• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.23-30
• /
• 2009

LED조명장치는 자동차분야, 항공, 디스플레이, 전송장치 그리고 특수조명등의 응용장치로의 활용이 증가하고 있다. 일반적으로 고출력 RGB 멀티칩 LED는 표시용이나 경관조명용 또는 감성조명용으로 적용되고 백색 LED는 표시용 조명에서 최근 들어 일반조명용으로 적용되고 있으며, 고출력 백색 LED의 출시와 광효율의 증가는 이를 더욱 가속화하고 있다. 본 논문에서는 백색 LED와 RGB 멀티칩 LED 조명장치를 동일한 사양으로 제작하여 물리적, 전기적, 광학적 조명특성을 분석하여 향후 LED조명시스템의 제작에 정량적 데이터를 제공하고자 한다. 이를 위해 LED의 주요한 물리적 특성인 방열특성에 대한 성능분석, 전기적 특성의 분석을 위한 전력 및 드라이브 효율에 대한 성능분석을 수행하였고 조명특성을 위한 연색성, 배광특성, 광효율을 측정하였다. 백색 LED와 RGB 멀티칩 LED 조명장치를 활용한 응용장치의 적용방법을 확립하고 나아가 다양한 조명시스템에 LED 조명장치를 적용하는데 참고가 되는 기초 데이터를 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.293-295
• /
• 2004

PLS(Plasma Light System) is one of the electrodeless lamp discharged by micro wave. In this new lamp has high efficacy and CRI(Color Rendering Index). It is mainly composed of microwave part and optical part. Microwave parts consist of magnetron, wave-guide and cavity-mesh, while optical parts consist of bulb, mirror and reflector. In this paper, we studied experimentally the heat-resistance and temperature distribution characteristics of bulb in PLS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.403-405
• /
• 2004

This paper describes an implementation of Home network Control Protocol(HnCP) and it's application to an Intelligent lighting system. The HnCP was announced by korea PLC forum in June 2003 to provide a network protocol for PLC based home appliances. The HnCP master and HnCP slaves were implemented using XPLC30 which is an SOC with ARM9 core. The efficacy of the developed HnCP network modules were shown by applying them to a intelligent lighting system composed of dimmable fluorescent lamps. An extended message set was proposed for the intelligent lighting system and we proposed some directions for the future development of HnCP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.68-71
• /
• 2003

In this paper, We have investigated the luminous flux, luminous efficacy, spectral energy distribution, colour rendering index, correlated colour temperature of electrodeless QL lamp system as a center method of measurement and side method of measurement. A result of measurement is that center method of measurement and side method of measurement is almost similar. Therefore, Sample that didn't measured because of big size and heavy weight can be measured by center method of measurement.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.555-558
• /
• 2017

본 논문은 서로 다른 크기의 교류 전원을 인가하더라도 균일한 소비 전력과 광 효율을 나타낼 수 있는 이종 전원 지원 AC LED 구동 장치를 설계 하였다. 서로 다른 크기의 입력 전압과 편차를 설정하여, 두 입력전압에서 전기적 광 특성이 동일함을 확인 하였다. 또한 교류 전원의 피크전압에 따라 특정 LED 구간에서 발생하는 미 점등을 개선하여, 모든 상용 교류 입력 전압에서 전 구간 LED 점등을 구현하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.187-190
• /
• 2002

The Electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. but Increasing awareness of electromagnetic compatibility(EMC) issues in lighting application, the problems of interference generation by electrodeless fluorescent lighting system have been highlighted. In this paper, Maxwell 2D finite element analysis program(Ansoft) is used to obtain electromagnetic properties associated with the coil and nearby structures. and also evaluated Flux B, H by changing the input current.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1997년도 추계학술발표회논문집
• /
• pp.7-10
• /
• 1997

• 한국태양에너지학회 논문집
• /
• 제34권1호
• /
• pp.19-27
• /
• 2014

Exterior vertical illuminance is an important factor for lighting control. But, there are not many researches about the exterior illuminance on a vertical surface. In this study, we predicted the exterior illuminance on a vertical surface using vertical luminous efficacy. First, we calculated the vertical luminous efficacy according to the sky clearness category. And we performed the statistical analysis of the measured and the calculated illuminance with luminous efficacy. The MBE and RMSE of the predicted exterior illuminance were-1.2% and 15.5%, respectively. Second, the annual illuminance on a vertical surface calculated with the luminous efficacy and the short-term measured solar irradiance was suggested in this study.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.653-656
• /
• 2014

$Cs_3Sb$ photocathode was formed by newly developed process and successive in-situ lighting devices were fabricated in a process chamber. R, G, and B phosphors were applied on the anode plate, respectively. Major parameters such as brightness, power consumption, and efficacy were measured. The wavelength of LED excitation source was 450 nm. Both high power and low power modes were applied in the measurement. Measurement values were clearly differentiated by the voltage application modes. The measured values of each parameter was good enough to be applied for general lighting source. The results showed that $Cs_3Sb$ photocathode formed in atmospheric conditions was functioning as good as the photocathode formed in UHV conditions, and thus it could be applied to advanced lighting devices.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.330-334
• /
• 2013

We developed a package of remote phosphor structure having blue LED chips and phosphors physically separated, and the characteristics were evaluated according to different classifications of phosphor coatings. Remote phosphor was produced by screen printing coating on glass substrate with phosphor content rated paste and heat treatment. After mounting Remote phosphor, which has been classified according to number of coatings, on top of blue LED chips, luminous flux, luminous efficacy, CCT and CRI were measured. The measurement results showed the most suitable characteristics of white LED package as a general light source when the content rate of phosphor in Remote phosphor was 80 wt.% with 3 layers of coatings and thickness over $12{\mu}m$.