• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.113-120
• /
• 1994

Large Concrete Panel Structures behave quite differently from frame or monolithic shear wall structures because of the weakness of Joint in stiffness and strength. The joint experiences large deformation such as shear-slip in vertical and horizontal joint and rocking and crushing in horizontal joint because of localized stress concentration, but the wall panels behave elastically under cyclic loads. In order to describe the nonlinear behavior of the joint in the analysis of PC structures, different analysis technique from that of RC structures is needed. In this paper, for analysis of large concrete panel subassemblage subjected to cyclic loads, the wall panels are idealized by elastic finite elements, and the joints by nonlinear spring elements with various load-deflection relationship. The analytical results are compared with the experimental results on the strength, stiffness, energy dissipation and lateral drift, and the effectiveness of this computer analysis modelling technique is checked.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.46-52
• /
• 2003

In ship structures, many parts are in contact with inner or outer fluid as stern, ballast and oil tanks. Fatigue damages can be sometimes observed in these tanks which seem to be caused by resonance. Tank structures in ships are in contact with water and the vibration characteristics are strongly affected by the added mass of containing water. Therefore it is important to predict vibration characteristics of tank structures. In order to estimate the vibration characteristics, the fluid-structure interaction problem has to be solved precisely. In the present paper, we have developed a numerical tool of vibration analysis of 3-dimensional tank structures using finite elements for plates and boundary elements for water region. To verify the present analysis, we have made an experiment for vibration characteristics of a tank with elastic opposite panels. And the added mass effect of containing water and the effect of structural constraint between panels are investigated numerically and discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.946-949
• /
• 2006

This study is a trial to make a design chart of sound insulation for multiple panel. Dilatational frequency, ${\Large f}_d$ becomes a key factor for optimal design since it acts like a turning point in sound insulation performance of such panels. Hence, in tuning the ${\Large f}_d$ optimally, elastic modulus of core material and thickness of the skin panel is designated to parameters. Based on these parameter, a design chart of sound insulation for multiple panel is made. Its applicability is proved by the case study of High noise reduction panel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.634-642
• /
• 1998

This paper deals with the analytical model of an elastic porous material in sound transmission loss of a double panel with fiber glasses. From the parametric analysis, it is concluded that the boundary condition, which is concerned to the contact between the skin panel and core materials, does not have much influence on sound transmission loss of a double panel with fiber glasses, and material properties of the porous material become, however, important factors to mass-spring-mass resonance. The comparisons of the prediction with the measurement of sound transmission loss of walls show good agreement between the two values.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.955-960
• /
• 2004

In this study, three dimensional FE analysis of concrete slab track has been performed in order to develop the realistic design of precast concrete slab track. The precast slab track system including the precast concrete slab panel and the grout layer is modeled using the three dimensional solid element with crack softening effect. The input load is computed from the one dimensional beam element model constituting the rail and several discrete springs. To investigate the effect of the longitudinal connection of slab panels, two different systems-continuous and discrete systems - are modeled. The analytical results show that the stresses of both the slab panel and the grout layer are in the range of linear elastic, and, at the interface between two adjacent panels, the primary stresses of the grout layer of the discrete system are higher than those of the continuous system. However, The overall stress levels of the grout layer are very low relative to the strength of th grout.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.671-684
• /
• 2017

Elastic-plastic shear buckling behaviors of the web-post in a Castellated Steel Beam (CSB) with hexagonal web openings under vertical shear force were investigated further using Finite Element Model (FEM) based on a sub-model, which took the upper part of the web-post under horizontal shear force to represent the whole web-post under vertical shear force. A simplified design method for the web-post elastic-plastic shear buckling strength was proposed based on simulation results of the sub-model. Proper boundary conditions were applied to the sub-model to assure that its behaviors were identical to those of the whole web-post. The equation to calculate the thin plate elastic shear buckling strength was adopted as the basic form to build the design equation for elastic-plastic buckling strength of the sub-model. Parameters that might affect the elastic-plastic shear buckling strength of the whole web-post were studied. After obtaining the vertical shear buckling strength of a sub-model through FEM, the shear buckling coefficient k can be obtained through the back analysis. A practical calculation method for k was proposed through curving fitting the parameter study results. The elastic-plastic shear buckling strength of the web-post calculated using the proposed shear buckling coefficient k agreed well with that obtained from the FEM and test results. And it was more precise than those obtained from EC3 based on the strut model.

