cathode are not different. The attached fouling materials were observed on the surface of Ti and the JP520 electrode by the observation of SEM after electrolysis for two hours, but it was not observed on the surface of Pt electrode. When considering the surface ohmic drop of cathode and the attached fouling materials, Pt electrode was judged as the excellent cathode.