• 전력전자학회논문지
• /
• 제8권3호
• /
• pp.211-220
• /
• 2003

본 논문은 직접 토오크 제어 (Direct Torque control, DTC)를 이용한 릴럭턴스 동기전동기 (Reluctance Synchronous Motor, RSM)의 최대 효율 제어에 관한 연구이다. 릴럭턴스 동기전동기의 등가모델 해석에 있어서 철손의 영향을 고려하여 이론적으로 분석하였으며, 최대효율제어를 위하여 토크 전류와 여자전류 사이의 최적 각을 유도하였다. 릴럭턴스 동기전동기의 경우는 자속이 전류에 비례하므로 유도전동기와는 달리 자속레벨을 제어하면서 토오크의 동특성을 유지할 수 있다는 특징을 가지고 있으며, 제시된 연구에서는 릴럭턴스 동기전동기의 이러한 특징을 적용하여 직접 토오크 제어의 장점인 빠른 토오크 응답특성을 유지하면서 최대 효율 제어가 이루어지도록 한다. d/q 릴럭턴스 비가 2.57인 1.0 Kw 릴럭턴스 동기전동기를 이용하여 실험을 통해 제안된 방법들의 정당성을 입증하였다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.456-461
• /
• 2012

We studied the emission characteristics of white phosphorescent organic light-emitting diodes (PHOLEDs), which were fabricated using a two-wavelength method. To optimize emission characteristics of white PHOLEDs, white PHOLEDs with red/blue, blue/red and red/blue/red emitting layer (EML) structures were fabricated using a host-dopant system. In case of white PHOLEDs with red/blue structure, the best efficiency was obtained at a structure of red (15 nm)/blue (15 nm). But the emission color was blue-shifted white. In case of white PHOLEDs with blue/red structure, the better color purity and efficiency were observed at a blue (29 nm)/red (1 nm) structure. For additional improvement of color purity in white PHOLEDs with blue (29 nm)/red (1 nm) EMLs, we fabricated white PHOLEDs with red (1 nm)/blue (28 nm)/red (1 nm) structure. The current efficiency, external quantum efficiency, and CIE (x, y) coordinate were 27.2 cd/A, 15.1%, and (0.382, 0.369) at 1,000 $cd/m^2$, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권5호
• /
• pp.1333-1353
• /
• 2012

The robustness of a network is usually measured by error tolerance and attack vulnerability. Significant research effort has been devoted to determining the network design with optimal robustness. However, little attention has been paid to the problem of how to improve the robustness of existing networks. In this paper, we investigate how to optimize attack tolerance and communication efficiency of an existing network under the limited link addition. A survival fitness metric is defined to measure both the attack tolerance and the communication efficiency of the network. We show that network topology reconfiguration optimization with limited link addition (NTRLA) problem is NP-hard. Two approximate solution methods are developed. First, we present a degree-fitness parameter to guide degree-based link addition method. Second, a preferential configuration node-protecting cycle (PCNC) method is developed to do trade-off between network robustness and efficiency. The performance of PCNC method is demonstrated by numerical experiments.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.500-507
• /
• 1989

본 논문에서는 흡배기 변동압을 실측하여 이것을 계산의 입력수치로 사용 하는 전산프로그램을 개발하여 간단하면서도 정확한 사이클 시뮬레이션이 가능하도록 하여 체적효율을 예측하였다.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.295-301
• /
• 2006

A new combustion method of high compression ratio SI engine was studied and proposed in order to achieve high thermal efficiency, comparable to that of CI engine. Compression ratio of SI engine is generally restricted by the knocking phenomena. A combustion chamber profile and a cranking mechanism were studied to avoid knocking with high compression ratio. Because reducing the end-gas temperature will suppress knocking, a combustion chamber was considered to have a wide surface at the end-gas region. However, wide surface will lead to large heat loss, which may cancel the gain of higher compression ratio operation. Thereby, a special cranking mechanism was adapted which allowed the piston to move rapidly near TDC. Numerical simulations were performed to optimize the cranking mechanism for achieving high thermal efficiency. An elliptic gear system and a leaf-shape gear system were employed in numerical simulations. Livengood-Wu integral, which is widely used to judge knocking occurrence, was calculated to verify the effect for the new concept. As a result, this concept can be operated at compression ratio of fourteen using a regular gasoline. A new single cylinder engine with compression ratio of twelve and TGV(Tumble Generation Valve) to enhance the turbulence and combustion speed was designed and built for proving its performance. The test results verified the predictions. Thermal efficiency was improve over 10% with compression ratio of twelve compared to an original engine with compression ratio of ten when strong turbulence was generated using TGV, leading to a fast combustion speed and reduced heat loss.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.508-511
• /
• 2002

By defining a power distribution ratio (PDR) and coupling efficiency (CE) amenable to the rigorous analytical solutions of newly developed rigorous modal transmission-line theory (MTLT), we explicitly analyze the power coupling characteristics of TE modes propagating in GADCs. The numerical results reveal that the incident power is optimally coupled into the desired guiding channel if the powers of rigorous modes excited at the input boundary of grating-assisted coupler are equally partitioned.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.59-66
• /
• 1992

This Paper, first, tries to optimize the output specifications with uncertain characteristics. And then aims to solve the problem not only by making use of transformed multiple regression equation which can yield objective function of output characteristics but also by formulating developed multiple fuzzy goal programming using fuzzy set theory which can treat uncertainty easily, and the efficiency of these techniques, will be also demonstrated through a case study.

• 대한방사선협회지
• /
• 제28권1호
• /
• pp.120-144
• /
• 2002

Purpose The quality assurance in a computed tomography gives a definition to be all the activity so as to optimize the performance of the device and keep an invariable quality of image, and it is to raise a high diagnostic efficiency to obtain a much info

• 한국항해학회지
• /
• 제22권2호
• /
• pp.81-87
• /
• 1998

On this paper, the methods of optimization research of the fishing navigation using the graph theory are substantiated on the basis of the proposed probable model of the fishing vessel navigator's activity. The graph theory is concered about the transitionform the top graph to the rib one. And the definition of the additional system elements (quasi elements) necessary to provide the effectiveness during the fishing navigation are also substantiated herein. This approach helps to optimize the structure of any fishing vessel monitoring system.

• 자원리싸이클링
• /
• 제11권3호
• /
• pp.17-24
• /
• 2002

There has been an increasing demand over the years for steels with lower[s] content. For the purpose of improving the efficiency of desulphrization in the powder injection process of ladle, experimental studies were carried out by using cold model to optimize the lance configuration, gas flow rate, immersion depth of lance nozzle, position of lance nozzle relative to the ladle and the effect with slag, etc. As the results of this study, it was made clear that 2-hole nozzle lance (C, E type) placed in an asymmetric position gives the shortest mixing times.