• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.26-31
• /
• 2016

Toxoplasmosis is an important cause of foodborne, inflammatory illnesses, as well as congenital abnormalities. Currently available therapies are ineffective for persistent chronic disease and congenital toxoplasmosis or have severe side effects which may result in life-threatening complications. There is an urgent need for safe and effective therapies to eliminate or treat this cosmopolitan infectious disease. The aim of this study was to investigate the in vitro anti-Toxoplasma activities of Plantago asiatica L., one of the herbal extracts, using tachyzoit of T. gondii RH strain infected HeLa cells. As the results, the selectivity of Plantago asiatica L. extract was 4.5, which was higher than Sulfadiazine selectivity (0.4). Also, we perfomed the cell proliferation inhibition test and the morphological study to evaluate the anti-T. gondii activity of Plantago asiatica L. extract with HeLa cells. As the results, the inhibition rate of the Plantago asiatica L. extract was high inhibition rate. This indicates that the Plantago asiatica L. extract may be used for new anti-T. gondii agent.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.736-741
• /
• 2014

This study developed probabilistic models to determine the initiation time of growth of Pseudomonas spp. in combinations with $NaNO_2$ and NaCl concentrations during storage at different temperatures. The combination of 8 NaCl concentrations (0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, and 1.75%) and 9 $NaNO_2$ concentrations (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm) were prepared in a nutrient broth. The medium was placed in the wells of 96-well microtiter plates, followed by inoculation of a five-strain mixture of Pseudomonas in each well. All microtiter plates were incubated at 4, 7, 10, 12, and $15^{\circ}C$ for 528, 504, 504, 360 and 144 h, respectively. Growth (growth initiation; GI) or no growth was then determined by turbidity every 24 h. These growth response data were analyzed by a logistic regression to produce growth/no growth interface of Pseudomonas spp. and to calculate GI time. NaCl and $NaNO_2$ were significantly effective (p<0.05) on inhibiting Pseudomonas spp. growth when stored at $4-12^{\circ}C$. The developed model showed that at lower NaCl concentration, higher $NaNO_2$ level was required to inhibit Pseudomonas growth at $4-12^{\circ}C$. However, at $15^{\circ}C$, there was no significant effect of NaCl and $NaNO_2$. The model overestimated GI times by $58.2{\pm}17.5$ to $79.4{\pm}11%$. These results indicate that the probabilistic models developed in this study should be useful in calculating the GI times of Pseudomonas spp. in combination with NaCl and $NaNO_2$ concentrations, considering the over-prediction percentage.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.771-775
• /
• 1997

Treatment with electron beam irradiation was investigated for the elimination of Escherichia coli O157:H7 which has been linked to outbreaks of foodborne illness on undercooked and raw meat. Before treatment, the maximum populations were observed at 16 hr when E. coli O157:H7 was incubated in TSB at $37^{\circ}C$. Incubation at $4^{\circ}C$ did not influence survival and growth of the strain. The numbers of E. coli O157:H7 were present about $10^{7}\;CFU/mL$ in the log $(6\;hr\;at\;37^{\circ}C)$ and stationary phase $(16\;hr\;at\;37^{\circ}C)$ of cells, respectively. Freezing $(24\;hr\;at\;-18^{\circ})$ had a more marked lethal effect. The $D_{10}$ value at $-18^{\circ}C$ of E. coli O157:H7 contaminated in frozen beef was 0.45 kGy, and inactivation factor were $6.67{\sim}11.11$ at the radiation doses of $3{\sim}5\;kGy$. Therefore, electron beam irradiation was an effective method to eleminate of E. coli O157:H7.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.1005-1011
• /
• 2005

