• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.25-30
• /
• 2006

This study is about an optimum design to improve the kinematic and compliance characteristics of a torsion-beam suspension system. The kinematic and compliance characteristics of an initial design of the suspension was obtained through a roll-mode analysis. The objective function was set to minimize within design constraints. The coordinates of the connecting point between the torsion-beam and the trailing arm were treated as design parameters. Since the torsion-beam suspension has large nonlinear effects due to kinematic and elastic motion, Genetic Algorithms were employed for the optimal design. The optimized results were verified through a double-lane change simulation using the full vehicle model.

• 대한한방내과학회지
• /
• 제35권1호
• /
• pp.1-11
• /
• 2014

Objectives : To investigate the effects of Sa-am acupuncture on muscle architecture and elastic properties of the spastic elbow flexor and to evaluate the correlation between clinical findings and parameters of real-time sonoelastography (RTS) in patients with chronic post-stroke hemiparesis. Materials and Methods : Seven patients (five males, two females) with chronic post-stroke hemiparesis were included. Sa-am acupuncture of Ganseunggyeok (肝勝格: LU8 LR4 補, HT8 LR2 瀉) was applied to the unaffected side 3 times a week for 4 weeks. During each acupuncture treatment period, patients were requested to exercise their affected arm, and spasticity and functional recovery outcomes of the affected arm were evaluated before and after Sa-am acupuncture treatment. Clinical outcomes were assessed using motricity index (MI), modified Ashworth scale (MAS), Fugl-Meyer assessment scale (FMA) and modified Barthel index (MBI) for elbow flexor spasticity. RTS images indicate the relative hardness of the examined muscles ranged from red (hard) to purple (soft) for color-scale, and from black (hard) to white (soft) for hue scale. Color and hue histograms of the biceps brachii and brachialis were analyzed using Image J software, and median red, blue, and hue pixel intensity were obtained. Results : MI and FMA score significantly increased and MAS score significantly decreased (p<0.05). F-wave maximal amplitude of affected abductor pollicis brevis significantly decreased (p<0.05). Muscle thickness of affected brachialis significantly increased (p<0.05). Red and green pixel intensity of affected brachialis significantly decreased (p<0.05). Conclusions : Our study revealed that Sa-am acupuncture is effective as a useful and safe treatment for spasticity in chronic post-stroke hemiparesis.

• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.881-894
• /
• 2015

The silver generation have clothing style of optimal daily life comparing than young generation because they do not participate a specific sport event but daily- life exercise. As the human body ages, the figure of the silver generation shows different body shape because upper body changes to curved figure including the belly and waist part. Therefore, clothing characteristics for the silver generation should be considered with proper function, design and textiles to optimize body movement. This study investigated various exercise types according to motion analysis of the silver generation in order to develop the design of the active T-shirts reflecting the structural properties and providing the optimum exercise circumstance. The results to consider design needs are as followed; As the T-shirts design for the flexible exercise which required frequent movement of upper body such as bending and waist twisting during body stretching, a stretch fabric applied to the waist part considering T-shirts allowance and length to make extreme elongation and support for well-fitting appearance of the T-shirts. As the T-shirts design for the instantaneous reactionary exercise, high elastic four-way stretch fabric is applied to the part of arm hole to optimize skeletal and muscle movement for entire body and arm work. As the T-shirts design for the endurance exercise such as climbing, cycling, and walking, the shoulder line of the back part has cutting line allowance to make optimum movement of the upper body but no change of the waist part.

