• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.167-172
• /
• 2007

VM(Virtual Machine) can be considered as a software processor which interprets the machine code. Also, it is considered as a conceptional computer that consists of logical system configuration. But, the execution speed of VM system is much slower than that of a real processor system. So, it is very important to optimize the code for virtual machine to enhance the execution time. Especially the optimizer for a virtual machine code on embedded devices requires the highly efficient performance to the ordinary optimizer in the respect to the optimized ratio about cost. Fundamentally, functions and basic blocks which influence the execution time of virtual machine is found, and then an optimization for them nay get the high efficiency. In this paper, we designed and implemented the optimizer for the virtual(or abstract) machine code(VMC) using profiling. Firstly, we defined the profiling information which is necessary to the optimization of VMC. The information can be obtained from dynamically executing the machine code. And we implemented VMC optimizer using the profiling information. In our implementation, the VMC is SIL(Standard Intermediate Language) that is an intermediate code of EVM(Embedded Virtual Machine). Also, we tried a benchmark test for the VMC optimizer and obtained reasonable results.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.589-594
• /
• 2004

In design of suspension system for KHST, it was applied the approximated optimization method using meta-models which called Response Surface Model and Neural Network Model for 29 design variables and 46 performance index. These models was coded using correlation between design variables and performance indices that is made by the 66 times iterative execution through the design of experimental table consisted orthogonal array L32 and D-Optimal design table. The results show that the optimization process is very efficient and simply applicable for complex mechanical system such as railway vehicle system. Also it was compared with the sensitivity of some design variables in order to know the characteristics of two models. This paper describes the general method for dynamic analysis and design process of railway vehicle system applied to KHST development, and proposed the efficient methods for vibration mode analysis process dealing with test data and the function based approximation method using meta-model applicable for a complex mechanical system. This method will be able to apply to the other railway vehicle system in oder to systematize and generalize the design process of railway vehicle dynamic system.

• Spatial Information Research
• /
• v.21 no.4
• /
• pp.47-62
• /
• 2013

Recently there are growing arguments about the needs to improve Cadastral Resurvey Projects more efficiently and rationally since the projects have realistically started. This study aims to analysis some problems of the projects and finds out the solutions. With this purpose, we have surveyed some literatures related to the demonstration projects, and then have examined some similar domestic urban development projects and international Cadastral Resurvey Projects in order to apply their appropriate tools to the present or future projects. Generally the execution process of Cadastral Resurvey Projects has four steps and this study arranges the main problems in each steps. In the result it suggests that some improvements should change as the followings. (1) It is more effective to take planning-based approach than project-based one. (2) The project boundary needs to be decided with the rectangular patterns not the irregular ones for the efficient project. (3) The adjusting the current baseline of agreement should be reconsidered because too high baseline may make the project difficult to progress. (4) Not only systematical public relations to promote the projects but also a variety of incentives to induce the public participations is very important to solve the problems of involvement. (5) Institutional tools for collaborate planning is also desirable to solve the conflicts among stakeholders rationally and effectively.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.2
• /
• pp.127-134
• /
• 2022

Production management in the automobile parts industry is carried out according to the production plan of the customer, so it is important to prevent shortages in product supply. As the product composition became increasingly complex, the MES System was built for the purpose of efficient production plan management and inventory management, but its utilization is low. This study analyzed the problems of the MES system and sought to improve it. Through previous studies, it was confirmed that the inventory management of the pull approach that actually occurred in the warehouse is more suitable than the push approach based on the forecast of the warehouse for the volatility, complexity, and uncertainty of orders in the auto parts industry. To realize this, we tried distributed MRP by using the ADO function of VBA to link the standard information of the MES system with Excel and change the structure of the BOM table. Through this, it can help increase the accuracy of production planning and realize efficient inventory management, thereby increasing the utilization of the MES system in the auto parts industry and enhancing the competitiveness of the company.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3804-3814
• /
• 2000

This paper presents an efficient implementation of a run-time monitor which checks the satisfaction of the timing constraints of real-time object-oriented programs based on a real-time object model called TMO(Time-triggered Messagedtriggered Object). An execution environment of TMO programs on Windows as, WTMOS(Windows TMO System) has been utilized for the implementation and an experimental application for thermostatic control has been developed to analyze the performance of the run-time monitor. We suggest a methodology for application programmers to specify the target methods with the monitoring conditions and an implementation technique which incurs the small cost by effectively distributing the functions of the monitor into the WTMOS and a TMO object.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.7-12
• /
• 2023

