• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.143-157
• /
• 2002

This study was to analyze the kinematic variables when the subjects performing Uchi-mata(inner thigh reaping throw) by Kumi-kata types((How to grasp A or B?) and two different opponent's height in Judo. Kinematic variables were temporal, posture. Data analysis was collective comparison of two-way ANOVA, t-test by type A&B and two different opponent's height. There were significant difference of Kumi-kata types(p<.05) in the time elapsed on Kake phase(KP : throwing phase) and hip, knee, ankle-angle of the attacking foot in the 1st stage of KP and knee, ankle-angle of the attacking foot and hip, knee ankle-angle of the supporting foot in the 2nd stage of KP. There were significant difference of two opponent's(p<.05) in the time elapsed on KP and hip-angle of the supporting foot in 1st stage of KP. Therefore, the interaction effect(p<.05) were in the time elapsed on KP and hip-angle of the supporting foot in the 2nd stage of KP. So, It could be suggested that Judoka hold on the part-behind neck lapel(type A) at the sleeve with the other of Judogi jacked when opponent's height was short. Because the time elapsed on KP of type B was not so fast as type A(p<.05) during performed Uchi-mata, and also the bigger hip-angle of the supporting foot in the 2nd stage of KP grew, the faster the time elapsed on KP became.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.521-528
• /
• 2003

This paper presents the results of a cooperative research on remote parallel pseudo-dynamic testing on a base-isolated bridge with multiple piers using Internet between KAIST, Korea and Kyoto Univ., Japan. Experimental facilities located at two institutions were parallelly used to test the nonlinear behavior of the base-isolators. Two data communication schemes for parallel tests were developed and the performance is compared. The results indicate that the elapsed time may vary widely depending on the data communication and testing schemes : i.e. 1-25sec for each time step. But it is fairly comparable with the time required for pseudo-dynamic testing. The testing method can become more powerful, as the data communication and monitoring techniques through Internet improve further.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.346-348
• /
• 1997

This paper presents microprocessor-based real-time speed and position detection by inductive radio loop in new transportation system, such as magnetically levitated train system, rubber tyred train, and linear-motor car. The constant elapsed time method is used in this study for high accurate detection over a wide speed range. And for reliability and safety of the system, it is duplicated and data-bus level comparison is performed by fail-safe comparator.

• Industrial Engineering and Management Systems
• /
• v.11 no.4
• /
• pp.397-405
• /
• 2012

This research proposes a framework of buffer management for multi-project systems in the critical chain project management (CCPM) method, expressed in the form of max-plus linear (MPL) representation. Since time buffers are inserted in the projects for absorbing uncertainties in task durations and protecting the completion times, the proposed method provides a procedure for frequently surveying the rates of consumed buffers and the rate of elapsed times. Their relation expresses the performance of the projects which is plotted on a chart through the completed processes. The chart presents the current performance of the projects and their interaction, which alerts managers to make necessary decisions at the right time for managing each project and the entire multi-project system. The proposed framework can analyze the complex system readily, and it enables managers to make an effective decision on scheduling. The effectiveness of the framework is demonstrated through a numerical example.

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.409-414
• /
• 2000

A machine vision system was built to obtain single stationary image from an egg. This system includes a CCD camera, an image processing board and a lighting system. A computer program was written to acquire, enhance and get histogram from an image. To minimize the evaluation time, the artificial neural network with the histogram of the image was used for eggshell evaluation. Various artificial neural networks with different parameters were trained and tested. The best network(64-50-1 and 128-10-1) showed an accuracy of 87.5% in evaluating eggshell. The comparison test for the elapsed processing time per an egg spent by this method(image processing and artificial neural network) and by the processing time per an egg spent by this method(image processing and artificial neural network) and by the previous method(image processing only) revealed that it was reduced to about a half(5.5s from 10.6s) in case of cracked eggs and was reduced to about one-fifth(5.5s from 21.1s) in case of normal eggs. This indicates that a fast eggshell evaluation system can be developed by using machine vision and artificial neural network.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.122-128
• /
• 2016

The purpose of this study is to improve the firing elevation driving method for towed howitzer to prevent the musculoskeletal disorders. To adjust the firing elevation, it is required to rotate the hand wheel and this work has been done manually in the firing test range as the same method as field artillery troops. In the firing test range, the motor-driven firing elevation adjustment device was developed to improve the working efficiency and safety. These were compared by using posture classification scheme of RULA and REBA. It was measured elapsed time to investigate the improved operational efficiency. The optimal posture of upper body to operate the hand wheel for field artillery troops was proposed.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1636-1641
• /
• 2011

Typically Korea Railroad is executing the limited inspection and general inspection about passenger car by mileage and the time elapsed.(ex. one year, two years) These types of inspection system continue from the beginning of the railroad operation of the steam locomotive age to present. According to the rolling stocks modernized and improved, mileage and the time elapsed for periodical inspection has been expanded but the basic maintainability system of rolling stocks is not that different from the past. This fact needs verification that modern inspection method is right from various fields. In this paper, we analyze the data that we get the maintenance record from Korea railroad company about periodical inspection and failure. Next to considering the correlation of periodical inspection with failure based on analyzed data for watching periodical inspection effects. And we desire to need efficient rolling stock maintenance system better than fixed periodical inspection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2401-2406
• /
• 2015

Pipelines are used by large heavy industries to deliver various types of fluids. Since this is important to maintain the performance of large systems, it is necessary to accurately predict remaining life of the corroded pipeline. However, predicting the remaining life is difficult due to uncertainties in the associated variables, such as geometries, material properties, corrosion rate, etc. In this paper, a statistical method for predicting corrosion remaining life is proposed using Bayesian inference. To accomplish this, pipeline failure probability was calculated using prior information about pipeline failure pressure according to elapsed time, and the given experimental data based on Bayes' rule. The corrosion remaining life was calculated as the elapsed time with 10 % failure probability. Using 10 and 50 samples generated from random variables affecting the corrosion of the pipe, the pipeline failure probability was estimated, after which the estimated remaining useful life was compared with the assumed true remaining useful life.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.27-33
• /
• 1999

This paper describes a new algorithm for irregular shapes allocation (known as nesting) and cutting path optimization, both implemented in PC-based software with graphic user interface (GUI). Main characteristic of the nesting W is that it deals with only vertices of Placed Pieces to reduce calculation time and for effective allocation. And the other characteristic of the nesting program is that every parts are grouped with respect to their areas and placed along the column of placement region. The cutting paths can be determined by an optimization method called simulated annealing. It was shown that the developed code is superior to other previous nesting H in elapsed time and waste ratio.

• Preventive Nutrition and Food Science
• /
• v.5 no.1
• /
• pp.7-9
• /
• 2000

Variouss concentrationss of free malonaldehyde were prepared from 1,1,3,3-tetraethoxy propane (TEP). Spectrophoto-metric determination and HPLC analysis of free malonaldehyde instead of malonaldehyde-thiobaribituric acid (MA-TBA) complex were conducted. Malonaldehyde was well separated on a $\mu$Bondapak C18 column. The absorbances at 254 nm and the HPLC peak areas of free malonaldehyde increased with the increase in its concentration. The correlation coefficient between absorbances and peak areas was 0.998. The total time elapsed to conduct the whole procedure was less than 15 minutes. This method directly measured the amount of free malonaldehyde in a short period of time successfully. This procedure is expected to be used as a rapid, accurate and specific means to de-termine the development of lipid oxidation in food.