• Journal of the Korean Society of Visualization
• /
• v.18 no.2
• /
• pp.18-27
• /
• 2020

Air lift pump operated by buoyancy is mainly used for the continuous circulation and the purification of fluids. In this study, the computational flow analysis has been performed with the geometric and operating conditions of the air lift pump. The numerical data from the analysis have been verified by comparing with the previous experimental data. The following results are obtained which advance the efficiency of the air lift pump. As the submergence length of pipe increases and the pipe length over the water surface decreases, the non-dimensional mass flow ratio increases in both cases. When the position of the air injection hole is within the pipe, the circulation range of the surrounding fluid becomes widened with the distance between the air injection hole and the pipe inlet relatively becoming narrower. It is more efficient both when the air injection velocity is at 10 m/s and at 15 m/s, and when the diameter of the pipe with holes is doubled near the water surface. It is expected that these results can be provided as fundamental data for operating the air lift pump.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.352-356
• /
• 2008

An analytical method has been developed for measuring chlorostyrenes in fish tissue sample. Extraction of chlorostyrenes from fish tissue was carried out by ultrasonication using acetone/n-hexane (5:2, v/v) mixture. Most of the lipids in the extract were eliminated by freezing-lipid filtration, prior to solid-phase extraction (SPE) cleanup. During freezing-lipid filtration, about 90% of the lipids extracted from the fish samples were easily removed without any significant losses of chlorostyrenes. For purification, SPE using Florisil was used for the rapid and effective cleanup. Quantification was performed using gas chromatography-mass spectrometry in the selected ion monitoring mode. Spiking experiments were carried out to determine the recovery, precision, and limits of detection (LODs) of the method. The overall recovery was above 80% in the spiked fish tissue sample at 10 and 100 ng/g levels, respectively. The detection limits for chlorostyrenes were ranged from 0.05 to 0.1 ng/g. This developed method is demonstrated to give efficient recoveries and LODs for detecting chlorostyrenes spiked into fish tissue with high lipid content.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.110-111
• /
• 2013

FcBP consisting of 13 amino acids specifically binds to Immunoglobulin G Fc domain. Initially, we utilized this peptide for preparation of antibody chip as a PEG composite for enhanced solubility. After then, the peptide conjugate was immobilized on agarose resin, resulting in highly efficient affinity column for antibody purification. The efficiency was comparable to commercial Protein A column. Recently, this peptide was conjugated with cell penetrating peptide (CPP) on a backbone of GFP, affording antibody transducer, which carries antibody into live cells by simple mixing of antibody and the transducer in cell culture media. Antibody transduction into cells was monitored by live cell imaging. More recently, the FcBP was fused to ferritin cage, which consists of 24 ferritin protein molecules. The FcBP-ferritin cage showed greatly increased binding affinity to human IgG. Its binding was analyzed by QCM and SPR analysis. Finally, it was selectively delivered by Herceptin to SKBR3, a breast cancer cell, over MCF10A, non-tumorigenic cells (Fig. 1). Fig. 1. Fluorescent microscopic images of SKBR3 breast cancer cells (A~C) and MCF10A breast cells (D~F) treated with Cy3-trastuzumab/fFcBP-Pf_Fn complexes. Trastuzumab and FcBP-Pf_Fn, which were labeled with Cy3 (Cy3-trastuzumab) and fluorescein (fFcBP-Pf_Fn), respectively, selectively targeted SKBR3 over MCF10A.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.277-284
• /
• 2010

As technology is developed, the quantity of new vocabularies is increasing more rapidly. So many vocabularies of technology have various meanings for each part and are used diversely according to circumstances. Therefore, the necessity of reasonable methods of standardization and purification is increasing and it is necessary to establish a classification system of terminology for the first phase of the standardization. Firstly, based on classification systems of power and IT standard dictionaries, scientific and technological standard, SPARK, power IT fields of IEC and organization units of corporations, we propose a new classification system for the standardization of power IT terminologies. The classification system consists of a hierarchical structure with general classification, application fields and specific technologies while keeping the conventional matrix-type classification system. And interpretation methods of power IT terminologies, which are classified according to the new classification system for the standardization of power IT terminologies, is proposed. The interpretation works of the power IT terminologies confirm that the classification system is systematic and the interpretation process is efficient.

