• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.625-632
• /
• 2004

This study presents the NDE (non-destructive evaluation) technique for detecting the loosened bolts on joint steel structures on the basis of TOF (time of flight) and amplitudes of Lamb waves. Probabilistic neural network (PNN) technique which is an effective tool for pattern classification problem was applied to the damage estimation using PZT induced Lamb waves. Two kinds of damages were introduced by dominant damages (DD) which mean loosened bolts within the Lamb waves beam width and minor damages (MD) which mean loosened bolts out of the Lamb waves beam width. They were investigated for the establishment of the optimal decision boundaries which divide each damage class's region including the intact class. In this study, the applicability of the probabilistic neural networks was identified through the test results for the damage cases within and out of wave beam path. It has been found that the present methods are very efficient and reasonable in predicting the loosened bolts on the joint steel structures probabilistically.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.421-440
• /
• 2012

In this analytical study numerous prior experimental studies on reinforced concrete beam-to-column connections subjected to cyclic loading are investigated and a database of geometric properties, material strengths, configuration details and test results of subassemblies is established. Considering previous experimental research and employing statistical correlation method, parameters affecting joint shear capacity are determined. Afterwards, an equation to predict the joint shear strength is formed based on the most influential parameters. The developed equation includes parameters that take into account the effect of eccentricity, column axial load, wide beams and transverse beams on the seismic behavior of the beam-to-column connections, besides the key parameters such as concrete compressive strength, reinforcement yield strength, effective joint width and joint transverse reinforcement ratio.

• Earthquakes and Structures
• /
• 제4권4호
• /
• pp.429-449
• /
• 2013

Current Design Codes for Reinforced Concrete (RC) interior beam-column joints are based on limited experimental studies on the seismic behavior of eccentric joints. To supplement existing information, an experimental study was conducted that focused on the effect of eccentricity of the deeper beams with respect to the shallow beams. A total of eight one-third scale interior joints with beams of different depths were subjected to reverse cyclic loading. The primary variables in the test specimens were the amount of joint transverse reinforcement and the cross section of the shallow beams. The overall performance of each test assembly was found to be unsatisfactory in terms of joint shear strength, stiffness, energy dissipation and shear deformation. The results indicated that the vertical eccentricity of spandrel beams in this type of joint led to lower capacity in joint shear strength and severe damage of concrete in the joint core. Increasing the joint shear reinforcement was not effective to alter the failure mode from joint shear failure to beam yielding which is favorable for earthquake resistance design, whereas it was effective to reduce the crack width at the small loading stages. Based on the observed behavior, the shear stress of the joint core was suggested to be kept as low as possible for a safe and practical design of this type of joint.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.661-668
• /
• 2009

횡하중을 받는 포스트 텐션(PT) 플랫 플레이트 슬래브 골조의 해석은 일반적으로 유효보폭모델을 많이 사용한다. 횡 변위비와 불균형 모멘트을 예측하기 위한 유효보폭모델의 정확성은 PT 플랫 플레이트 슬래브의 유효강성을 어떻게 평가하느냐에 달려 있다. 슬래브 강성은 횡하중에 의한 작용모멘트의 증가와 함께 감소되기 때문에, 슬래브의 강성 감소현상은 플랫 플레이트 골조의 해석에 반영되어야 하며 균열의 영향 또한 고려되어야 한다. 횡하중을 받는 PT 플랫 플레이트 슬래브 구조의 정확한 해석을 위해 슬래브 강성감소는 유효보폭모델이 정확하게 되어야 한다. 이 목적을 위해 이 연구는 기존 연구자들에 의해 실시된 PT 플랫 플레이트 내부 및 외부 접합부의 실험 결과를 수집하였다. 그리고 이 연구는 시행착오를 통해 각 실험체의 횡강성에 유효보폭모델의 강성이 수렴하도록 슬래브의 폭을 감소시켰다. 슬래브의 모멘트 크기에 따라 비선형 회귀 분석을 수행함으로서 슬래브에 대한 강성감소계수 계산식을 제안하였다. 이 연구에서는 제안된 식의 정확성을 검증하기 위해서 PT 플랫 플레이트 골조의 실험 결과와 비교하였다. 제안된 식을 적용한 유효보폭모델은 작용하중의 크기에 따라 변화하여 PT 실험체의 실제 강성을 잘 예측하는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권3호
• /
• pp.149-158
• /
• 2004

