• Journal of the Korean Society of Visualization
• /
• v.20 no.3
• /
• pp.67-73
• /
• 2022

Underwater environmental pollution caused by microplastic particles is considered to be one of the most serious problems in many oceans and countries nearby. Previous academic studies or field technologies tried to remove the micro-sized particles are often energy-consuming and costly, so it is hard to be employed for the actual uses. In this study, the mechanism of removal of micro-sized polyethylene spheres (size in order of 100㎛) using a rising bubble is experimentally investigated. It is found that the particles are either affected by bubble wake, thus translocated close to the water surface, or pushed far away by the surrounding fluid flow, depending on their initial position relative to the bubble. By scrutinizing the visualized behaviors of bubble-particle interaction, we draw the governing parameter, i.e., the polar angle between the particle and the bubble, to determine the effective capturing of the particles with a rising bubble.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.359-360
• /
• 2022

In light of the unprecedented occupational health and safety concerns that have been raised in the wake of the COVID-19 pandemic, the importance of seafarers' mental health has been significantly underlined. Despite the fact that there has been a significant amount of research on the psychological threats of seafarers' mental health, mutual cooperative actions on this issue have not been properly coordinated among seafarers' relevant bodies and stakeholders in APEC region. This paper introduces the APEC SEN's initiatives that have been undertaken to improve the mental health of seafarers, in collaboration with medical professionals, seafarers' unions, maritime administrations, and other stakeholders, through the development of training programmes and materials for both seafarers and modulators, resulting in a more effective approach to mental healthcare promotion.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.1-12
• /
• 1990

Interactions between a propeller and vortex system contained in a ship stern flow is treated theoretically. A new formulation to determine the effective velocity distributions is developed, which may be immediately applicable to the design and analysis of compound propulsors under the influence of severe vortical cross-flows around ship stern. An axisymmetric shear flow is represented by a system of ring vortices and the axial variation of the stream lines due to the action of propeller is represented by a cubic function. The strengths of ring vortices, which are varying along the stream lines, are determined by the conservation of angular momentum. Two simplified effective velocity models are proposed to confirm the theory. Sample calculations using the simplified models are made to compare with the results by other investigators.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.66-72
• /
• 1994

For the reliable prediction of maneuverability of a ship, lots of captive model tests have been carried out for over 10 years. But the parameters appearing in the mathematical model are so versatile and showing complex characteristics, and it is still hard to establish the useful formulae that we can adopt directly in the design stage. In this paper, the most important parameters in the mathematical model. i.e.($1-\omega_P$) the effective wake fraction at propeller, and $\delta_R(\beta_R)$), the effective rudder inflow angles are investigated by the captive model tests at the circulating water channel. The model is tested at designed speed and at low speed, and the drafts at both full load and ballast load conditions are taken. Propeller thrusts and rudder normal forces are measured at the given drift angle and propeller revolution. These forces are used for the analysis of the effective flow velocity or flow direction, to the propeller or rudder.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.2
• /
• pp.13-22
• /
• 2008

The purpose of this study is to analyze the correlation between cause and the element of mouth odor through measurement and identification of mouth odor and is to apply to effective method for elimination of halitosis, Subjects were 150 people who visited Dong Pusan College and lived in Pusan Cross-sectional survey was used and mouth odor was measured by Oralchroma. Oral examination proceeded with status of tongue plaque distribution and calculus index, Statistical analysis was performed with SPSS version 13.0 for window Among 150 people, 67.3% subjects thought they had halitosis, 89.3% people felt that their mouth odor were the severest as soon as wake-up, Tongue was serious place for halitosis by 53.3% subjects Methylmercaptan and dimethyl sulfide showed the highest correlation by 0.549 index score, Moreover, methyl mercaptan was observed the correlation with brushing time in 0.190 index score and with food intake in 0.177(P<0.05). In conclusion, brushing time and food intake were correlated with mouth odor.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.377-387
• /
• 2010