• Korean Journal of Acupuncture
• /
• 제24권2호
• /
• pp.61-76
• /
• 2007

Objectives : Accurate and reproducible location of an acupuncture point (AP) have been considered an essential component of meaningful acupuncture research as well as clinical practice. Several kinds of devices have been developed and widely used for the convenience of locating APs. However, the accuracy and convenience of these devices have not been systematically evaluated. The present study was performed to find out the most suitable tools for the location accuracy and location easiness of APs among the devices respectively. Methods : Twenty subjects attempted to locate APs, including PC5 and SP6 in the arm and leg, using four different AP positioning methods: one Conventional Ruler method and three alternative methods including Cunometer, Transparent AP meter, and Elastic Ruler method. The position marked on each AP was plotted onto a thin, flexible, and transparent plastic film, and the dispersion rate of the positions was determined and recorded. The elapsed time for locating each AP was measured. After that each subject was answered to a short questionnaire regarding the degree of convenience and confidence of use of each method for AP location. Results : All of three alternative methods took less time than Conventional Ruler method did. Among these alternative methods, the accuracy of Elastic Ruler method was markedly higher than others. The degree of convenience of the Cunometer and the confidence of Elastic Ruler method were the highest among these alternative methods. Conclusions : The present study indicates that the Elastic Ruler method was the most compatible for the conventional Ruler methods. However, there are many factors need to be reconsidered. Improved devices for locating AP are imperatively needed for clinical practice.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.646-656
• /
• 2015

This study investigates the conditions of Korean naval duty and combat uniforms to develop a new design. Survey participants consisted of, 723 Sailors ($25.3{\pm}6.9yr$ in age, $43{\pm}53$ months in work experience, $174{\pm}6cm$ in height, $71{\pm}9kg$ in body mass) serving in the Korean Navy for over 12 months. The questionnaire consisted of 72 questions about anthropometric characteristics, preferred design, textiles, wear mobility, and subjective perceptions. The results showed that the preferred colors for future naval duty uniforms were blue in summer (69%) and black in winter (62%). Digital camouflage pattern (60%) and darker colors on the inside of shirt collar (87%) and the edge of sleeves (84%) were preferred. They favored more than one pocket on the upper arm and chest of the shirts (58%), narrower width around pant legs and hems than the current clothing (63%), self-controlled elastic waist (55%) and no cargo type pocket on the pants (45%). There were requirements to alleviate excessive heat stress in summer and to protect from the cold and wind in winter. Wrinkle-free (85%), anti-bacterial (78%), water-proof (75%), oil-proof (90%), and elastic (67%) textiles were preferred for Korean navy uniforms. These results will be applied to develop the next generation Korean navy uniforms.

• 대한물리의학회지
• /
• 제13권3호
• /
• pp.75-80
• /
• 2018

PURPOSE: Scapular stability is very important to arm function during activities of daily living. The push-up plus exercise is commonly used to stabilize the shoulder muscles. In the present study, we designed an elastic shoulder band (ESB) that could be used with the push-up plus exercise and studied muscle activities of the serratus anterior (SA) and the lower and the upper trapezius (LT and UT) on stable and unstable support. METHODS: Fifteen healthy people participated in this study. Three muscles were investigated using surface EMG with and without the ESB on stable and unstable support. All subjects performed each trial three times for 7 seconds per set and rested for 30 seconds. Repeated one-way ANOVA was used for statistical analyses. RESULTS: The EMG activity of the SA was significantly different during the push-up plus exercise on stable support with the ESB compared with that on unstable support without the ESB (p<.05). However, there were no differences in the activities of UT and LT on stable and unstable support (p>.05). CONCLUSION: The ESB was effective for the activity of SA during the push-up plus exercise on stable support; therefore, it has the potential for use by people during push-up plus exercises. However, further studies are required to investigate the rehabilitation tools for patients with shoulder instability.

• 여성건강간호학회지
• /
• 제10권4호
• /
• pp.301-310
• /
• 2004

Purpose: The purpose of this study was to develop an exercise program for postmastectomy patients. Method: This study was conducted from October, 2003 to June, 2004. The exercise program was developed based on literature review and needs assessment using focus group interviews. The subjects for the focus group interview consisted of 11 patients, 13 recovering patients, and 20 nurses from 3 hospitals. Development of the program was proceeded with analysusm design and development steps. Result: The results of the needs assessment using the focus group interview showed that the exercise program was imperative for postmastectomy patients. Based on the results, a home video tape containing 3 steps, was developed. Each step includes warming-up, stretching, the main exercise, and cool-down. Steps 2 and 3 include exercises with an elastic band, and an elastic ball. The program was modified after conducting a pre-test. A self-checklist including shoulder mobility, hand strength, arm volume and subjective comments on how they feel will be used before and after the exercise program. Conclusion: The exercise program will improve breast cancer patients' quality of life and their physical well-being. Further studies are recommended to test the effectiveness of the exercise program.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.83-90
• /
• 2010

