• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.1
• /
• pp.29-43
• /
• 2012

We design a DEA-AR model using multiple regression analysis with new methods which limit weights. When there are multiple input and single output variables, our model can be used, and the weights of input variables use the regression coefficient and coefficient of determination. To verify the effectiveness of the new model, we evaluate the efficiency of the Regional Corporations in Korea. Accordance with statistical analysis, it proved that there is no difference between the efficiency value of the DEA-AR using AHP and our DEA-AR model. Our model can be applied to a lot of research by substituting DEA-AR model relying on AHP in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.7
• /
• pp.529-536
• /
• 2007

The perforated type element for a heat recovery ventilation system has been studied to improve the performance. Four holes of diameter of 6mm are punched out for each flow channel to break the boundary layer development and increase the turbulence. KS cooling and heating conditions and test procedures are applied for study. The efficiencies are compared to those of the typical element with smooth surface. For cooling operations, the temperature, latent and enthalpy efficiencies increase 2.5%, 18% and 8%, respectively. For heating operations, the temperature, latent and enthalpy efficiencies increase 3%, 5% and 3.2%, respectively.

• Journal of Applied Reliability
• /
• v.11 no.1
• /
• pp.83-95
• /
• 2011

Boiler efficiency has a direct impact on energy consumptions, which results in lower cost of operations and services. Usually high efficiency boilers are regarded as boilers with an efficiency of greater than 90%. However, it is likely that normal boilers are running at significantly lower efficiencies than this. This paper presents a process of developing a highly efficient energy consumption boiler. We adopt direct heat method while normal boilers are designed as indirect heat method. The submerged combustion method is considered to design for very high efficient boiler.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.1
• /
• pp.91-116
• /
• 2015

This study aims to provide public sectors with eco-efficiency information. To implement the purposes of the study, environmental and economic variables of Eco-Efficiency were identified through decision tree model, then the relative Eco-Efficiencies of 243 public sectors were evaluated through input-oriented DEA (Data Envelopment Analysis) model. Specifically, the amount of public purchasing per a staff and the amount of energy use per a staff were considered as input factors. Sales per a staff was considered as output factor. The result shows that most of the public sectors (94.2%) were evaluated as "inefficient" taking into consideration of average value, 0.501 from market-based public corporations, 0.288 from local public corporations, 0.28 from quasi-market-based public corporations, 0.269 from fund-management-based quasi-governmental institutions, 0.09 from non-classified public institutions, and 0.078 from commissioned-service-based quasi-governmental institutions. Furthermore, it is possible to establish a plan for internal Eco-Efficiency improvement based on information of the reference set. In order to improve the Eco-Efficiency in the public sectors in the long term, environmental impacts of the overall public sectors' operations (e.g., energy saving, water saving, waste reduction, and purchasing of green products) needs to be properly proposed in consideration of BSC (Balanced Scorecard) indicators of public sectors.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.145-149
• /
• 2015

A reconfigurable lighting engine for widely used lighting models is proposed for low-power GPU shaders. Conventionally, lighting operations that involve many complex arithmetic operations were calculated by the shader programs on the GPU, which led to a significant energy overhead. In this letter, we propose a lighting engine to improve the energy-efficiency by supporting the widely used advanced lighting models in hardware. It supports the Blinn-Phong, Oren-Nayar, and Cook-Torrance models, by exploiting the logarithmic arithmetic and optimizing the trigonometric function evaluations for the energy-efficiency. Experimental results demonstrate 12.7%, 42.5%, and 35.5% reductions in terms of power-delay product from the shader program implementations for each lighting model. Moreover, our work shows 10.1% higher energy-efficiency for the Blinn-Phong model compared to the prior art.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.10a
• /
• pp.186-189
• /
• 1996

In most of the recent research literature, network performance is expressed in terms of network engineering measures such as delay or loss. These performance measures are important to network owners and operators, but it is believed that user preferences should be the primary consideration which drives the resource allocation scheme. A network is only as valuable as its users perceive it to be. Therefore, it is advocated that the users themselves determine relative traffic priorities. This paper describes the role of feedback in network resource allocation, which could be part of a user-oriented framework for network operation and control. Feedback mechanism can also be used to improve the two types of efficiency in the network; network efficiency and economic efficiency.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.45-61
• /
• 2004

This study is to identify the differences in service quality for the 2nd-scale hospital Industries. The subjects of this survey for the empirical analysis are limited to the 2nd- scale hospitals in Korea: data are collected in Seoul, Incheon and Kyungki areas. The results are as follows. First, the efficiency for hospital operations confirmed the differences in bed scale. Second, the high-efficiency hospitals attach importance to efficiency with more than 100 bad scale and the low-efficiency hospitals attach Importance to service quality with less than 100 bed scale.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.977-985
• /
• 2011

Airborne separation assurance is a key requirement for Free Flight Airspace operations, This paper study the feasibility of airborne separation assurance for free flight Airspaces operations by evaluating the efficiency measurement models. Three qualitatively different methods are utilized; one based Ground and Air conflict probability model, other based Dynamic Density model. the other based Direct operating cost model. The evaluation is Direct Operating Cost model and Two metrics are utilized for the efficiency measurements; airborne separation assurance performed quite well in the Free Flight evaluation; (1) 2 scenario of the conflict situations are resolved; (2) The MD-80 flight peformed separation assurance and efficiency, Not only appling for geometric method algorithm is more efficiently than potential method, but also the most efficiently geometric combined method.

• Tunnel and Underground Space
• /
• v.32 no.4
• /
• pp.254-271
• /
• 2022

The performance of truck haulage operations in an underground mine was evaluated using the time usage model and key performance indicators (KPIs) proposed by Global Mining Guidelines Group (GMG). An underground mine that mainly produces iron and titanium iron was selected as a study area, and truck haulage data were collected using Bluetooth beacons and tablet PCs. The collected data were analyzed to identify unit operations, activities, events, and required time of truck haulage operations, and time categories were classified based on the time usage model. The performance of the haulage operations was evaluated using nine indicators in terms of availability, utilization, and effectiveness. As a result, in terms of availability, uptime was 33.9%, physical availability was 95.7%, and mechanical availability was 94.9%. In the case of utilization, use of availability was 83.1%, asset utilization was 28.1%, and operating and effective utilization were 79.6% and 77.7%, respectively. Also, in terms of efficiency, operating efficiency was high at 97.6%, and production effectiveness was found to be 49%.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.1
• /
• pp.113-119
• /
• 2015

Recently, even though firefighting operations are supposed to be incorporated into single body IAW restructuring of the government organizations, in terms of efficiency it is still difficult to find any significant improvements due to the centrally and locally segregated operating bodies and also, as with organizations firefighting manpowers are divided nationally and locally, which results in differing firefighting functioning. Although governments firefighting bodies are changed to operate better, there are always limitations in firefighting operations. This study explores firefighting organizations, manpower, equipment and operations itself to optimize firefighting operations, and ultimately, to provide the future-oriented functions and roles of the firefighting aviation corps.