• Steel and Composite Structures
• /
• 제14권6호
• /
• pp.571-586
• /
• 2013

This paper focuses on the buckling capacity of a hybrid grid shell. The eigenvalue buckling, geometrical non-linear elastic buckling and elasto-plastic buckling analyses of the hybrid structure were carried out. Then the influences of the shape and scale of imperfections on the elasto-plastic buckling loads were discussed. Also, the effects of different structural parameters, such as the rise-to-span ratio, beam section, area and pre-stress of cables and boundary conditions, on the failure load were investigated. Based on the comparison between elastic and elasto-plastic buckling loads, the effect of material non-linearity on the stability of the hybrid barrel vault is found significant. Furthermore, the stability of a hybrid barrel vault is sensitive to the anti-symmetrical distribution of loads. It is also shown that the structures are highly imperfection sensitive which can greatly reduce their failure loads. The results also show that the support conditions pose significant effect on the elasto-plastic buckling load of a perfect hybrid structure.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2245-2252
• /
• 2002

Design sensitivity analysis scheme is proposed in an elasto -plastic finite element method with explicit time integration using a direct differentiation method. The direct differentiation is concerned with large deformation, the elasto-plastic constitutive relation, shell elements with reduced integration and the contact scheme. The design sensitivities with respect to the process parameter are calculated with the direct analytical differentiation of the governing equation. The sensitivity results obtained from the present theory are compared with that obtained by the finite difference method in a class of sheet metal forming problems such as hemi-spherical stretching and cylindrical cup deep-drawing. The result shows good agreement with the finite difference method and demonstrates that the preposed sensitivity calculation scheme is a pplicable in the complicated sheet metal forming analysis and design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.402-407
• /
• 2001

Sensitivity analysis scheme is developed in the elasto-plastic finite element method with explicit time integration using direct differentiation method. The direct differentiation is concerned with the time integration, constitutive relation, shell element with reduced integration and the contact scheme. Sensitivity analysis results are mainly examined with the highly nonlinear and quasi-static problem with the complicated contact condition. The result shows stable sensitivity especially in the sheet metal forming analysis.

• Journal of Ship and Ocean Technology
• /
• 제8권3호
• /
• pp.40-49
• /
• 2004

Welding deformations injure the beauty of appearance of a structure, decrease its buckling strength and prevent increase of productivity. Welding deformations of real structures are complicated and the accurate prediction of welding deformations has been a difficult problem. This study proposes a method to predict the welding deformations of large structures accurately and practically based on the simplified thermal elasto-plastic analysis method. The proposed method combines the inherent strain theory with the numerical or theoretical analysis method and the experimental results. The weld joint is assumed to be divided into 3 regions such as inherent strain region, material softening region and base metal region. Characteristic material properties are used in structural modeling and analysis for reasonable simplification. Calculated results by this method show good agreement with the experimental results. It was proven that this method gives an accurate and efficient solution for the problem of welding deformation calculation of large structures.

• 한국전산구조공학회논문집
• /
• 제22권5호
• /
• pp.487-499
• /
• 2009

컴퓨터의 성능이 향상되고 해석 알고리즘이 개선될수록 유한요소 모델링은 정교해지고 복잡해지는 경향이 있으며, 그에 상응하여 후처리 기술도 다양하게 발전하게 되었다. 이와같이 하드웨어적, 소프트웨어적인 진전을 바탕으로 탄소성해석에서는 더욱 세분화된 단계적 증분과 반복의 중간 계산 결과를 이용하여 탄소성 거동을 관찰하고 분석하는 것이 실용적인 의미를 갖게 되었다. 이 논문은 유한요소해석을 통해서 얻은 계산 결과로 부터 탄소성 재료의 역학적인 거동을 이론적으로 구성하고, 컴퓨터 그래픽스로 가시화하는 새로운 후처리 방법에 관하여 기술하였다. 또한 소성 거동의 진행을 표현하는 새로운 방법과 해석의 중간단계에서 생성된 데이터를 항복곡면과 응력경로의 형태로 재구성하거나 또는 Mohr원과 파괴포락선의 형태로 재구성하여 탄소성 거동을 분석하고 이해하는 방법을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제8권3호
• /
• pp.233-242
• /
• 1999

