• 제목/요약/키워드: Effective Supply

검색결과 1,617건 처리시간 0.027초

A Framework of Managing Supply Chain Disruption Risks Using Network Reliability

  • Ohmori, Shunichi;Yoshimoto, Kazuho
    • Industrial Engineering and Management Systems
    • /
    • 제12권2호
    • /
    • pp.103-111
    • /
    • 2013
  • This paper discusses how to manage supply chain disruption risks from natural disasters or other low-likelihood-high-impact risk drivers. After the catastrophic earthquake in Eastern Japan and the severe flood in Thailand, most companies have been attempting to re-establish the business continuity plan to prevent their supply chain from disruption. However, the challenges for managers and individual risks are often interrelated, and thus, actions that mitigate one risk can end up being no contribution as a whole. In this paper, we describe a framework for assessing how much impact individual mitigation strategies have on the entire supply chain protection against disruption, using network reliability. We propose three categories of risk-mitigation approaches: Stabilization, Absorption, and Duplication. We analyze the situation under which each of these strategies is the best suitable. With a clear understanding of relations between these mitigation strategies and the entire supply chain risks, managers can select effective risk-reduction approaches to their supply chain.

경제사상의 변화 (공급측면 경제학의 시험) (The changes of economic though (The trial of supply-side economics))

  • 서홍석
    • 한국관광식음료학회지:관광식음료경영연구
    • /
    • 제8권
    • /
    • pp.89-121
    • /
    • 1997
  • Many of the measures and policies advocated by supply-siders, such as lower taxation, less government intervention, more freedom from restrictive legislation and regulation, and the need for increased productivity can be found in writing the classical economist. Nor is supply-side economics a complete divorcement from Keynesian analysis. In both camps the objectives are the same-high level employment, stable prices and healthy economic growth, the means or suggestions for attaining the objectives, however, differ. Consequently, recommended economic policies and measures are different. keynesians rely primarily on the manipulation of effective demand to increase output and employment and to combat inflation. They assume ample resources to be available in order that supply will respond to demand. The supply-siders emphasize the need to increase savings, investment, productivity and output as a means of increasing income. Supply-siders assume that the increase in income will lead to an increase in effective demand. Keynesians suggest that savings, particularly those not invested, dampen economic activity. Supply-siders hold that savings, or at least an increase in after-tax income, stimulates work effort and provides funds for investment. Perhaps keynesians are guilty of assuming that most savings are not going to be invested, whereas supply-siders may erroneously assume that almost all savings will flow into investment and/ or stimulate work effort. In reality, a middle ground is possible. The supply-siders stress the need to increase supply, but Keynes did not preclude the possibility of increasing economic activity by working through the supply side. According to Keynes' aggregate demand-aggregate supply framework, a decrease in supply will increase output and employment. It must be remembered, however, that Keynes' aggregate supply is really a price. Lowering the price or cost of supply would there by result in higher profit and/ or higher output. This coincides with the viewpoint of supply-siders who want to lower the cost of production via various means for the purpose of increasing supply. Then, too, some of the means, such as tax cuts, tax credits and accelerated depreciation, recommended by suply-siders to increase productivity and output would be favored by Keynesians also as a means of increasing investment, curbing costs, and increasing effective demand. In fact, these very measures were used in the early 1960s in the United State during the years when nagging unemployment was plaguing the economy. Keynesians disagree with the supply-siders' proposals to reduce transfer payments and slow down the process of income redistribution, except in full employment inflationary periods. Keynesians likewise disagree with tax measures that favored business as opposed to individuals and the notion of shifting the base of personal taxation away from income and toward spending. A frequent criticism levied at supply-side economics is that it lacks adequate models and thus far has not been quantified to any great extent. But, it should be remembered that Keynesian economics originally was lacking in models and based on a number of unproved assumptions, such as, the stability of the consumption function with its declining marginal propensity to consume. Just as the economic catastrophe of the great depression of the 1930s paved the way for the application of Keynesian or demand-side policies, perhaps the frustrating and restless conditions of the 1970s and 1980s is an open invitation for the application of supply-side policies. If so, the 1980s and 1990s may prove to be the testing era for the supply-side theories. By the end of 1990s we should have better supply-side models and know much more about the effectiveness of supply-side policies. By that time, also, supply-side thinking may be more crystallized and we will learn whether it is something temporary that will fade away, be widely accepted as the new economics replacing Keynesian demand analysis, or something to be continued but melded or fused with demand management.

