• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.159-168
• /
• 2005

Noise generated by the blunt trailing edge of lifting surfaces is investigated in this study using fluid structure interaction theory. First, through the eddy modeling, noise generation doe to the flow instability on the rigid trailing edge is surveyed. Then the behavior of elastic cantileverd beam is investigated. Parametric study based on various material properties is employed to analyze the motion of the beam. Moreover, each eigenmode approach of cantilevered beam is used to find when flow induced vibration is resonant. To analyze elastic behavior of cantilever beam efficiently, moving grid generation technique based on non-conservative form of Navier-Stokes equation is used. Equation of the motion associated with the cantilever beam is discretized by the Galerkin procedure with forced vibration. As a consequence, behavior of the elastic cantilevered beam is stable when the first mode natural frequency of the material is relatively higher than that of flow induced pressure fluctuation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.697-702
• /
• 2011

Responses of multi degree of freedom systems under random excitations can be estimated by using Monte Carlo simulation. The equations of motion of an elastic pendulum system include nonlinear terms and show irregular characteristics under random excitation. While the magnitude of random excitation is small the response of an elastic pendulum shows borderlines. As the magnitudes of excitation increase, the responses show divergence with very large amplitudes of motion and the tendency is diverse dependent on the magnitude and type of random excitations and the ratio of natural frequencies.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.103-107
• /
• 2001

When ship claps against the ocean structure sited at shallow water, the time simulation of motion responses of dolphin-moored ocean structure is presented. The equatien of motion based on Cummin's theory of impulse responses are employed, and solved in time domain by using the Newmark $\beta$ method. The added mass and damping coefficients involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The impact forces due to ship collision are modeled as two method, and those are elastic and non-elastic collisions. The mooring forces for dolphin systems of scean structure are considered as linear spring system.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.99-109
• /
• 1987

Mechanisms with fully elastic members must consider both inertial forces due to the rigid motion of mechanisms and due to the elastic vibration of links. The main objectives of the kineto-elasto static and dynamic analyses are to calculate the quasi-static and the time-domain responses, respectively. An iterative transfer matrix method is used for a four-bar, fully elastic linked mechanism. Houbolt direct integration scheme is incorporated for the inertial effects due to the elastic link vibration. The analytical results are compared with the experimental responses and both responses show in good agreement.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1354-1359
• /
• 2004

This paper is concerned with the application of perturbation method to the dynamic analysis of floating flexible body. In dealing with the dynamics of free-floating body, the rigid-body motions and elastic vibrations are analyzed separately. However, the rigid-body motions cause vibrations and elastic vibrations also affect rigid-body motions in turn, which indicates that the rigid-body motions and elastic vibrations are coupled in nature. The resulting equations of motion are hybrid and nonlinear. We can discretize the equations of motion by means of admissible functions but still we have to cope with nonlinear equations. In the previous paper, we proposed the use of perturbation method to the coupled equations of motion and derived zero-order and first-order equations of motion. The derivation process was lengthy and tedious. Hence, in this paper, we propose a new approach to the same problem by applying the perturbation method to the Lagrange's equations, thus providing a systematic approach to the addressed problem. Theoretical derivations show the efficacy of the proposed method.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.5-11
• /
• 2011

In this paper, the dynamic response analysis of a floating crane with elastic booms and a cargo is performed. The objective is to consider the effects of the elastic boom in the lifting design stage. Governing equations of the motion for the system which consists of interconnected rigid and flexible bodies are derived based on the formulation of flexible multibody system dynamics. To model the boom as a flexible body, floating reference frame and nodal coordinates are used. Coupled surge, pitch, and heave motion of the floating crane with the cargo which has 3 degree of freedom is simulated by solving the equation numerically. Finally, the effects of the elastic boom for the lifting design that the floating crane is required to lift a heavy cargo are discussed by comparing the simulation result between with the elastic boom and with the rigid one.

• Journal of muscle and joint health
• /
• v.12 no.2
• /
• pp.97-108
• /
• 2005

Purpose: The purpose of this study was to identify the effects of Self-help group program including Elastic band exercise on ADL and ROM of hemophilia patient. Method: A quasi -experimental design was used. The subjects were 40 young adults with hemophilia (21 experimental group, 19 control group). The subjects of experimental group were participated self-help group program in which five sessions for 5 weeks. The program consisted of health education on hemophilia, elastic band exercise, and therapeutic recreation and its outcomes have been evaluated on ADL and ROM of extremities. The obtained data were analyzed by using the Mann-Whitney U test and ANCOVA of SPSS. Result: 1) The score of ADL increased significantly in the experimental group as compared to the control group. 2) The degree of range of motion of extremities improved in the experimental group as compared to the control group. Conclusion: Considering these research results, the program including elastic band exercise was effective in improving self-management ability and range of motion of extremities. Therefore this program including elastic band exercise could be implemented it as self-management for the hemophilia clients.

• Structural Engineering and Mechanics
• /
• v.78 no.5
• /
• pp.557-572
• /
• 2021

The current study considers free vibration of the spherical panel with magnetorheological (MR) fluids core and magneto-electro-elastic face sheets. The panel is subjected to electro-magnetic loads and also is located on an orthotropic visco-Pasternak elastic foundation. To describe the displacement components of the structure, the first-order shear deformation theory (FSDT) is used and the motion equations are extracted by employing Hamilton's principle. To solve the motion differential equations, Navier's method is selected as an exact analytical solution for simply supported boundary conditions. Effect of the most important parameters such as magnetic field intensity, loss factor, multi-physical loads, types of an elastic medium, geometrical properties of the panel, and also different material types for the face sheets on the results is considered and discussed in details. The outcomes of the present work may be used to design more efficient smart structures such as sensors and actuators.

• Structural Engineering and Mechanics
• /
• v.31 no.4
• /
• pp.453-475
• /
• 2009

The literature regarding the free vibration analysis of Bernoulli-Euler and Timoshenko beams on elastic soil is plenty, but the free vibration analysis of Reddy-Bickford beams on elastic soil with/without axial force effect using the Differential Transform Method (DTM) has not been investigated by any of the studies in open literature so far. In this study, the free vibration analysis of axially loaded Reddy-Bickford beam on elastic soil is carried out by using DTM. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments in this study. The governing differential equations of motion of the rectangular beam in free vibration are derived using Hamilton's principle and considering rotatory inertia. Parameters for the relative stiffness, stiffness ratio and nondimensionalized multiplication factor for the axial compressive force are incorporated into the equations of motion in order to investigate their effects on the natural frequencies. At first, the terms are found directly from the analytical solutions of the differential equations that describe the deformations of the cross-section according to the high-order theory. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the governing differential equations of the motion. The calculated natural frequencies of one end fixed and the other end simply supported Reddy-Bickford beam on elastic soil using DTM are tabulated in several tables and figures and are compared with the results of the analytical solution where a very good agreement is observed and the mode shapes are presented in graphs.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.42-46
• /
• 2005

Ground motions with the near fault effects are studied for the seismic design and the analysis of structures. The characteristics of the velocity pulse by the forward directivity are studied and the relations between velocity pulse and earthquake magnitude are investigated. The elastic response spectra of the near fault ground motion are compared with these of the far fault ground motion. And effects on the behaviors of structures are studied by the analysis of the elastic and the inelastic single degree of freedom system in terms of the response spectrum and the ductility demand.