In the present study, the elasto-plastic analysis of prismatic plate structures subjected to pure bending is carried out using the finite strip method. The end cross-sections of the structure are assumed to remain plane during deformation, and the compatibility along corner lines is ensured by choosing proper displacement functions. The effects of both the initial geometrical imperfections and residual stresses due to fabrication are included in the combined geometrically and materially nonlinear simulation. The von-Mises yield criterion and the Prandtl-Reuss flow theory of plasticity are applied in modelling the elasto-plastic behavior of material. Newton-Raphson iterations are carried out as the rotation of the end cross sections of the structure is increased step by step. The parameter representing the overall axial strain of structure is adjusted constantly during the iteration process in order to eliminate the resulting overall axial force on any cross-section of the structure in correspondence with the assumption of zero axial force in pure bending. Several numerical examples are presented to validate the present method and to investigate the effects of some material and geometrical parameters.

• 한국강구조학회 논문집
• /
• 제21권6호
• /
• pp.597-608
• /
• 2009

본 연구에서는 접합부 특성이 고려된 공간프레임의 대변형 탄소성해석법에 관한 내용을 기술한다. 이 해석법은 유한변형을 고려한 대변형 탄성해석법에 기초한 것으로 부재의 재료적 탄소성, 접합부 반강접 특성을 추가적으로 고려하였다. 절점의 유한변형은 오일러의 개념으로 부터 유도되었으며, 부재좌표계에서 계산된 부재변형은 보-기둥식에 대입하여 부재력을 계산하였다. 부재변형은 부재축변형과 휨에 의한 축변형효과를 함께 고려하여 계산하였으며, 부재축력의 휨강성, 비틀림강성에 대한 효과를 고려하여 항복함수를 계산하였다. 재료는 완전 탄소성으로 가정하였고, 항복은 부재 양단부에서 집중하여 발생하는 소성힌지의 개념을 사용하였다. 부재 접합부 반강접 특성은 지수모델이나 선형모델을 적용하였고, 접합부 특성이 고려된 탄소성 후좌굴해석을 수행하기 위해 호장법을 사용하였다. 본 연구내용의 정확성 및 효율성을 검증하기 위해 공간프레임에 대한 해석을 수행하였다.

• 대한조선학회논문집
• /
• 제30권1호
• /
• pp.145-156
• /
• 1993

대변형, 대회전, 대변형도 문제를 고려한 탄소성-손상 유한요소 정식화 과정을 연구함으로써 구조물의 모든 비선형 거동 및 손상을 합리적으로 예측할 수 있는 수치모형을 개발하였다. 재료의 소성 변형과정에서 발생되는 손상을 합리적으로 고려하기 위하여 연속체 손상역학의 접근방법을 이용하여 구성방정식을 정식화하였으며 Updated Lagrangian 정식화방법, 호장증분법 등의 비선형 강성방정식 해법을 적용하여 2차원 평면문제를 대상으로 하는 탄소성-손상 유한요소해석 프로그램을 구성하였다. 여러가지 예제 계산을 통하여 이 수치모형의 적용성 및 타당성을 검토한 결과 대변형 문제, 손상을 포함하는 재료 비선형문제 공히 합리적인 해석결과를 제시하고 있슴을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.507-512
• /
• 1997

The objective of present paper is to provide the fundamental data of earthquake-resistance design such as estimating the resistance capacity and evaluating the design seismic load. With one bending failed building, it is checked and compared between real damaged result and analysis value by means of static and dynamic analysis using multi-degree of freedom system. In this analysis, four kinds of the earthquake waves are used. Through elasto-plastic seismic response analysis of reinforced concrete building, we could estimate dynamic behaviour of building.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.105-112
• /
• 1992

The main purpose of this study is to derive a law of fatigue crack growth rate in the region of elastic or elasto-plastic fracture mechanics at elevated temperatures through the application of dimensional analysis. An equation of elasto-plastic fatigue crack growth rate at elevated temperatures appeared a new Arrhenius type equation containing J-integral range and absolute temperature. The elastic or elasto-plastic crack growth rate equation shows a fairly good agreement with the experimental results for Cr-Mo-V rotor steel and Hastelloy-X alloy in the comparatively wide temperature ranges.