  • PDF

소매점 공급사슬에서 소매점주도와 공급자주도 재고정책에 대한 비교 연구 (A Comparison Study on Retailer-managed and Vendor-managed Inventory Policies in the Retail Supply Chain)

  • 홍성철;박양병
    • 대한산업공학회지
    • /
    • 제32권4호
    • /
    • pp.382-392
    • /
    • 2006
  • Vendor-managed inventory policy(VMIP) is a supply-chain initiative where the supplier is authorized to manage inventories of items at retail locations. In VMIP, the supplier monitors sales and stock information at retail locations and makes decisions of inventory replenishment and transportation simultaneously. VMIP has been known as an effective supply chain strategy that can realize many of benefits obtainable only in a fully integrated supply chain. However, VMIP does not always lead to lower the supply chain cost. It sometimes generates the total supply chain cost higher than the traditional retailer-managed inventory policy (RMIP). In this paper, we perform a comparison study on RMIP and VMIP in the retail supply chain which consists of a single supplier and a number of retailers. We formulate mixed integer programming models for both RMIP and VMIP with vehicle routing problems and perform computational experiments on various test problems. Furthermore, we derive the conditions which guarantee the dominant position for VMIP with respect to total supply chain cost in the simple retail supply chain.

Effect of Supply and Return Locations of a Floor-Supply Cooling System on Thermal Comfort

  • Kim, Young-Il;Kim, Jo-Seph;Yoo, Ho-Seon
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제9권4호
    • /
    • pp.37-46
    • /
    • 2001
  • This study numerically investigates thermal comfort of a space cooled by a floor-supply air-conditioning system, in which three different combinations of supply and return locations, one floor-supply/ceiling-return and two floor-supply/floor-return, are treated. A complementary experiment is performed to validate the present numerical analysis, and the prediction agrees favorably with the measured data. In the numerical procedure, a simplified model mimicking the inlet flow through a diffuser is developed for efficient simulations. The calculated results show that the ceiling-return type is far better in terms of thermal comfort than the floor-return ones within the extent of this study, which seems to be caused by effective vertical penetration of the supply air against natural convection. It is also revealed that the arrangement of port locations in the floor-supply/floor-return system has insignificant effect on the cooling performance. For selecting a proper system, other characteristics including the heating performance should be accounted for simultaneously with the present considerations.

  • PDF

외기온도와 환수온도를 이용한 보일러의 공급수온도설정 (Boiler Supply Water Temperature Setting by Outside Air Temperature and Return Water Temperature)

  • 한도영;유병강
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.161-166
    • /
    • 2009
  • Condensing gas boiler units may make a big role for the reduction of energy consumption in heating industries. In order to decrease the energy consumption of a boiler unit, the effective operation is necessary. In this study, the supply water temperature algorithm of a condensing gas boiler was developed. This includes the setpoint algorithm and the control algorithm of the supply water temperature. The setpoint algorithm was developed by the fuzzy logic and the control algorithm was developed by the proportional integral algorithm. In order to analyse the performance of the supply water temperature algorithm, the dynamic model of a condensing gas boiler system was used. Simulation results showed that the supply water temperature algorithm developed for this study may be practically applied for the control of the condensing gas boiler.

  • PDF

유전자알고리즘 및 발견적 방법을 이용한 차량운송경로계획 모델 (Integrated Vehicle Routing Model for Multi-Supply Centers Based on Genetic Algorithm)

  • 황흥석
    • 한국시뮬레이션학회논문지
    • /
    • 제9권3호
    • /
    • pp.91-102
    • /
    • 2000
  • The distribution routing problem is one of the important problems in distribution and supply center management. This research is concerned with an integrated distribution routing problem for multi-supply centers based on improved genetic algorithm and GUI-type programming. In this research, we used a three-step approach; in step 1 a sector clustering model is developed to transfer the multi-supply center problem to single supply center problems which are more easy to be solved, in step 2 we developed a vehicle routing model with time and vehicle capacity constraints and in step 3, we developed a GA-TSP model which can improve the vehicle routing schedules by simulation. For the computational purpose, we developed a GUI-type computer program according to the proposed methods and the sample outputs show that the proposed method is very effective on a set of standard test problems, and it could be potentially useful in solving the distribution routing problems in multi-supply center problem.

