• 공업화학
• /
• 제26권4호
• /
• pp.495-504
• /
• 2015

본 연구에서는 충진층 플라즈마 반응기의 특성 및 에틸렌을 분해하는데 있어서 플라즈마 반응기의 직렬 및 병렬 배열에 따른 영향에 대해 조사하였다. 플라즈마 방전 개시 전의 반응기 유효 커패시턴스는 ${\gamma}$-알루미나 펠릿이 충진된 경우가 충진되지 않은 경우보다 컸으나, 일단 플라즈마 방전이 개시되고 나면 ${\gamma}$-알루미나 충진 여부와 관계없이 유효 커패시턴스가 유사하였다. 플라즈마 상태에서 생성되는 전자의 에너지는 전기장세기에 크게 의존하며, 0~20%(v/v) 범위의 산소농도(질소 : 80~100% (v/v))에서는 기체조성에 크게 영향을 받지 않는 것으로 나타났다. 플라즈마 상태에서 생성되는 여러 활성 성분들 중 바닥상태의 산소원자 및 오존이 산화 반응에 주로 관여하며, 전기장세기가 높아질수록 산소원자가 상대적으로 감소하는 대신 질소원자의 분율이 급격히 증가한다. 플라즈마 공정에서 전압, 방전 전력, 기체 유량, 체류시간 등 반응기의 성능에 영향을 주는 여러 가지 파라미터들이 있지만, 모든 파라미터들이 비에너지밀도 하나로 통합될 수 있음을 확인하였으며, 직렬 및 병렬로 연결된 반응기의 성능도 비에너지밀도만의 함수로 간주할 수 있으므로 반응기 설계 과정이 크게 단순화될 수 있다. 비에너지밀도의 함수로 나타낸 반응속도상수를 이용하여 계산한 결과도 실험데이터를 잘 예측할 수 있었다.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.236-241
• /
• 2017

Electrohydraulic forming is a high-speed forming process that deforms a blank using electric discharge in liquid. When high voltage is discharged in the water, a shock wave is propagated from the tip of the electrodes to the blank, causing the blank to be deformed into the die. Electrohydraulic forming has many advantages including improved formability and reduced bouncing effect and springback. The objective of this paper was to conduct a feasibility study to identify the electrohydraulic effect. An electrohydraulic forming apparatus was developed and experiments were carried out. The results of the experiment showed that the developed apparatus had sufficient energy to deform the blank into the die. Using the hole to emit residual air in the die was more effective than using the vacuum pump in terms of saving on experiment time.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.423-428
• /
• 1996

The feasibility study on burning Am-241, 243 and Cm-244 nuclides in a conventional PWR (Pressurized Water Reactor) was carried out by using the TRIFON code that was developed by the Institute of Theoretical and Experimental Physics in Russia in 1992. TRIFON code uses updated ABBN Russian nuclear cross section library. The reference reactor is the Korea nuclear power plant unit 8 (YGN 2). The burning effect of Am-241, 243 and Cm-244 nuclides was studied with UO$_2$(3.5 w/o)fuel assembly and MOX (4.44 w/o) fuel assembly. The loaded mass ratio of Am-241, 243 and Cm-244 nuclides was obtained from the mass ratio of Am-241, 243 and Cm-244 nuclides in 10 year cooling spent fuel with average discharge burnup of 33 GWD/MTU. The effective transmutation rates of Am-241, 243 and Cm-244 nuclides in UO$_2$ fuel assembly were found to be higher than those in MOX fuel assembly. The result from TRIFON code was compared to that from CASMO-3/NEM-3D code system. For more reliable calculation of transmutation for MA(Minor Actinides) more sophisticated decay chain scheme of MA should be investigated and nuclear cross section library of MA should be considerably improved.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1862-1868
• /
• 2010

