• 한국전산구조공학회논문집
• /
• 제21권4호
• /
• pp.335-345
• /
• 2008

본 연구에서는 역학적 특성이 우수하여 다양한 구조에 적용되고 있는 복합적층판에 대한 추계론적 유한요소해석 정식화를 제안한다. 정식화의 제시는 추계론적 수치해석기법 중 그 정확도가 매우 높은 것으로 알려져 있는 가중적분법에 기초하였다. 공간적 불확실성을 가지는 인수로는 두 재료축에 대한 탄성계수와 면내 전단탄성계수가 고려되었다. 이들 재료인수들은 독립적인 추계장함수로 모델링 되었으며, 이들 추계장이 구조거동에 미치는 영향은 지수함수형태의 자기 및 상호상관함수를 적용하여 산정하였다. 수치예제를 통하여 복합적층판이 등방성 및 이방성의 재료에 의한 판 구조에 비하여 거동의 변동계수가 낮음을 보여주었으며, 제안된 해석법의 검증을 위하여 몬테카를로 해석을 동시에 수행하고 그 결과를 상호 비교하였다.

• 한국공간구조학회논문집
• /
• 제6권4호
• /
• pp.53-61
• /
• 2006

본 연구에서는 임의의 반복하중 작용시 강구조물에 발생하는 대변형 및 반복소성거동을 정확히 예측하기 위하여 유한변위이론과 반복소성이력모델을 적용한 3차원 탄소성 유한요소 해석기법을 개발하였다. 반복소성이력모델은 강재의 단조재하실험 및 반복하중실험 결과에 기초하여 정식화되었다. 개발된 해석기법의 정도는 Bilinear모델 및 미소변위이론을 적용한 해석기법 및 실험결과와 비교하여 검증하였다. 본 연구에서 개발한 유한변위이론과 반복소성이력모델을 적용한 3차원 유한요소 해석기법이 임의의 반복하중을 받는 원형강교각의 대변형 및 반복소성거동을 정확히 예측할 수 있음을 알 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.452-465
• /
• 2015

This paper presents the simplified welding distortion analysis method to predict the welding deformation of both plate and stiffener in fillet welds. Currently, the methods based on equivalent thermal strain like Strain as Direct Boundary (SDB) has been widely used due to effective prediction of welding deformation. Regarding the fillet welding, however, those methods cannot represent deformation of both members at once since the temperature degree of freedom is shared at the intersection nodes in both members. In this paper, we propose new approach to simulate deformation of both members. The method can simulate fillet weld deformations by employing composite shell element and using different thermal expansion coefficients according to thickness direction with fixed temperature at intersection nodes. For verification purpose, we compare of result from experiments, 3D thermo elastic plastic analysis, SDB method and proposed method. Compared of experiments results, the proposed method can effectively predict welding deformation for fillet welds.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1125-1132
• /
• 2009

The theory and a probe of the pilot hole wall deformation method, which is a 3-dimensional stress measurement method based on the stress relief principle, were developed. A pilot hole is drilled from the bottom of a borehole and the stress measurement probe is inserted into the pilot hole. The borehole is advanced as the overcoring and the changes in the radius of the pilot hole in three directions and in the axial lengths between the borehole bottom and the pilot hole wall along four axial lines are measured by cantilever type-displacement sensors. The differences between the displacements by the elastic stress analysis and those measured by using the probe were within 3% in the uniaxial compression test of an acrylic resin plate having a hole.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.38-45
• /
• 2004

A practical method for evaluating the possibility of the occurrence of cracking in actual thick-plate T-joint weldments is presented in this study. Systematic experitrients based on the method of the design of experiment are conducted in order to investigate the crack tendency in relation to typical welding parameters such as diffusible hydrogen, restraint intensity, preheating temperature and so on. The elastic analysis using the fmite element techniques is employed to quantify the restraint intensities of the specimens. The defined restraint intensities are treated in numerical way for the sake of considering the most uncertain factor among some major factors that govern the cracking phenomena due to welding. The critical plane for judgment of the crack occurrence or crack density is presented as a function of typical welding parameters including determined restraint intensities. The results of numerical estimation by the proposed method for the experimental specimens show the usefulness as a practical tool in welding induced crack problem having extensive uncertainties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.373-378
• /
• 2000

Zinc galvanized steel plates(sections) of annular corrugations have been used in buried steel culverts. These structures are referred to by a variety of names such as flexible pipes, buried pipes, soil-steel bridges, corrugated steel culverts, and etc. Buried corrugated steel structures show flexible behaviour under the soil load. compared with concrete box structures. Finite element analysis was performed to suggest the reasonable connecting method between the flexible steel culverts and the rigid concrete box. It was predicted that perfectly constrained connections could induce the excessive stress in steel plates. Therefore elastic bearing connections that allow vertical displacement at the connecting point were applied.

• Steel and Composite Structures
• /
• 제11권2호
• /
• pp.115-130
• /
• 2011

Considering the randomness of material parameters in the laminated composite plate, a scheme of stochastic finite element method to analyze the displacement response variability is suggested. In the formulation we adopted the concept of the weighted integral where the random variable is defined as integration of stochastic field function multiplied by a deterministic function over a finite element. In general the elastic modulus of composite materials has distinct value along an individual axis. Accordingly, we need to assume 5 material parameters as random. The correlations between these random parameters are modeled by means of correlation functions, and the degree of correlation is defined in terms of correlation coefficients. For the verification of the proposed scheme, we employ an independent analysis of Monte Carlo simulation with which statistical results can be obtained. Comparison is made between the proposed scheme and Monte Carlo simulation.

• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.25-32
• /
• 1989

철근콘크리트 쉘의 재료비선형 파괴해석을 위한 프로그램을 개발하여 탄성 및 비탄성 범위에서의 하중-변형 응답과 균열전파를 추적하였다. 면내력과 면외력 사이의 상호작용효과를 고려한 충분할 등매개변수 평판요소를 사용하였으며 전단변형을 고려하기 위하여 Mindlin판 이론을 이용하였다. 해석프로그램의 정당성은 철근콘크리트 쉘 시험체를 해석하고 그 결과와 실험결과를 비교하므로써 확인하였다.

• Structural Engineering and Mechanics
• /
• 제52권4호
• /
• pp.829-841
• /
• 2014

The main purpose of this study is to determine the effect of overlay on the crack propagation. In order to simplify the problem, a cement concrete pavement is modeled as an elastic plate on Winkler foundation. To derive the singular integral equations, the Fourier transform and dislocation density function are used. Lobatto-Chebyshev integration formula, as a numerical method, is used to solve the singular integral equations. The numerical solution of stress intensity factor at the crack tip is derived. In order to examine the effect of overlay for resisting crack propagation, numerical analyses are carried out for a cement concrete pavement with an embedded crack and a concrete pavement with an asphalt overlay. Results show the significant factors that influence the crack propagation.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.577-588
• /
• 2020

A unified solution is presented for the buckling analysis of rectangular laminated composite plates with elastically restrained edges. The plate is subjected to biaxial in-plane compression, and the boundary conditions are simulated by employing uniform distribution of linear and rotational springs at all edges. The critical values of buckling loads and corresponding modes are calculated based on classical lamination theory and using the Ritz method. The deflection function is defined based on simple polynomials without any auxiliary function. The verifications of the current study are carried out with available combinations of classic boundary conditions in the literature. Through parametric study with a wide range of spring factors with some classical as well as some not classical boundary conditions, competency of the present model of boundary conditions is proved.