  • PDF

생산 능력 제한이 존재하는 다단계 공급망을 위한 Look-ahead 기반의 분배계획 (Look-ahead Based Distribution Planning for Capacitated Multi-stage Supply Chains)

  • 노주석;권익현;김성식
    • 대한안전경영과학회지
    • /
    • 제8권5호
    • /
    • pp.139-150
    • /
    • 2006
  • The aim of this study is to establish an efficient distribution planning for a capacitated multi-stage supply chain. We assume that the demand information during planning horizon is given a deterministic form using a certain forecasting method. Under such a condition, we present a cost effective heuristic method for minimizing chain-wide supply chain inventory cost that is the sum of holding and backorder costs by using look-ahead technique. We cope with the capacity restriction constraints through look-ahead technique that considers not only the current demand information but also future demand information. To evaluate performance of the proposed heuristic method, we compared it with the extant research that utilizes echelon stock concept, under various supply chain settings.

Lean SCM에서의 모듈생산의 적용에 따른 모델개발과 원가분석 (The Development of Model and Cost Analysis to the Application of Modular Production System in Lean Supply Chain Management)

  • 김태호;양광모;권정휘;강경식
    • 대한안전경영과학회지
    • /
    • 제4권4호
    • /
    • pp.73-85
    • /
    • 2002
  • The supply chain not only includes the manufacturer and suppliers, but also transporters, warehouses, retailers, and customers themselves. Within each organization, such as manufacturer, the supply chain includes all functions involved in filling a customer request. these functions include, but are not limited to, new product development, marketing, operation, distribution, finance, and customer service. Lean Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is development of model and cost analysis to the modular production system in Lean SCM. Introduction of modular production system in Lean SCM is effective in reducing the cost in processing, manufacturing, inventory holding, ordering, etc.

공급체인 관리하에서 효율적인 협력업체 선정 및 평가구조 분석에 관한 연구 (A Study on Selection of Effective Supplier and Analysis of Evaluation Structure in Supply Chain Management)

  • 김진호;이병기
    • 산업공학
    • /
    • 제17권2호
    • /
    • pp.169-179
    • /
    • 2004
  • In supply chain management, supplier capacity is very important to meet the customer demand quickly. This paper studies a supplier evaluation structure and then suggests a methodology using fuzzy theory for selecting an effective supplier. Several quantitative and qualitative evaluation factors should be analyzed in the evaluation structure. The qualitative factors includes not only product and service qualities but financial condition. The methodology deals with both the quantitative and qualitative factors together through fuzzy inference. A case study is also presented to show how to choose the best one among potential suppliers.

효과적 산학연계교육을 위한 공급망품질경영에 관한 실증적 조사연구 (An Empirical Study on the Supply Chain Quality Management for Effective University-Industry linked Training Programs)

  • 김상필;이문수
    • 한국실천공학교육학회논문지
    • /
    • 제2권2호
    • /
    • pp.105-112
    • /
    • 2010
  • 효과적이고 효율적인 산/학연계교육을 위해서는 기존의 대기업 주도의 일방적 교육시스템이나 교육과정에서 벋어나 공급망 상에서 연결된 대기업-중소기업 간 상생협력관계에 따른 차별화된 맞춤형 산학교육계획의 설계가 필수적이고 이를 위해서 공급망상에서 연결된 대기업-중소기업의 협력관계를 평가할 수 있는 공급망품질을 평가하는 것이 중요한 문제이다. 따라서 본 논문에서는 효과적이고 효율적인 산/학연계교육 설계 및 수행을 위해 중요한 요인인 공급망품질경영모형 SCQM(Supply Chain Quality Management) 및 이를 바탕으로 상생품질경영 역량을 평가할 수 있는 공급망품질협력지수(QCI-SCM; Quality Collaboration Index for Supply Chain Management)를 제시하고, 심사항목별, 매출규모별로 나누어진 기업군을 대상으로 상생협력도 실증분석을 통해 그 차이점과 공통점을 파악함으로써 상생협력성과에 영향을 미치는 핵심요소가 무엇인지를 제시하고 이를 효과적인 산학연계 교육에 활용할 수 있는 가능성을 살펴 보고하고자 한다.

  • PDF