• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.18-24
• /
• 2012

This study simulated the operation of a steam injected gas turbine combined heat and power (CHP) system. A full off-design analysis was carried out to examine the change in the turbine blade temperature caused by steam injection. The prediction of turbine blade temperature was performed for the operating modes suggested in the previous study where the limitation of compressor surge margin reduction was analyzed in the steam injected gas turbine. It was found that both the fully injected and partially injected operations suggested in the previous study would cause the blade temperature to exceed that of the pure CHP operation and the under-firing operation would provide too low blade temperature. An optimal operation was proposed where both the turbine inlet temperature and the injection amount were modulated to keep both the reference turbine blade temperature and the minimum compressor surge margin. The modulation was intended to maintain a stable compressor operation and turbine life. It was shown that the optimal operation would provide a larger power output than the under-firing operation and a higher efficiency than the original partially injected operation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.307-312
• /
• 2000

This study was carried out to develop an automatic grafting system suitable for fruit-vegetable seedlings. The study consisted of two research sections: 1) development of a medium-sized, low-cost automatic grafting system for cooperative farms and commercial seedlings production company, and 2) commercializing research for prototype development based on the above concepts. The grafting robot developed in this research can be described as follows, a. Developed grafting robot can cover the whole operations for grafting scion and rootstock, only if operator provides scion and rootstock tray. b. Five seedlings can be grafted at one time, and about 1,200 seedlings can be grafted in one hour. c. The success ratio of mechanical grafting scion and rootstock with ceramic pin bonding provided by the holder is more than 95% when the conditions of seedlings are satisfied. d. The grafting efficiency has improved over 10 times compared with manual work, and the grafting cost generated 44% savings.

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.137-142
• /
• 2006

D/In modern production industries, computer aided systems have been improving the efficiency and convenience of the various stages of work. However. as the complexity of computerized production systems increases, various techniques are still necessary. The problem we addressed occurs in computer systems that automatically make manufacturing process plans in the metal grating manufacturing industry. In the grating layout design, the key to saving the manufacturing cost is to find a design with the minimal number of cutting operations. The proposed genetic algorithm explores the feasible alternatives within the space until an optimal solution is obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.278-287
• /
• 2012

In this paper, we propose an allocation scheme for variable message packings to increase efficiency of military operation using Link-16 which is well-known for tactical data link by delivering imagery information rapidly. We propose a variable message packing scheme using COC waveform to support variable data rate under some coverage limitation. Variety of message packing makes Link-16 vary transmission rate appropriately for tactical environment. We also propose a allocation scheme to assign message packing to time slot properly. Finally we verify the performance and superiority of proposed ideas by simulations.

• Journal of Korea Multimedia Society
• /
• v.24 no.5
• /
• pp.676-683
• /
• 2021

Wi-Fi Round-trip timing (RTT) based location estimation technology estimates the distance between the user and the AP based on the transmission and reception time of the signal. This is because reception instability and signal distortion are greater than that of a Received Signal Strength Indicator (RSSI) based fingerprint in an indoor NLOS environment, resulting in a large position error due to multipath fading. To solve this problem, in this paper, we propose an end-to-end based WiFi Trilateration Net (WTN) that combines neural network-based RTT correction and trilateral positioning network, respectively. The proposed WTN is composed of an RNN-based correction network to improve the RTT distance accuracy and a neural network-based trilateral positioning network for real-time positioning implemented in an end-to-end structure. The proposed network improves learning efficiency by changing the trilateral positioning algorithm, which cannot be learned through differentiation due to mathematical operations, to a neural network. In addition, in order to increase the stability of the TOA based RTT, a correction network is applied in the scanning step to collect reliable distance estimation values from each RTT AP.

• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.423-435
• /
• 2022

Ground vibration generated repeatedly in blasting tunnel excavation sites is known to be one of the major hazards induced by blasting operations. Various studies have been conducted to minimize these hazards, both theoretical and empirical methods using electronic detonator, the deck charge method, the center-cut method among others Among these various existing methods for controlling the ground vibration, in this study, we investigated the cut method. In particular, we analyzed and compared the V-cut method, which is commonly used in tunnel blasting, to the double-drilled parallel method, which has recently been introduced in tunnel excavation site. To understand the rock fragmentation efficiency as well as the ground vibration controllability of the two methods, we performed in-situ field blasting tests with both cut methods at a tunnel excavation site. Additionally, numerical analysis by FLAC3D has been executed for a better understanding of fracture propagation pattern and ground vibration generation by each cut method. Ground vibration levels, by PPVs measured in field blasting tests and PPVs estimated in numerical simulations, showed a lower value in the double-drilled parallel compared with the V-cut method, although the exact values are quite different in field measurement and numerical estimation.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.466-476
• /
• 1995

This pater describes pipelining algorithm issues for a VLIW(Very Long Instruction Word) System and the effective pipelined processing method by occurrence in pipelined management of processor minimized to timing delay. The proposed algorithm is executed in pipeline and parallel processings, and by combining basic operations variable instruction set can be desinged for various applications. In this paper, we prove and analyze the efficiency of the proposed pipeline algorithm and compare with other processor pipeline algorithm in terms of time minimizing.

• Journal of Internet Computing and Services
• /
• v.5 no.5
• /
• pp.39-48
• /
• 2004

For transporting real-time multimedia traffic, RTP is considered as one of the most promising protocols operating at application layer. In order to manage and control the real-time multimedia traffic within networks, network managers need to monitor and analyze the traffic delivering through their networks. However, conventional traffic analyzing tools can not exactly classify and analyze the real-time multimedia traffic using RTP on the basis of real-time as well as non-real-time operations. In this paper, we propose an efficient online classification method of RTP packets, which can be used on high-speed network links. The accuracy and efficiency of the proposed methodhave been tested using captured data from a KIX node with 100 Mbps links, which interconnects between domestic and overseas Internet networks and is operated by NCA.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.11-21
• /
• 2014

Multi-scale image segmentation is important in many applications such as image stylization and medical diagnosis. This paper proposes a novel segmentation algorithm based on MSER(maximally stable extremal region) which captures multi-scale structure and is stable and efficient. The algorithm collects MSERs and then partitions the image plane by redrawing MSERs in specific order. To denoise and smooth the region boundaries, hierarchical morphological operations are developed. To illustrate effectiveness of the algorithm's multi-scale structure, effects of various types of LOD control are shown for image stylization. The proposed technique achieves this without time-consuming multi-level Gaussian smoothing. The comparisons of segmentation quality and timing efficiency with mean shift-based Edison system are presented.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.139-150
• /
• 2019

Purpose: LST-II is a special naval ship to carry out landing operations by transporting tanks, armored vehicles and military vehicles. Bad weather, maximum wave height of 4-5 m, caused damage to the LCM cradles while the LST-II No.O ship was moving to Thailand for training in February 2016. Methods: Based on the results of the field check, DTaQ conducted a study on the causes analysis and improvement measures. Results: The improvement plan that was derived was verified through a structural analysis and the improvement plan was applied to the follow-up ships. Conclusion: The improvement of LCM cradle has increased the safety of the crew and landing forces, and improved the operational efficiency.