• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.137-148
• /
• 2019

Korean piloti-type buildings are comprised of pilotis in the first story and shear walls in the upper stories. This vertical irregularity causes excessive lateral plastic deformation on the first story while the upper stories stay elastic. Meanwhile, asymmetric position of structural components such as core walls and columns of RC piloti-type buildings tends to produce torsional irregularities of the structures. Korean Building Code(KBC2016) requires the special seismic load and torsional amplification factor to apply to the piloti-type buildings lower than six-story or 20m if it has vertical and torsional irregularities when the building corresponds to seismic design category C or D. Many Korean low-rised RC buildings fall into the class. Therefore, the special earthquake load and torsional amplification factor are often applied to a building simultaneously. However, it has not been studied enough how much influence each parameter has on buildings with vertical and torsional irregularities at the same time. The purpose of this study is to evaluate the effect of factor special seismic load and torsional amplification on seismic performance of irregular buildings. In this study, a damaged 4^th story piloti-type building by the Pohang earthquake was selected and the earthquake response analysis was carried out with various seismic design methods by the KBC 2016. The effect of the design parameters on seismic performance was analyzed by the dynamic analysis of models with special seismic load and torsional amplification factor based on the selected building. It was concluded that the application of the torsional amplification factor to the reference model to which special seismic design was applied, does not significantly affect the seismic performance.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.399-414
• /
• 2020

A floating bridge is an innovative solution for deep-water and long-distance crossing. This paper presents a curved floating bridge's dynamic behaviors under the wind, wave, and current loads. Since the present curved bridge need not have mooring lines, its deep-water application can be more straightforward than conventional straight floating bridges with mooring lines. We solve the coupled interaction among the bridge girders, pontoons, and columns in the time-domain and to consider various load combinations to evaluate each force's contribution to overall dynamic responses. Discrete pontoons are uniformly spaced, and the pontoon's hydrodynamic coefficients and excitation forces are computed in the frequency domain by using the potential-theory-based 3D diffraction/radiation program. In the successive time-domain simulation, the Cummins equation is used for solving the pontoon's dynamics, and the bridge girders and columns are modeled by the beam theory and finite element formulation. Then, all the components are fully coupled to solve the fully-coupled equation of motion. Subsequently, the wet natural frequencies for various bending modes are identified. Then, the time histories and spectra of the girder's dynamic responses are presented and systematically analyzed. The second-order difference-frequency wave force and slowly-varying wind force may significantly affect the girder's lateral responses through resonance if the bridge's lateral bending stiffness is not sufficient. On the other hand, the first-order wave-frequency forces play a crucial role in the vertical responses.

• Advances in nano research
• /
• 제10권2호
• /
• pp.151-163
• /
• 2021

The main target of this study is to investigate nonlinear transient responses of moving polymer nano-size plates fortified by means of Graphene Platelets (GPLs) and resting on a Winkler-Pasternak foundation under a transverse pressure force and a temperature variation. Two graphene spreading forms dispersed through the plate thickness are studied, and the Halpin-Tsai micro-mechanics model is used to obtain the effective Young's modulus. Furthermore, the rule of mixture is employed to calculate the effective mass density and Poisson's ratio. In accordance with the first order shear deformation and von Karman theory for nonlinear systems, the kinematic equations are derived, and then nonlocal strain gradient scheme is used to reflect the effects of nonlocal and strain gradient parameters on small-size objects. Afterwards, a combined approach, kinetic dynamic relaxation method accompanied by Newmark technique, is hired for solving the time-varying equation sets, and Fortran program is developed to generate the numerical results. The accuracy of the current model is verified by comparative studies with available results in the literature. Finally, a parametric study is carried out to explore the effects of GPL's weight fractions and dispersion patterns, edge conditions, softening and hardening factors, the temperature change, the velocity of moving nanoplate and elastic foundation stiffness on the dynamic response of the structure. The result illustrates that the effects of nonlocality and strain gradient parameters are more remarkable in the higher magnitudes of the nanoplate speed.