• 한국강구조학회 논문집
• /
• 제25권5호
• /
• pp.519-530
• /
• 2013

본 연구에서는 스터드패널과 경량철골골조로 구성된 모듈러건물 유닛의 강성, 하중재하능력, 연성능력, 에너지소산능력 등 내진성능을 평가하기 위하여 주기실험을 수행하였다. 모듈러건물 유닛의 횡력저항요소로서 스트랩브레이스 및 시트강판으로 보강된 스터드패널을 사용하였다. 실험 결과, 스트랩브레이스 및 시트강판 보강 스터드패널을 사용한 모듈러건물유닛은 우수한 연성거동을 보였다. 최대변위비는 5.37% 이상을 보였고, 변위연성도는 5.76 이상인 것으로 나타났다. 그러나 주기거동 동안 핀칭이 크게 발생하여 주기당 에너지소산량은 좋지 않은 것으로 나타났다. 모듈러건물유닛의 소성메커니즘을 바탕으로 내진설계를 위한 강도, 항복변위, 탄성강성 등 설계식을 제안하였고 실험 결과와 비교를 통하여 제안된 설계식을 검증하였다. 제안된 방법은 모듈러건물유닛의 하중재하능력, 강성 등 내진성능을 합리적으로 예측하였다. 그러나 스트랩브레이스 보강 스터드패널의 탄성강성은 크게 과대평가되었으므로, 안전한 내진설계를 위해서는 구조해석 시 탄성강성을 50%로 줄이는 것이 필요하다.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.1-28
• /
• 2015

In this paper, the dynamic response of functionally gradient steel (FGS) composite cylindrical panels in steady-state thermal environments subjected to impulsive loads is investigated for the first time. FGSs composed of graded ferritic and austenitic regions together with bainite and martensite intermediate layers are analyzed. Thermo-mechanical material properties of FGS composites are predicted according to the microhardness profile of FGS composites and approximated with appropriate functions. Based on the three-dimensional theory of thermo-elasticity, the governing equations of motionare derived in spatial and time domains. These equations are solved using the hybrid Fourier series expansion-Galerkin finite element method-Newmark approach for simply supported boundary conditions. The present solution is then applied to the thermo-elastic dynamic analysis of cylindrical panels with three different arrangements of material compositions of FGSs including ${\alpha}{\beta}{\gamma}M{\gamma}$, ${\alpha}{\beta}{\gamma}{\beta}{\alpha}$ and ${\gamma}{\beta}{\alpha}{\beta}{\gamma}$ composites. Benchmark results on the displacement and stress time-histories of FGS cylindrical panels in thermal environments under various pulse loads are presented and discussed in detail. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state of the art of this problem, and provide pertinent results that are instrumental in the design of FGS structures under time-dependent mechanical loadings.

• 복합신소재구조학회 논문집
• /
• 제2권4호
• /
• pp.35-43
• /
• 2011

본 연구는 등분포 하중에 종속된 폼내장 콘크리트 샌드위치 패널 (foam insulated concrete sandwich panel)의 구조거동특성을 파악하였다. 유한요소모델이 콘크리트, 폼 그리고 철근의 비선형거동과 연결부재 (connector)의 상세 전단저항거동을 모사하기위해 사용되었다. 개발된 모델은 미주리대학 (University of Missouri)에서 수행된 정적실험자료를 사용하여 검증되었다. 합성 및 비합성 거동이 샌드위치패널의 구조거동에 미치는 영향을 정확히 모사하기 위해 전단연결재의 저항력을 모델에 정확히 반영하는 것이 중요하다. 본 연구에서 개발된 모델은 구조물의 극한강도 및 좌굴이후의 거동까지 모사하였고 미국콘크리트 학회 (ACI)의 설계예제와 비교하였다. 본연구의 결과는 정적 및 동적하중에 종속된 폼내장 콘크리트 샌드위치 패널의 해석및 설계에 유용한 정보를 제공할 것이다.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.727-734
• /
• 2006

강곡선복부판의 전단설계에서 Guide Specifications(AASHTO, 2003)에서는 여전히 후좌굴강도를 반영하고 있지 않다. 그러나 최근 강곡선 복부판의 전단거동에 관한 해석 및 실험연구를 통해서 탄성좌굴 후에 직선교 복부판과 같이 후좌굴강도를 발현하고 있으며, 일반적인 설계범위에서 직선교 복부판과 유사한 크기의 극한전단강도를 나타내고 있는 것으로 조사되었다. 본 연구에서는 강곡선복부판의 극한전단강도를 조사하기 위하여 유한요소해석과 실험연구를 수행하였다. 연구결과를 통해서 일반적으로 설계가 수행되는 기하학적인 범위 내에서 강곡선복부판은 후좌굴강도를 발현하며, 그 크기는 동일한 재료를 적용한 직선복부판과 유사하다는 것을 알 수 있었다. 그러므로 강도한계상태에서 강곡선복부판도 Lee and Yoo(1998)가 제안한 직선복부판의 극한전단강도를 이용하여 설계할 수 있음을 본 연구를 통해서 제안하였다.