Widespread distributions of repetitive DNA elements in bacteria genomes are useful for analysis of genomes and should be exploited to differentiate food-borne pathogenic bacteria among and within species. Enterobacterial repetitive intergenic consensus (ERIC) sequence has been used for ERIC-PCR genomic fingerprinting to identify and differentiate bacterial strains from various environmental sources. ERIC-PCH genomic fingerprinting was applied to detect and differentiate four major Gram-negative food-borne bacterial pathogens, Esherichia coli, Salmonella, Shigella, and Vibrio. Target DNA fragments of pathogens were amplified by ERIC-PCR reactions. Dendrograms of subsequent PCR fingerprinting patterns for each strain were constructed, through which relative similarity coefficients or genetic distances between different strains were obtained numerically. Numerical comparisons revealed ERIC-PCR genotyping is effective for differentiation of strains among and within species of food-borne bacterial pathogens, showing ERIC-PCR fingerprinting methods can be utilized to differentiate isolates from outbreak and to determine their clonal relationships among outbreaks.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.225-236
• /
• 2013

Among several bacteria examined, an antibacterial-producing Lactobacillus strain with probiotic characteristics was selected and identified based on 16S rRNA gene sequencing. Subsequent purification and mode of action of the antibacterial compounds on target cells including E. coli were investigated. Maximum production of the antibacterial compound was recorded at 18 h incubation at $30^{\circ}C$. Interestingly, antibacterial activity remained unchanged after heating at $121^{\circ}C$ for 45 min, 24 h storage in temperature range of $70^{\circ}C$ to room temperature, and 15 min exposure to UV light, and it was stable in the pH of range 2-10. The active compounds were inactivated by proteolytic enzymes, indicating their proteinaceous nature, and, therefore, referred to as bacteriocin-like inhibitory substances. Isolation and partial purification of the effective agent was done by performing ammonium sulfate precipitation and gel filtration chromatography. The molecular mass of the GFC-purified active compound (~3 kDa) was determined by Tris-Tricine SDS-PAGE. To predict the mechanisms of action, transmission electron microscopy (TEM) analysis of ultrathin sections of E. coli before and after antibacterial treatment was carried out. TEM analysis of antibacterial compounds-treated E. coli demonstrated that the completely altered bacteria appear much darker compared with the less altered bacteria, suggesting a change in the cytoplasmic composition. There were also some membrane-bound convoluted structures visible within the completely altered bacteria, which could be attributed to the response of the E. coli to the treatment with the antibacterial compound. According to the in vivo experiments oral administration of L. plantarum HKN01 resulted in recovery of infected BALB/c mice with Salmonella enterica ser. Typhimurium.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.67-67
• /
• 2018

Trichoderma species are a rich source of metabolites, but less known for biomedical potential. This work deals with antibacterial and antioxidant potentials of intracellular non-cytotoxic metabolites, extracted from Trichoderma atroviride (KNUP001). A total of 53 fractions was collected by column chromatography and tested for cytotoxicity by MTT assay. Only one fraction (F41) was found to be non-toxic to Vero cells with $95.4{\pm}0.61%$ of survival. The F41 was then subjected to chemical analysis, antibacterial and antioxidant assays. The F41 at $500{\mu}g.ml^{-1}$ showed the total antioxidant of $48.70{\pm}2.90%$, DPPH radical scavenging activity of $37.25{\pm}2.25$, nitric oxide (NO) radical scavenging activity of $54.55{\pm}1.95$ and $H_2O_2$ radical scavenging activity of $43.75{\pm}3.21$. The F41 at $25{\mu}g.ml^{-1}$ displayed antibacterial activity against E. coli ($14.25{\pm}0.2mm$), P. mirabilis ($10.4{\pm}0.6mm$), S. dysenteriae ($18.6{\pm}03mm$), S. paratyphi A ($14.1{\pm}1.1mm$), E. aerogenes ($5.6{\pm}0.4mm$) and S. marcescens ($14.25{\pm}0.2mm$). GC-MS analysis revealed the dominant presence of oleic acid C 18.1 (63.18%), n-hexadecanoic acid (6.17%), and ethyl oleate (4.93%) and potent molecules such as 8-[(2E)-2-(3-hydroxybenzylidene)hydrazinyl]-1,3,7-trimethyl-3,7-dihydro-1H-purine-2,6-dione, 2-(Dimethylamino)ethyl (1Z)-N-hydroxy-2-(4-morpholinyl)-2-oxoethanimidothioate, Fluorene in the F41, and virtual study revealed that these molecules are likely responsible for the antibacterial activities of F41. Hence, further investigation deserves on purification and characterization of the active metabolites from T. atroviride strain KNUP001 towards developing molecular leads to effective antibacterial drugs, and non-toxic to host cells.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.521-529
• /
• 2002

