• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.66-73
• /
• 2014

This study was considered to occur the local wall thinning at elbow which is flowing the steam and high-pressure water of high-temperature. The angle of elbow is ${\Theta}=45^{\circ}$ and $67.545^{\circ}$. The damage behaviors of inner or outer wall thinning elbow under internal pressure were calculated by FEA(finite element analysis). We compared the simulated results by FEA with experimental data. The FEA results are as follows: In the FEA results of three types of wall thinning ratio, the circumferential and longitudinal stresses show the similar values regardless of the angle of elbow, respectively. The circumferential strain was greater at elbow of small angle, but the longitudinal strain was nearly same. The FEM stress of outer wall thinning elbow was slightly higher than that of the inner wall thinning elbow, and strain was also slightly higher. In the experiments, the circumferential strain was increased with the increase in the internal pressure, and increased rapidly on about 0.2% of strain. The longitudinal strain was small. The strain at break was much smaller than 0.2%. In the relation between pressure and eroded ratio, the criteria that can be used safely under operating pressure and design pressure were obtained. The results of FEA were in relatively good agreement with those of the experiment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.112-119
• /
• 2021

The failure mode of piping systems due to seismic loads is the low-cycle fatigue failure with ratcheting, and it was found that the element in which nonlinear behavior is concentrated and damage occurs is the elbow. In this study, to quantitatively express the failure criteria for a pipe elbow of SCH40 3-inch carbon steel under low-cycle fatigue, the limit state was defined as leakage, and the in-plane cyclic loading test was conducted. For the carbon steel pipe elbow, which is the vulnerable part to seismic load of piping systems, the damage index was represented using the moment-deformation angle relationship, and it was compared and analyzed with the damage index calculated using the force-displacement relationship. An attempt was made to quantitatively express the limit state of the carbon steel pipe elbow involving leakage using the damage index, which was based on the dissipated energy caused by repeated external forces.

• Clinics in Shoulder and Elbow
• /
• v.19 no.4
• /
• pp.256-263
• /
• 2016

Although arthroscopic surgery has been used conventionally, it has not been widely adopted yet due to the risks of complications, including nerve damage, technical difficulties, and limited indications. As shown in other joints, however, the use of an arthroscope will gradually increased in the elbow joint ('Arthroscopy always wins'). Herein, arthroscopic treatments and arthroscopic ulnar nerve decompression will be discussed in cases of elbow osteoarthritis.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.67-74
• /
• 2008

Repetitive overhead throwing exerts significant mechanical stress on the elbow joint. Pitching in baseball, serving in tennis, spiking in volleyball, passing in American football and launching in javelin-throwing can all produce elbow pathology by forceful valgus stress, with medial stretching, lateral compression and posterior impingement. This stress can lead to developmental anatomic changes in the young thrower. Asymptomatic pathology in the shoulder and elbow joint is prevalent and, with overuse, can progress to disabling injury. Joint injury occurs as a result of the body's inability to properly coordinate motion segments during the pitching delivery, leading to further structural damage. The implications of acute and overuse injuries and the possibility of permanent damage should be understood by parents, coaches and the athletes. Proper understanding of the intrinsic and extrinsic risk factors that could lead to elbow injuries is thus required. Measures to prevent elbow injuries should include proper coaching, warm-up, medical expertise and protective gear. Injury prevention and rehabilitation should center on optimizing pitching mechanics, core strength, scapular control, and joint range of motion.

• Clinics in Shoulder and Elbow
• /
• v.6 no.2
• /
• pp.127-130
• /
• 2003

Arthroscopy of the elbow is a very precise and demanding procedure due to the closeness of the recommended portals to neurovascular structures and complexity of articular geometry. So to establish safe portal is not always reproducible especially in case of stiff elbow, even for the experienced arthroscopist. We described new tip of elbow arthroscopy using a new starting portal. This procedure is almost always reproducible even in stiff elbow, and minimizes risk of damage to neurovascular structures.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.245-253
• /
• 2017