A corona motor, as one of a powerful cooling means of microelectronic devices, has been employed because of its very simple structure of no coils and no brushes. In this paper, the effect of polarity of applied voltage and the number of blade corona electrodes on the fundamental properties of rotation of the motor was investigated. The I-V and rotation characteristics of the blade corona electrode were significantly different from the different polarities of applied voltages and the blade corona electrode numbers, due to the different space charge effect resulted by the different migration mobility of the positive and negative ions generated near the blade corona electrode tip of the rotor of the motor. The rotation speed of the motor was influenced significantly by the polarity of corona discharge, the number of blades, and mass of rotor. At the same corona current, an effective rotation can be obtained with the positive corona caused by the lower ion mobility. On the other hand, the higher rotation speed can be obtained with the negative corona resulted from its higher corona current. The highest rotation speed and energy efficiency can be obtained with the rotor having 4 blades.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.619-625
• /
• 2008

Urban sewer systems are designed to operate in open-channel flow regime and energy loss at square manholes is usually not significant. However, the energy loss at surcharged manholes is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharged flow. Hydraulic experimental apparatus which can change the manhole inner profile(CASE I, II, III, and IV) and the invert types(CASE A, B, C) were installed for this study. The experimental discharge was $16{\ell}/sec$. As the ratio of b/D(manhole width/inflow pipe diameter) increases, head loss coefficient increases due to strong horizontal swirl motion. The head loss coefficients for CASE I, II, III, and IV were 0.46, 0.38, 0.28 and 0.37, respectively. Side covers increase considerably drainage capacity at surcharged square manhole when the ratio of d/D(side cover diameter/inflow pipe diameter) was 1.0. The head loss coefficients for CASE A, B, and C were 0.45, 0.37, and 0.30, respectively. Accordingly, U-invert is the most effective for energy loss reduction at surcharged square manhole. This head loss coefficients could be available to evaluate the urban sewer system with surcharged flow.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.392.1-392.1
• /
• 2016

Nowadays, research interest in developing the wearable devices are growing remarkably. Portable consumer electronic systems are becoming lightweight, flexible and even wearable. In fact, wearable electronics require energy storage device with thin, foldable, stretchable and conformable properties. Accordingly, developing the flexible energy storage devices with desirable abilities has become the main focus of research area. Among various energy storage devices, supercapacitors have been considered as an attractive next generation energy storage device owing to their advantageous properties of high power density, rapid charge-discharge rate, long-cycle life and high safety. The energy being stored in pseudocapacitors is relatively higher compared to the electrochemical double-layer capacitors, which is due to the continuous redox reactions generated in the electrode materials of pseudocapacitors. Generally, transition metal oxides/hydroxide (such as $Co_3O_4$, $Ni(OH)_2$, $NiFe_2O_4$, $MnO_2$, $CoWO_4$, $NiWO_4$, etc.) with controlled nanostructures (NSs) are used as electrode materials to improve energy storage properties in pseudocapacitors. Therefore, different growth methods have been used to synthesize these NSs. Of various growth methods, electrochemical deposition is considered to be a simple and low-cost method to facilely integrate the various NSs on conductive electrodes. Herein, we synthesized amorphous $NiWO_4$ NSs on cost-effective conductive textiles by a facile electrochemical deposition. The as-grown amorphous $NiWO_4$ NSs served as a flexible and efficient electrode for energy storage applications.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.52-59
• /
• 2007

We investigated the effects of the addition of Mn and $AB_5$ type alloy on the electrochemical characteristics of Ti-Cr-V BCC type alloys as anode materials for Ni-MH battery. The activation behavior and discharge capacity of the BCC type alloys were significantly improved by ball-milling with the $LmNi_{4.1}Al_{0.25}Mn_{0.3}Co_{0.65}$ alloy, because the $AB_5$ type alloy acted as hydrogen path on the surface of the BCC type alloy. Among the Mn substituted alloys($Mn=0.03%{\sim}0.08%$), the $Ti_{0.32}Cr_{0.38}Mn_{0.05}V_{0.25}$ alloy ball-milled with $AB_5$ type alloy exhibited the greatest discharge capacity of $336\;mAh{\cdot}g^{-1}$. In addition, Mn substituted alloys exhibited the lower plateau pressure in P-C- T curve, the better hydrogen storage capacity and faster surface activation compared with the alloy without Mn.