본 연구는 유효전단스팬에 대한 깊이의 비가 1.0인 깊이가 큰 보에 대해서 유효전단영역내에 개구부에 대한 파괴 메카니즘의 변화와 전단파괴된 후 보수 보강에 따른 부재 내력의 복원력에 관한 연구로서, 그 결론는, 전단파괴한 유공보 시험체의 초기사균열 하중은 시험체 간에 큰 차이가 없어 시험체의 배근형태에 영향을 받지 않는 것으로 나타났으며, 아라미드 시트로 보강된 시험체의 균열 및 파괴형태는 중앙부의 휨 균열과 전단지간의 사균열이 동시에 발생한 후, 최대내력근처에서 유공측의 전단균열이 확대되어, 시트면의 중앙부위가 박리되면서 전단파괴 되었다. 전단파괴된 깊이가 큰 보 시험체를 아라미드 섬유시트로 보강한 결과 보강전과 비교하여 최대내력은 최소 34.4%, 최대 83.8%의 증가를 나타내어 파괴전의 내력을 복원하는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.73-78
• /
• 1992

It would be much effective that single column type pier is used in concrete slab bridges rather than gravity type pier is used. To determine the longitudinal bonging moment in concrete slab bridges supported by single column type piers, the concept of effective width is applied. By elastic plate theory cooperated with finite element method, the distribution of the longitudinal moment of the slab supported by single column type piers is studied. The main variables are span, width, and thickness of the slab and column section size. Then the analytical results obtained are summarized and analysed to evaluate the maximum longitudinal negative moment by simple beam analysis.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.6329-6335
• /
• 2014

스트럿-타이 모델에서 절점 폭은 해석과 설계에서 중요하다. 그것은 트러스 유사 시스템에서 힘의 분포에 영향을 준다. 또한, 설계 코드를 만족시키기 위한 모든 스트럿 및 절점의 검증에도 영향을 미친다. 여기서 코드는 ACI-318 코드를 의미한다. 절점 폭을 결정하는 4가지 방법이 있다. 즉 1)유효 깊이를 보 높이의 0.9배로 가정하는 방법 2)모멘트 평형을 이용하는 방법 3)절점 폭을 380mm로 가정하는 방법 그리고 4)본 연구에서 제안된 방법이다. 106개의 파라미터 연구를 분석하였다. 그 결과 필요로 하는 총 강재량이 4가지 방법 모두 크게 차이가 나지 않기 때문에 가장 쉬운 방법으로 선택하는 것이 시간 절약 측면에서 좋을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.319-324
• /
• 1995

Strengthening a damaged structure by bonding steel plate on the surface of cracked structural members have been widely accepted for strengthening the structural components Recently, however, caron fiber sheets have been developed in order to achive more effective way of strengthening damaged structures due to their superior material properties to those of conventionally used steel plates in terms of their lighter unit weight and higher tensile strength. It has been reported that when both methods are applied to a damaged beam element, flexural strength and its stiffness of a beam increase and the rate of crack development as well as crack width and edflection under service loads are reduced, In this study some experiments are performed in order to comparetively observe the structural properties of the damaged beams which are either strengthened with different lengths of steel plates or with carbon sheets on the crack propagation, failure mechanisms, and load-deflection charateristics under the fatigue loadings.

• Steel and Composite Structures
• /
• 제9권5호
• /
• pp.419-444
• /
• 2009

Flange and web local buckling in beam plastic hinge regions of steel moment frames can prevent beam-column connections from achieving adequate plastic rotations under earthquake-induced forces. Reducing the flange-web slenderness ratios (FSR/WSR) of beams is the most effective way in mitigating local member buckling as stipulated in the latest seismic design specifications. However, existing steel moment frame buildings with beams that lack the adequate slenderness ratios set forth for new buildings are vulnerable to local member buckling and thereby system-wise instability prior to reaching the required plastic rotation capacities specified for new buildings. This paper presents results from a research study investigating the cyclic behavior of steel I-beams modified by a welded haunch at the bottom flange and reinforced with glass fiber reinforced polymers at the plastic hinge region. Cantilever I-sections with a triangular haunch at the bottom flange and flange slenderness ratios higher then those stipulated in current design specifications were analyzed under reversed cyclic loading. Beam sections with different depth/width and flange/web slenderness ratios (FSR/WSR) were considered. The effect of GFRP thickness, width, and length on stabilizing plastic local buckling was investigated. The FEA results revealed that the contribution of GFRP strips to mitigation of local buckling increases with increasing depth/width ratio and decreasing FSR and WSR. Provided that the interfacial shear strength of the steel/GFRP bond surface is at least 15 MPa, GFRP reinforcement can enable deep beams with FSR of 8-9 and WSR below 55 to maintain plastic rotations in the order of 0.02 radians without experiencing any local buckling.