The windshield wiper consists of 4 parts: a blade, an arm, a linkage and a motor. The wiper blade makes contact with the windshield and is designed to be operated normally at an angle of 30~50 degrees to the front glass. If the contact pressure between the wiper blade and windshield surface is too high, noise and wear of the rubber will result. On the other hand, if the contact pressure is too low, the performance will do badly, since foreign substances such as dust and stains will not be removed well. The pressure and friction of the wiper blade has a great influence on its effectiveness in cleaning the front window. This is due to the contact of the rubber with the window. This paper presents the dynamic analysis method to estimate the performance of the flat type blade of the wiper system. The blade has a nonlinear characteristic since the rubber is an incompressible hyper-elastic and visco-elastic material. Thus, Structural dynamic analysis using a complex contact model for the blade is performed to find the characteristics of the blade. The flexible multi-body dynamic model is verified by the comparison between test and analysis result. Also, the optimization using the central composite design table is performed.

• 대한가정학회지
• /
• 제18권2호
• /
• pp.1-13
• /
• 1980

When we design a dress, we should not only consider the esthetic sense and the relationship between movements of the body and the type of dress, but also the combination between the qualities and proper uses of textiles. recently the sale of ready-made clothes has been booming but I wonder whether they have been made in accordance with research concerning body movements and dresses. I would like to make the following observations on dresses, because I have personally suffered the inconvenience of restricted arm movements when wearing ready-made clothes. I have made four types types of foundations with muslin and Jersey, with these foundations I measured the degree of tension or how much the waist-line was drawn up then the arm was moved in increments of 45 degree angles and there by covering the entire span of vertical and horizontal movements. I have intended to experiment with sleeves of differing height in several ways. Concerning the movement factor, I have determined that with excessive activity vertical movements are twice as uncomfortable as horizontal movements. Concerning the faburic, I have found that because jersey has more elastic qualities than muslin, it has proven to be more responsive to body movements. concerning dresses, I have fund that the higher the height of the sleeves, the more uncomfortable it is to move the arms and the greater the degree to which the waist-line is drawn up. As a result this experiment I have made the following observations. Firstly, the vertical movement of the arms to a 180 degree angle has the most extreme influence on the breadth of movement of the waist-line. Secondly, because jersey permits freer body movements than muslin, it should be the preferred material for use in making sportswear. Thirdly, the formula A·H/4+3 of the sleev's cap height is suitable for making street dresses and formal wear. The formula A·H/5 and A·H/6 are properly used when making working clothes and sportswear, and the formula A·H/8 is proper for a sleeping garment and clothes for patients. Fourthly when deciding to any garments, it is important to consider the amount of arm movement anticipated and the relationship between the material and the degree to which the waistline is drawn up. In nder-blouse, when we raise our arms to the most extreme position, we should at that point still have 20∼25 cm of material remaining under the waist-line which includes the maximum of 14.1cm plus part of the blouse and breath of skirt's belt. In the case of the over blouse it is proper for us to have the length of 17∼20 cm remaining below the waist-line.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.120-129
• /
• 2002

An integrated structure and controller design approach for rotating cantilever beam is presented. An optimization method is developed for improving positioning performance considering the elastic deformations during high speed rotation and adopting the beam shape and the control gains as design variables. For this end, a dynamic model is setup by the finite element method according to the shape of the beam. The mass and stiffness of the beam are distributed in such a way that the closed-loop poles of the control system should be located leftmost in the complex s-plane. For optimization method, the simulated annealing method is employed which has higher probability to find the global minimum than the gradient-based down-hill methods. Sequential design and simultaneous design methods are proposed to obtain the optimal shape and controller. Simulations are performed with new designs by the two methods to verify the effectiveness of the approach and the results show that the settling time is improved for point-to-point position controls.