• Elastomers and Composites
• /
• 제39권1호
• /
• pp.3-11
• /
• 2004

플라즈마 표면처리는 표면 관능기 표면 활성도 등을 증가시켜 촉매적 선택성, 염색성 및 다양한 소재의 접착력을 증가시켜주는데 큰 역할을 담당한다. 본 연구에서는 dielectric barrier discharge (DBD)를 이용한 상압 플라즈마 토치로 ethylene-vinyl acetate (EVA)의 표면을 처리하였다. 이때 사용된 가스는 아르곤, 공기, 및 산소를 이용하였으며, 표면처리에 따른 EVA의 표면 특성을 제타전위와 표면자유에너지를 이용하여 관찰하였다. 그 결과, 상압 플라즈마 표면처리에 따른 EVA의 표면 관능기는 접착 에너지 ($G_{IC}$)와 비례관계를 가지며 증가하는 것을 확인하였다. 특히, 상압 플라즈마 표면처리 공정은 EVA와 polyurethane (PU) 계면의 접착력을 크게 증가시켜 주는 것을 확인하였다.

• 동력기계공학회지
• /
• 제3권3호
• /
• pp.60-69
• /
• 1999

The noise and vibration sources of rotary compressor for room air-conditioner are pressure pulsation of compression process, cavity resonance of inner space, structural radiation noise of shell and impact noise of discharge valve. Among them, pressure pulsation is very important noise and vibration source. Because it transferred various kinds of noise and vibration like as mentioned above. In this reason, muffler and resonator are used in order to absorb and remove these noises. But an analytical prediction using acoustic analysis does not coincident with the experimental result. The difference between analysis and actual state is due to the assumption of analysis. This paper covered with new concept of muffler design based on the turbulence kinetic energy of flow by using CFD. From this analysis, it is possible to decide the best position of discharge port of muffler. Therefore $2{\sim}3dB$ noise reduction effect is acquired in rotary compressor of 5000 BTU grade. Also new approach of resonator design is suggested. From this study, the characteristics of resonator and surge hole (a kind of resonator without pipe length) are identified. The former is useful for pure tone noise (narrow frequency band), and the latter is effective for broad frequency band. This paper shows that it is very available to use 3 dimensional analysis of resonator in order to predict more exact tuning frequency. The result is proved by a lot of experiments. From combination of fluid analysis and acoustic analysis, up stream position is effective location of resonator concerning turbulence motion of fluid.

• 전자공학회논문지
• /
• 제54권4호
• /
• pp.108-112
• /
• 2017

고 휘도 방전 램프는 높은 광 효율이 요구되는 다양한 조명 환경에 많이 사용된다. 특히 메탈할라이드 램프용 조명 램프의 경우 램프 안정기의 크기는 매우 중요한 요소이며 작으면 작을수록 좋다. 메탈할라이드 램프용 전자식 안정기는 전자기식 안정기에 비하여 에너지 효율과 크기 그리고 조명기의 무게 등의 측면에서 성능이 우수하다. 본 논문에서는 DSP를 이용하여 고효율, 소형 및 경량화가 가능하고 비용이 절감되고 역률이 높은 전자식 안정기를 제시하였다. 제시한 전자식 안정기는 다이오드 정류기와 역률 보상 제어 부스트 컨버터 그리고 하프 브릿지 인버터로 구성하였고 역율 보상 알고리즘과 안정기 제어 알고리즘은 TI사의 TMS320LF2406 CPU를 사용하여 구현하였고 실험을 통해 제시한 안정기의 유용성과 타당성을 검증하였다.