• International Journal of Oral Biology
• /
• v.42 no.2
• /
• pp.71-78
• /
• 2017

BMP-2 is a well-known TGF-beta related growth factor, having a significant role in bone and cartilage formation. It has been employed to promote bone formation in some clinical trials, and to differentiate mesenchymal stem cells into osteoblasts. However, it is difficult to obtain this protein in its soluble and active form. hBMP-2 is expressed as an inclusion body in the bacterial system. To continuously supply hBMP-2 for research, we optimized the refolding of recombinant hBMP-2 expressed in E. coli, and established an efficient method by using detergent and alkali. Using a heparin column, the recombinant hBMP-2 was purified with the correct refolding. Although combinatorial refolding remarkably enhanced the solubility of the inclusion body, a higher yield of active dimer form of hBMP-2 was obtained from one-step refolding with detergent. The refolded recombinant hBMP-2 induced alkaline phosphatase activity in mouse myoblasts, at $ED_{50}$ of 300-480ng/ml. Furthermore, the expressions of osteogenic markers were upregulated in hPDLSCs and hDPSCs. Therefore, using the process described in this study, the refolded hBMP-2 might be cost-effectively useful for various differentiation experiments in a laboratory.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.105-109
• /
• 2015

In this paper is proposed for the oil return device developed to perform efficient emergency operation in the event the sea oil spill. Oil recovery apparatus for spilled oil on marine aims to quickly purged with high recovery. Oil recovery apparatus can prevent secondary pollution which may occur in the purification method using the adhesion agent and chemicals. Also it has excellent properties oil recovery. Adopted by the vapor explosion-proof mechanism to remove the risks that may occur during oil recovery operations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.276-276
• /
• 2013

Here we report an integrated microdevice consisting of an efficient passive mixer, a magnetic separation chamber, and a capillary electrophoretic microchannel in which DNA barcode assay, target pathogen separation, and barcode DNA capillary electrophoretic analysis were performed sequentially within 30 min for multiplex pathogen detection at the single-cell level. The intestine-shaped serpentine 3D micromixer provides a high mixing rate to generate magnetic particle-pathogenic bacteria-DNA barcode labelled AuNP complexes quantitatively. After magnetic separation and purification of those complexes, the barcode DNA strands were released and analyzed by the microfluidic capillary electrophoresis within 5 min. The size of the barcode DNA strand was controlled depending on the target bacteria (Staphylococcus aureus, Escherichia coli O157:H7, and Salmonella typhimurium), and the different elution time of the barcode DNA peak in the electropherogram allows us to recognize the target pathogen with ease in the monoplex as well as in the multiplex analysis. In addition, the quantity of the DNA barcode strand (~104) per AuNP is enough to be observed in the laser-induced confocal fluorescence detector, thereby making single-cell analysis possible. This novel integrated microdevice enables us to perform rapid, sensitive, and multiplex pathogen detection with sample-in-answer-out capability to be applied for biosafety testing, environmental screening, and clinical trials.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.952-956
• /
• 1998

An automated system was developed for the routine preparation of carbon-11 ($^11C$) labeled radiopharmaceuticals, which consisted of three major parts including [$^11C$]methylation of the precursor with [$^11C$] iodomethane ($[^11C]CH_3I)$, purification of the desired product and formulation of the final $^11C$ labeled radiopharmaceutical. The whole system included seven three-way slider valves, eleven solenoid valves, four pneumatic cylinders, a HPLC (High Performance Liquid Chromatography) system and a rotary evaporator. Using this system, we investigated the radiochemical synthesis of L-[$methyl-^11C$]methionine, which is the most widely used amino acid in tumor PET (Positron Emission Tomography) studies. The overall operation took 3035 min including the production of $[^11C]CH_3I$ (10.5 min) and decay-corrected radiochemical yield was 25%. The automated system we described herein can be widely utilized for the preparation of many $^11C$ labeled radiopharinaceuticals and has been shown to be efficient, reliable and easy to operate.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.79-86
• /
• 2019

A heterogeneous photocatalytic system is attracting much interest for water and air purification because of its reusability and economical advantage. Electrospun nanofibers are also receiving immense attention for efficient photocatalysts due to their ultra-high specific surface areas and aspect ratios. In this study, ZnO nanofibers with average diameters of 71, 151 and 168 nm are successfully synthesized by facile electrospinning and a subsequent calcination process at $500^{\circ}C$ for 3 h. Their crystal structures, morphology features and optical properties are systematically characterized by X-ray diffraction, scanning electron microscopy, UV-Vis and photoluminescence spectroscopies. The photocatalytic activities of the ZnO nanofibers are evaluated by the photodegradation of a rhodamine B aqueous solution. The results reveal that the diameter of the nanofiber, controlled by changing the polymer content in the precursor solution, plays an important role in the photocatalytic activities of the synthesized ZnO nanofibers.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.28-51
• /
• 2018

Graphitic carbon nitride ($g-C_3N_4$) as a fascinating visible light active semiconductor photocatalyst has medium band gap, non-toxic nature, stable chemical structure and high thermal stability. Recently, intensive researches are focused on photocatalytic activity of $g-C_3N_4$ for wastewater treatment. This review demonstrates latest progress in fabrication of graphitic carbon nitride $C_3N_4$ incorporated nanocomposite to explore photocatalytic ability for water purification. The $g-C_3N_4$-based nanocomposites were categorized as $g-C_3N_4$ metal-free nanocomposite, noble metals/$g-C_3N_4$ heterojunction, non-metal doped $g-C_3N_4$, transition and post transition metal based $g-C_3N_4$ nanocomposite. Apart from fabrication methods, we emphasized on elaborating the mechanism of activity enhancement during photocatalytic process.