• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.43.3-43.3
• /
• 2016

We present a library of high-resolution (R~45,000) and high signal-to-noise ratio ($S/N{\geq}200$) near-infrared spectra of 147 standard stars. High quality spectra were obtained with Immersion GRating INfrared Spectrograph (IGRINS) covering the full range of H ($1.496-1.795{\mu}m$) and K ($2.080-2.460{\mu}m$) bands. The targets are mainly selected as MK standard stars which have well-defined spectral types and luminosity classes, and cover a wide range of effective temperatures and surface gravities. The spectra were corrected for telluric absorption lines and absolute flux calibrated using Two Micron All Sky Survey (2MASS) photometry. We find new spectral indices in H and K bands and provide their EWs. We describe empirical relations between the measured EWs and stellar atmosphere parameters such as effective temperature and surface gravity.

• 보존과학연구
• /
• s.27
• /
• pp.145-163
• /
• 2006

This study is to be investigated through firing experiment in studio in order to reveal a physical properties of celadon according to change firing temperature. The results can be briefly summarized as below; Firstly, in measurement of color chromaticity, samples of first firing in body were effective in differentiating of changed color in samples from each other but there of second firing were not. The color of the glaze was more effective change than that of the body. Secondly, bulk density of body was increased with temperature and it was attained highest point in $1200^{\circ}C$ Additionally, water absorption ratio was most rapidly changed between $1000^{\circ}C$ and $1200^{\circ}C$Thirdly, in the microstructural analysis, body of samples in first firing have not specific characteristics in the changed patterns of microstructure. body and glaze of samples in second firing have many that. Consequently, we knew that this experiment can be provided researcher with physical properties and firing mechanisms of celadon.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.61-78
• /
• 1988

This study was carried out to clarify the effect of dietary calcium, casein and suet on intestinal absorption of cadmium in mice. It was performed for 30 days, from April 11, to May 10, 1988. Ninety mice were devided into 4 experimental groups and control group with 6 mice each dietary group, and measured survival ratio, body weight and weight ratio of organ to body. The contents of cadmium in liver, kidney, spleen, muscle and skin with hair, and feces were analyzed by atomic absorption spectrophotometer after sacrifice by anesthesia. The ratio of survival after 30 day breeding was $100\%$ in control group, but $66.7\%$ in group IV(basal diet + Cd + Ca) with $100{\mu}g$ one dose and with 50ppm cadmium containing fluid free-intake, and group V (basal diet + Cd + suet) with free-intake of 50ppm containing cadmium fluid. The ratio of body weight gains in cases of single dose $100{\mu}g$ of cadmium was highest as $42.3\%$ in group IV and lowest as $26.0\%$ in group V, in cases of free-intake of 50ppm containing cadmium fluid was highest as $24.0\%$ in group IV and lowest as $11.6\%$ in group II (basal diet + Cd). The body weight, in the case of single dose of $100{\mu}g$ of cadmium showed no increase untill 5th day from acute poisoning. While in case of free-intake of 50ppm containing cadmium, it showed very slight increase through all breeding period. The weight ratio of organ to body were lowest in liver of group II in both occasions. The most of cadmium administered was excreated in feces within 2 days after single dose $100{\mu}g$ cadmium. The contents of cadmium in all tissues were significantly high in each group comparing to control group as liver, kidney, spleen and muscle of group II which showed the highest level in both occasions of $100{\mu}g$ one dose and free-intake of 50ppm containing cadmium fluid, and higher in group II of the occasion with $100{\mu}g$ single dose, and in group V of the occasion of 50ppm containing cadmium fluid free-inatke for skin with hair. And the content of cadmium in tissues is generally higher in the occasion of 50ppm containing cadmium free-intake than $100{\mu}g$ single dose. From the above results I conclude that the addition of casein, calcium and suet in cadmium containing diet is effective to inhibtion of intestinal absorption of cadmium by particularly, calcium.

• Journal of Nutrition and Health
• /
• v.17 no.1
• /
• pp.20-30
• /
• 1984

This experiment was designed to investigate the effects of the mixing ratio of soyprotein and casein, and the level of pectin combined with the mixture on lipid metabolism in rats. Forty-eight male weanling rats of Wistar strain weighing 58.8\;{\pm}\;1.9g$ were divided into six groups by completely randomized block design and fed 10% protein diet for four weeks. Two types of protein mixtures (casein to soyprotein mixing ratio of 1 : 3 and 2: 1)combined with 0.5% , 3%, and 5% of pectin were employed for experimental diets. The results obtained in the study are summarized as follows ; 1) Feed efficiency ratio and protein efficiency ratio were not significantly different among six groups for the whole experimental period, but those for high casein-low pectin group were significantly higher than the ones for high soy-high pectin group at 4th week of the experimental period. 2) Gross fecal dried weight and fecal lipid excretion were higher in high pectin groups of both protein combinations. Therefore, the apparent fat digestibility and absorption appeared to be significantly low in high pectin groups. 3) Pectin was effective in lowering serum lipid and cholesterol levels in high casein groups, but no effect of pectin was noted in high soyprotein groups. 4) Lipid and cholesterol contents of the liver were higher in high soy-low pectin group than the others. And no marked differences in lipid and cholesterol contents in the kidney and carcass were observed.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.53-63
• /
• 2008