• International Journal of Contents
• /
• 제16권4호
• /
• pp.16-25
• /
• 2020

The size of observation data in astronomy has been increasing exponentially with the advents of wide-field optical telescopes. This means the needs of changes to the way used for large-scale astronomy data analysis. The complexity of analysis tools and the lack of extensibility of computing environments, however, lead to the difficulty and inefficiency of dealing with the huge observation data. To address this problem, this paper proposes a workflow execution system for analyzing large-scale astronomy data efficiently. The proposed system is composed of two parts: 1) a workflow execution manager and its RESTful endpoints that can automate and control data analysis tasks based on workflow templates and 2) an elastic resource manager as an underlying mechanism that can dynamically add/remove virtualized computing resources (i.e., virtual machines) according to the analysis requests. To realize our workflow execution system, we implement it on a testbed using OpenStack IaaS (Infrastructure as a Service) toolkit and HTCondor workload manager. We also exhaustively perform a broad range of experiments with different resource allocation patterns, system loads, etc. to show the effectiveness of the proposed system. The results show that the resource allocation mechanism works properly according to the number of queued and running tasks, resulting in improving resource utilization, and the workflow execution manager can handle more than 1,000 concurrent requests within a second with reasonable average response times. We finally describe a case study of data reduction system as an example application of our workflow execution system.

• Advances in nano research
• /
• 제10권3호
• /
• pp.253-261
• /
• 2021

Polydimethylsiloxane (PDMS) is one of the most widely adopted silicon-based organic polymeric elastomers. Elastomeric nanostructures are normally required to accomplish an explicit mechanical role and correspondingly their mechanical properties are crucial to affect device and material performance. Despite its wide application, the mechanical properties of PDMS are yet fully understood. In particular, the time dependent mechanical response of PDMS has not been fully elucidated. Here, utilizing state-of-the-art PeakForce Quantitative Nanomechanical Mapping (PFQNM) together with Force Volume (FV) and Fast Force Volume (FFV), the elastic moduli of PDMS samples were assessed in a time-dependent fashion. Specifically, the acquisition frequency was discretely changed four orders of magnitude from 0.1 Hz up to 2 kHz. Careful calibrations were done. Force data were fitted with a linearized DMT contact mechanics model considering surface adhesion force. Increased Young's modulus was discovered with increasing acquisition frequency. It was measured 878 ± 274 kPa at 0.1 Hz and increased to 4586 ± 758 kPa at 2 kHz. The robust local probing of mechanical measurement as well as unprecedented high-resolution topography imaging open new avenues for quantitative nanomechanical mapping of soft polymers, and can be extended to soft biological systems.

• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.25-38
• /
• 2022

The RC private constructions represent a large part of the housing stock in the north part of Algeria. For various reasons, they are mostly built without any seismic considerations and their seismic vulnerability remains unknown for different levels of seismic intensity possible in the region. To support future seismic risk mitigation efforts in northern Algeria, this document assesses the seismic vulnerability of typical private RC constructions built after the Boumerdes earthquake (May 21, 2003) without considering existing seismic regulation, through the development of analytical fragility curves. The fragility curves are developed for four representative RC frames in terms of slight, moderate, extensive, and complete damage states suggested in HAZUS-MH 2.1, using nonlinear time history analyses. The numerical simulation of the nonlinear seismic response of the structures is performed using the SeismoStruct software. An original intensity measure (IM) is proposed and used in this study. It is the zone acceleration coefficient "A", through which the seismic hazard level is represented in the Algerian Seismic Regulations. The efficiency, practicality, and proficiency of the choice of IM are demonstrated. Incremental dynamic analyses are conducted under fifteen ground motion accelerograms compatible with the elastic target spectrum of the Algerian Seismic Regulations. In order to cover all the seismic zones of northern Algeria, the accelerograms are scaled from 0.1 to 2.5 in increments of 0.1. The results mainly indicate that private constructions built after the Boumerdes earthquake in the moderate and high seismic zones with four (04) or more storeys are highly vulnerable.

• 한국지반공학회논문집
• /
• 제24권4호
• /
• pp.67-78
• /
• 2008

본 연구에서는 시멘트의 고결효과를 정량적으로 파악하기 위하여 낙동강하상모래와 소량의 포틀랜드시멘트를 혼합하여 고결된 모래에 대하여 일축압축시험 및 배수조건과 비배수 조건의 삼축압축시험을 수행하였다. 시멘트혼합율의 증가에 따라 첨두강도 및 탄성계수는 증가하였고 시멘트의 결합력에 의하여 다일레이션 및 과잉간극수압이 억제되었으나 시멘트 결합력의 파괴 후 증가된 모래입자크기에 의하여 증가하였다. 그리고 배수조건의 응력-변형률 곡선은 연화거동이 나타났지만 비배수조건에서는 증가된 부(-)의 과잉간극수압에 의한 유효응력의 증가로 경화거동을 나타냈다. 각 조건에 대한 강도증가량의 예측을 위하여 선형을 가정한 다중회귀분석을 실시한 결과 제시된 경험식의 결정계수는 $0.81{\sim}0.91$로 나타나 신뢰성이 높은 것으로 평가되었으며 건조밀도의 경우 고결된 모래의 입도조건을 동시에 고려할 수 있어 고결된 모래의 강도를 결정하는데 중요한 변수로 분석되었다.