The relative displacement of a piping system installed between isolated and nonisolated structures in a severe earthquake might be larger when without a seismic isolation system. As a result of the relative displacement, the seismic risks of some components in the building could increase. The possibility of an increase in seismic risks is especially high in the crossover piping system in the buildings. Previous studies found that an elbow which could be ruptured by low-cycle ratcheting fatigue is one of the weakest elements. Fatigue curves for elbows were suggested based on component tests. However, it is hard to find a quantitative evaluation of the ultimate state of piping elbows. Generally, the energy dissipation of a solid structure can be calculated from the relation between displacement and force. Therefore, in this study, the ultimate state of the pipe elbow, normally considered as failure of the pipe elbow, is defined as leakage under in-plane cyclic loading tests, and a failure estimation method is proposed using a damage index based on energy dissipation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.3
• /
• pp.435-451
• /
• 2015

Evaluation of the performance of aging structures is essential in the oil and gas industry, where the inaccurate prediction of structural performance can have significantly hazardous consequences. The effects of structure failure due to the significant reduction in wall thickness, which determines the burst strength, make it very complicated for pipeline operators to maintain pipeline serviceability. In other words, the serviceability of gas pipelines and elbows needs to be predicted and assessed to ensure that the burst or collapse strength capacities of the structures remain less than the maximum allowable operation pressure. In this study, several positions of the corrosion in a subsea elbow made of API X42 steel were evaluated using both design formulas and numerical analysis. The most hazardous corrosion position of the aging elbow was then determined to assess its serviceability. The results of this study are applicable to the operational and elbow serviceability needs of subsea pipelines and can help predict more accurate replacement or repair times.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.1013-1021
• /
• 2001

A series of rabbit common extensor tendon specimens of the humeral epicondyle were subjected to tensile tests under two displacement rates (100mm/min and 10mm/min) and different elbow flexion positions 45°, 90°and 135°. Biomechanical properties of ultimate tensile strength, failure strain, energy absorption and stiffness of the bone-tendon specimen were determined. Statistically significant differences were found in ultimate tensile strength, failure strain, energy absorption and stiffness of bone-tendon specimens as a consequence of different elbow flexion angles and displacement rates. The results indicated that the bone-tendon specimens at the 45°elbow flexion had the lowest ultimate tensile strength; this flexion angle also had the highest failure strain and the lowest stiffness compared to other elbow flexion positions. In comparing the data from two displacement rates, bone-tendon specimens had lower ultimate tensile strength at all flexion angles when tested at the 10mm/min displacement rate. These results indicate that creep damage occurred during the slow displacement rate. The major failure mode of bone-tendon specimens during tensile testing changed from 100% of midsubstance failure at the 90°and 135°elbow flexion to 40% of bone-tendon origin failure at 45°. We conclude that failure mechanics of the bone-tendon unit of the lateral epicondyle are substantially affected by loading direction and displacement rate.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.1
• /
• pp.8-14
• /
• 2008

Elbow joint injuries during exercise mostly occur by repeated stress to the joint than direct trauma. A pitcher who uses his arm above his head is most likely to be injured. So learning the right way to exercise and gaining the strength by maturating the body are essential for diminishing the chance of injury. On lateral ulnar tendon injury, which is most commonly injured area on elbow joint, pitchers generally complain of pain in arm movement above head and reduction of velocity, accuracy, and number of pitching. When there is pain on upper arm in harsh using, the stress fracture must be thought and epicondylar physis fracture of medial arm can occur by repeated abduction stress and contraction of flexors on forearm on children with immature skeleton. Osteochondritis dissecans of capitullum occur in young athletes who use there upper limb continuously lifting weights and gym work. And stress of abduction-extension includes damage of soft tissue and bone components, post medial crush syndrome, lateral ulnar ligament injury, extensor-abductor injury, stress of radius- capitullum are in this category.

• Archives of Plastic Surgery
• /
• v.39 no.2
• /
• pp.137-137
• /
• 2012

Fast improvements in microsurgery have opened new strategies in the field of reconstructive trauma surgery that can be applied to severe elbow trauma management. The disadvantages of pedicle flaps can be overcome in the hand of an experienced trauma surgeon by using free flaps based on the perforators. This provides the patient with the best possible wound cover within the optimal time frame and the treatment of underlying additional structural damage. Although the authors presented only a small number of cases, the results of this study are promising and encourage the use of the ALT flap for the treatment of severe elbow trauma.