In this study, the reverberation characteristics of coupled spaces were investigated using a scale model. Two rooms were connected through an acoustically transparent opening known as an aperture. The acoustic characteristics of the coupled room by varying three parameters, the aperture opening size, the absorption ratio between the two rooms and the locations of the secondary room, were measured and analysed. The results indicated that a reverberant secondary room, produced large variations of the acoustics in the main room and an absorptive secondary room was effective to provide systematic control of the acoustics in the main room. The reverberant secondary room should be located at the rear of the stage and the aperture opening ratio over 6.25% produced large variations of the acoustics in the main room. However, the aperture opening ratio over 25% had no effect on variations of the acoustics in the main room. The absorptive secondary room should be located at the rear of the audience areas and the aperture opening ratio over 3.13% produced large variations of the acoustics in the main room.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.488-494
• /
• 2009

Zeolite 4A was prepared by new synthesis method, 2-step crystallization, for enhancement of oil absorption capacity. Vietnamese sand and $NaAlO_2$ solution from natural bauxite were used as raw materials in stead of conventional cullet and $Al(OH)_3$ to reduced the processing cost. Some dissolved organics in $NaAlO_2$ solution were removed by activated carbon. Synthetic method was progressed by 1) reacting the raw materials at $55^{\circ}C$, 4 hr with the ratio of Si/Al to 1.15, and 2) reacting at $65^{\circ}C$, 5 hr with reducing the ratio of Si/Al to 0.98. New method can easily control the particle size, aggregation, surface polarity, and enhanced the whiteness of the products. The prepared zeolite 4A shows excellent oil absorption capacity(O.A.C>50 ml/100 g) as well as equal value with calcium ion exchange capacity, and proves the 2-step crystallization is the economic and effective process for the preparation of zeolite 4A.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.76-83
• /
• 2012

In this study, the research examined the effect on FC, WG, RP replacement ratio on the quality improvement of BS mortar using the RA. First of all, the flow value increased as the FC contents increased, and decreased as the WG and RP contents increased. The air contents was reduced as the FC and RP contents increased, but was increased as the WG contents went up While the compressive strength of 1 : 7 mix proportion increased with the increase of the FC and WG contents, it decreased as there was more RP contents. The compressive strength of RP could increase as the mix proportion increased, but the difference depending on the improvement material type and replacement ratio decreased gradually. The absorption deteriorated as the FC and RP contents increased in all the mix proportions, but improved a little when WG was used. Meanwhile, the absorption decreased as the compressive strength improved in all the mix proportions as a correlation, but the order was FC, RP and WG depending on the quality improvement material types. The FC and WG were most favorable in terms of quality improvement as a total analysis, and the RP and WG was most effective in terms of economical efficiency and resource recycling.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.95-100
• /
• 1985

Effects of number of washings with solvents on drying rates and physicochemical properties of dried soymilk residues(SMR) were investigated. The dried soymilk residue was prepared by washing the residue with acetone or ethanol, followed by drying at $60^{\circ}C$. Increase of number of washings with a residue/solvent ratio of 1/1.5 resulted in an increase in drying rate and in protein content of the residue while the lipid content decreased. The brightness of the dried residue and the properties of water and oil absorption were also improved by washing with acetone which was advantageous to ethanol for all of the properties measured. Washings more than 3 times with acetone or 2 times with ethanol were found to be less effective in terms of quality improvement. The more addition of dried residue into the mixture of SMR-wheat flour resulted in a linear increase of water and oil absorption characteristics.

• Archives of Pharmacal Research
• /
• v.28 no.8
• /
• pp.970-976
• /
• 2005

The purpose of this study was to investigate the effect of morin, a flavonoid, on the pharmacokinetics of diltiazem and one of its metabolites, desacetyldiltiazem in rats. Pharmacokinetic parameters of diltiazem and desacetyldiltiazem were determined after oral administration of diltiazem (15 mg/kg) in rats pretreated with morin (1.5, 7.5, and 15 mg/kg). Compared with the control group (given diltiazem alone), pretreatment of morin significantly increased the absorption rate constant $(K_a)$ and peak concentration $(C_{max})$ of diltiazem (p<0.05, p<0.01). Area under the plasma concentration-time curve (AUC) of diltiazem in rats pretreated with morin were significantly higher than that in the control group (p<0.05, p<0.01), hence the absolute bioavailability $(AB\%)$ of diltiazem was significantly higher than that of the control group (p<0.05, p<0.01). Relative bioavailability $(RB\%)$ of diltiazem in rats pretreated with morin was increased by 1.36- to 2.03-fold. The terminal half-life $(t_{1/2})$ and time to reach the peak concentration $(T_{max})$ of diltiazem were not altered significantly with morin pretreatment. AUC of desacetyldiltiazem was increased significantly (p<0.05) in rats pretreated with morin at doses of 7.5 and 15 mg/kg, but metabolite-parent ratio (MR) of desacetyldiltiazem was decreased significantly (p<0.05), implying that pretreatment of morin could be effective to inhibit the CYP 3A4-mediated metabolism of diltiazem. There were no apparent changes of $T_{max}$ and $t_{1/2}$ of desacetyldiltiazem with morin pretreatment. Collectively, the pretreatment of morin significantly altered pharmacokinetics of diltiazem, which can be attributed to increased intestinal absorption as well as reduced first-pass metabolism. Based on these results, dose modification should be taken into consideration when diltiazem is used concomitantly with morin or morin-containing dietary supplements in clinical setting.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.57-60
• /
• 2004

Recently. as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust af the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. The present study purposed to analyze the physical and dynamic characteristics of woody cement boards, which were made by modifying water-cement ratio for each wood inclusion rate based on a hardening-accelerator inclusion rate set in previous studies and, based on the findings. to provide basic data about the physical properties of inorganic boards made of waste wood, in order to Produce woody cement boards using waste wood, which has problems in being used in the manufacturing of woody cement boards.