Remote sensor systems are utilized in a few applications, including military, restorative, ecological and family unit. In every one of these applications, vitality use is the deciding component in the execution of wireless sensor systems. Thusly, strategies for information steering and exchanging to the base station are critical in light of the fact that the sensor hubs keep running on battery control and the vitality accessible for sensors is constrained. There are two explanations for the various leveled directing Low Energy Adaptive Clustering Hierarchy convention be in investigated. One, the sensor systems are thick and a considerable measure of excess is engaged with correspondence. Second, with a specific end goal to build the versatility of the sensor arrange remembering the security parts of correspondence. In this exploration paper usage of LEACH steering convention utilizing NS2 test system lastly upgraded vitality productive EE-LEACH directing convention guarantees that the chose cluster heads will be consistently conveyed over the system with a specific end goal to enhance the execution of the LEACH convention. EE-LEACH enhances vitality utilization by around 43%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6C
• /
• pp.651-657
• /
• 2006

This paper propose the technique for the execution authentication of digital signature with TTS(traceable trust server) to guarantee the safe execution of mobile agents. That is to say, it is focused on improving the processing speed of systems and the traffic of network which are problems in the existing studies. The digital signature is used to guarantee the efficient and safe execution and the integrity of mobile agents. The certificate of it is chained with synthesis function, cryptographic algorithm based on public key, and hash function. And white hosts can be protected against the threat of being used maliciously. Then, we prove the efficiency of system overhead and the traffic of network by the analysis. In case the certificate chain of a digital signature is used, the safe execution of mobile agents can be protected against attackers that wish to insert a newly created certificate after cutting off the chain after striking space key 2 times.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.4
• /
• pp.293-304
• /
• 2005

In this paper, we research on job migration in a grid computing environment with cactus and MPICH-C2 based on Globus. Our concepts are to perform job migration by finding the site with plenty of computational resources that would decrease execution time in a grid computing environment. The Migration Manager recovers the job from the checkpointing files and restarts the job on the migrated site. To select a migrating site, the proposed method considers system's performance index, cpu's load, network traffic to send migration job tiles and the execution time predicted on a migration site. Then it selects a site with maximal performance gains. By selecting a site with minimum migration time and minimum execution time. this approach implements a more efficient grid computing environment. The proposed method Is proved by effectively decreasing total execution time at the $K\ast{Grid}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.7
• /
• pp.553-564
• /
• 1990

The co-efficient matrix of linear second-order partial differential equations in the general form is partitioned with (n-1)x(n-1) submartices and is transformed into the block tridiagonal system. Then the cyclic odd-even reduction technique is applied to this system with the large-grain data granularity and the block cyclic reduction algorithm to solve unknown vectors of this system is created. But this block cyclic reduction technique is not suitable for the parallel processing system because of its parallelism chanigng at every computing stages. So a new algorithm for solving linear second-order partical differential equations is presentes by the block cyclic reduction technique which is modified in order to keep its parallelism constant, and to reduce gteatly its execution time. Both of these algoriths are compared and studied.

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.1
• /
• pp.53-64
• /
• 2007

Purpose: Ths study aims to examine characteristics of patients using emergency room after execution of five-day workweek system by government and provide basic materials for operation of efficient emergency room. Methods: Data were collected tbrough medical records of patients visiting emergency room from July of 2004 to October of 2006 and they were analyzed with SPSSlPC 10.0. Conclusion : 1. The number of patients visiting emergency room was average 16.7 persons a day in 2004, 17.5 in 2005 and 18.6 in 2006 and it was found that it was increasing every year since the execution of five-day workweek system 2. Gender distribution of subjects using emergency room was higher in male than in female every year. 3. Means of transport to emergency room were mostly private car and others(public transport or on foot), but use of ambulance was increasing. 4. Residential areas of subjects were mostly 'Myeon area' in 2004~2005, but it was changed to residents at 'Eup area' in 2006. 5. Distribution of patients by medical departments was highest in internal medicine and surgery in 2004~2006 and rate of visiting pediatrics was increasing every year. 6. Time to stay at emergency room was most at 'below 30 min'. in 2004~2006, but cases of stay for 'more than 2 hours' were increasing every year. 7. On presence or absence of trauma in patients visiting emergency room, rate of visit to emergency room with 'no trauma' was higher and this result was increasing every year. 8. As a result of classifying severity of patients visiting emergency room, use rate of emergency room by 'non-emergency' patients was over 90% in 2004~2006 and such a phenomenon was deepened in 2006 compared to that in 2004. 9. Measures after emergency care of patients were most in case of 'discharge' in 2004~2006, but cases of admission to hospital after emergency care were increased every year. 10. According to use of emergency room by a day of the week, use on Sunday was most frequent in 2004~2006, but use on Friday the day before holiday was increasing. 11. According to distribution by age, use by those between '40~49' was most in 2004~2005, but use by those 'below 10' was most in 2006. 12. According to time to visit emergency room, using emergency room at "15:31~23:30 was most in 2004~2006, cases of visiting emergency room at day working hour were decreased every year and those at evening and night working hours were increased. Conclusion: In sum, it was found that characteristics of patients visiting emergency room and their actual status were changed after the execution of five-day workweek system and efforts to rearrange emergency medical system are required.