In this study, the turbulent free surface around KVLCC1 employed in the circular motion test simulation is numerically calculated using a commercial CFD(Computational Fluid Dynamics) code, FLUENT. Also, hydrodynamic forces and yaw moments around a ship model are calculated during the steady turning. Numerical simulations of the turbulent flows with free surface around KVLCC1 have been carried out by use of RANS equation based on calculation of hydrodynamic forces and yaw moments exerted upon the ship hull. Wave elevation is simulated by using the VOF method. VOF method is known as one of the most effective numerical techniques handling two-fluid domains of different density simultaneously. Boundary layer thickness and wake field are changed various yaw velocities of ship model during the steady turning. The calculated hydrodynamic forces are compared with those obtained by model tests.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.160-168
• /
• 2017

In this study, we propose a method of optimal placement technique of artificial reef considering characteristics of sea areas and provide basic data for efficient budget execution. In addition, we will contribute to increasing the economic efficiency by improving the fisheries productivity by suggesting the scientific basis for the policy data and the increase of the catch through the resource creation based on the ecological information about the biology. Especially, in order to establish the effective disposition (optimum separation distance) of artificial reef considering characteristics of biological and engineering factors, it is necessary to review the artificial reef installation management regulations and investigate the biological effects of artificial reef facilities, is needed. Through this, it is expected that the ground data of the direction of the policy promotion will be derived by suggesting the placement condition of the artificial reef complex which can maximize the resource composition effect according to the target fish species.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.12-19
• /
• 2011

Drawing on its extensive experience with natural disasters, Japan has been dispatching Japan Disaster Relief (JDR) team to disaster-stricken countries to provide specialist assistance in rescue and medical operations. The JDR team has assisted in the wake of disasters including the 2004 Indian Ocean Earthquake and the 2008 Sichuan Earthquake in China. Information about the affected area is essential for a rapid disaster response. However, it can be difficult to gather information on damages in the immediate post-disaster period. To help overcome this problem, we have built on an Earthquake Damage Estimation System. This system makes it possible to produce distributions of the earthquake's seismic intensity and structural damage based on pre-calculated data such as landform and site amplification factors for Peak Ground Velocity, which are estimated from a Digital Elevation Model, as well as population distribution. The estimation result can be shared with the JDR team and with other international organizations through communications satellite or the Internet, enabling more effective rapid relief operations.

• Wind and Structures
• /
• v.20 no.2
• /
• pp.327-347
• /
• 2015

This paper investigates the effects of Reynolds number (Re) on the aerodynamic characteristics of a twin-deck bridge. A 1:36 scale sectional model of a twin girder bridge was tested using the Wall of Wind (WOW) open jet wind tunnel facility at Florida International University (FIU). Static tests were performed on the model, instrumented with pressure taps and load cells, at high wind speeds with Re ranging from $1.3{\times}10^6$ to $6.1{\times}10^6$ based on the section width. Results show that the section was almost insensitive to Re when pitched to negative angles of attack. However, mean and fluctuating pressure distributions changed noticeably for zero and positive wind angles of attack while testing at different Re regimes. The pressure results suggested that with the Re increase, a larger separation bubble formed on the bottom surface of the upstream girder accompanied with a narrower wake region. As a result, drag coefficient decreased mildly and negative lift coefficient increased. Flow modification due to the Re increase also helped in distributing forces more equally between the two girders. The bare deck section was found to be prone to vortex shedding with limited dependence on the Re. Based on the observations, vortex mitigation devices attached to the bottom surface were effective in inhibiting vortex shedding, particularly at lower Re regime.

• Wind and Structures
• /
• v.22 no.1
• /
• pp.17-41
• /
• 2016

To address the uncertainty of the flight trajectories caused by the turbulence and gustiness of the wind field over the roof and in the wake of a building, a 3-D probabilistic trajectory model of flat-type wind-borne debris is developed in this study. The core of this methodology is a 6 degree-of-freedom deterministic model, derived from the governing equations of motion of the debris, and a Monte Carlo simulation engine used to account for the uncertainty resulting from vertical and lateral gust wind velocity components. The influence of several parameters, including initial wind speed, time step, gust sampling frequency, number of Monte Carlo simulations, and the extreme gust factor, on the accuracy of the proposed model is examined. For the purpose of validation and calibration, the simulated results from the 3-D probabilistic trajectory model are compared against the available wind tunnel test data. Results show that the maximum relative error between the simulated and wind tunnel test results of the average longitudinal position is about 20%, implying that the probabilistic model provides a reliable and effective means to predict the 3-D flight of the plate-type wind-borne debris.