• 대한토목학회논문집
• /
• 제43권4호
• /
• pp.413-420
• /
• 2023

지진피해 감소를 위한 내진 구조 중에서 제진 구조는 댐퍼의 간단한 적용으로 효율적으로 내진 성능을 향상시키고 경제성을 확보할 수 있는 기술이다. 그러나 기존의 댐퍼는 요구 내진 성능과 재료 소성으로 인한 내구성에 대하여 한계를 나타낸다. 따라서 본 연구에서는 기본적으로 탄성 특성을 나타내는 폴리우레탄에 선행 압축을 가하고 초탄성 형상기억합금을 적용하여 복원 특성을 증진시킨 폴리우레탄 댐퍼를 제안하였다. 폴리우레탄 댐퍼의 특성을 검증하기 위하여 우선 개념을 정립하고 초탄성 형상기억합금과 강재 적용, 선행압축 크기를 설계 변수로 선정하여 설계 상세를 완성하였다. 또한, 구조 실험을 수행하여 응답 거동을 도출하여 하중 저항 성능, 잔류 변위, 회복률, 에너지 소산 능력을 분석하였다. 분석한 결과 폴리우레탄 댐퍼는 초탄성 형상기억합금 와이어를 적용하고 선행 압축이 증가하면 다양한 성능이 향상되는 결과를 나타냈다.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.433-443
• /
• 2023

The current paper discusses the dynamic and stability responses of cross-ply composite laminated plates by employing a refined quasi-3D trigonometric shear deformation theory. The proposed theory takes into consideration shear deformation and thickness stretching by a trigonometric variation of in-plane and transverse displacements through the plate thickness and assures the vanished shear stresses conditions on the upper and lower surfaces of the plate. The strong point of the new formulation is that the displacements field contains only 4 unknowns, which is less than the other shear deformation theories. In addition, the present model considers the thickness extension effects (ε_z≠0). The presence of the Winkler-Pasternak elastic base is included in the mathematical formulation. The Hamilton's principle is utilized in order to derive the four differentials' equations of motion, which are solved via Navier's technique of simply supported structures. The accuracy of the present 3-D theory is demonstrated by comparing fundamental frequencies and critical buckling loads numerical results with those provided using other models available in the open literature.

• 대한토목학회논문집
• /
• 제28권1D호
• /
• pp.45-55
• /
• 2008

아스팔트 혼합물의 거동을 정확하게 예측하기 위하여 점탄소성 연속체 손상모형(이하 점탄소성 모형)을 개발하였다. 본 논문에서는 인장조건에서 점탄소성 모형의 개발과 4가지 혼합물(일반 밀입도, SBS, CR-TB, Terpolymer)을 이용한 모형의 검증과정을 다루고 있다. 모형 개발을 위해서 실내시험으로 측정한 아스팔트 혼합물의 전체 응답을 점탄성과 점소성 성분으로 구분하여 분석하였다. 점탄성 연속체 손상모형으로는 미세균열이 지배적인 상태에서 아스팔트 혼합물의 시간 의존적 거동을 해석하고, 고온 혹은 저속 하중 조건에서 발생한 영구변형(시간 종속과 비종속 성분을 모두 포함)은 점소성 모형으로 해석하였다. 변형률 분해 원리에 근거하여 각각의 모형을 통합하여 점탄소성 연속체 손상모형(VEPCD)을 개발하였다. 모형의 변수 결정을 위해서 직접인장시험을 수행하고 각각의 혼합물에 대한 선형 점탄성은 동탄성계수와 시간-온도 전이계수 그리고 위상각의 주곡선으로 정의하였다. 개발된 점탄소성 모형의 예측 성능을 평가하기 위하여 두 종류의 실내시험 실시하고 그 결과를 분석하였다 : 1) 단일 변형률 인장 시험, 2) 임의 하중조건을 모사한 피로 시험.