A restraint coefficient for creep and dry shrinkage deformation of concrete in a composite section was derived to calculate the residual stress, and an equation for the loss rate of the pre-compression force was proposed. The derived restraint coefficient was computed by using the transformed section properties for the age-adjusted effective modulus of elasticity. The long-term behavior of complicate composite sections could be analyzed easily with the restraint coefficient. The articles of the current design code was examined for PSC and steel composite sections. The dry shrinkage strains of $150 ~ 200$\times$10^{-6}$ for the computations of the statically indeterminate force and the expansion joint could be under-estimated for less restrained sections such as the reinforced concrete. The dry shrinkage strain of $180$\times$10^{-6}$ for the computation of residual stress in the steel composite section was unreasonably less value. The loss rate of 16.3% of the design code for the PSC composite section in this study was conservative for the long-term deformation of the ACI 205 but could not be used safely for that of the Eurocode 2. For pre-compressed concrete slab in the steel composite section, the loss rate of prestressed force with low strength reinforcement was much larger than that with high strength tendon. The loss rate of concrete pre-compression increased, while that of pre-tension decreased due to the restraint of the steel girder.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.46-51
• /
• 1999

Objectives: Patients with premenstrual dysphoric disorder(or PMDD) have impairments of the social, occupational or academic function due to psychological or somatic symptoms, which have the characteristic pattern of symptom exacerbation in the week before menses begin and remission shortly after the onset of menses. In the chronobiological view, many researchers have assumed that the etiology of PMDD is the advanced circadian rhythm. It has been suggested that light has a therapeutic effect on PMDD, because evening light results in phase delay of circadian rhythm through the biochemical changes including melatonin. Methods: The authors investigated the therapeutic effect of light therapy on four patients with prospectively diagnosed PMDD by DSM-IV criteria using clinical psychiatric interview, Premenstrual Assessment Form(PAF) and Daily Rating Form(or DRF). In the evening(6:30pm-8:00pm), the 2,500 lux light administered for seven consecutive days during the symptomatic late luteal phase of menstrual cycle. Beck Depression Inventory(or BDI), Hamilton Rating Scale for Depression(or HAM-D), Spielberg State Anxiety Inventory(or SA), and DRF were evaluated before and after seven days of light therapy. Results: Premenstrual symptoms of PMDD could be effectively treated with the evening bright light therapy, especially in PMDD patients with atypical symptoms. In addition, the light therapy seemed to more effective on the psychologic symptoms than the somatic symptoms of PMDD. There was no significant side-effect of light therapy, except the transient and mild eye-strain in one case. Conclusions: In spite of the results of limited data from our clinical trial, the authors suggest that the potential use of light therapy as an alternative to the pharmacological management of patients with PMDD.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2419-2424
• /
• 2013

Guanosine-5'-diphosphate 3'-diphosphate (ppGpp) serves as alarmone in bacterial stringent responses. In this study, an affinity column was constructed by immobilizing ppGpp to NHS-Sepharose for isolating ppGpp-binding proteins. A novel ppGpp-binding protein, YjgA, was isolated and characterized by MALDI-TOF MS (matrix-assisted laser desorption ionization-time-of-flight mass spectrometry) coupled with two-dimensional gel electrophoresis. YjgA and truncated forms of YjgA were cloned and over-expressed in BL21 (DE3). The binding affinity of YjgA to ppGpp was determined by equilibrium dialysis. The interaction of YjgA with ppGpp was very specific, considering that the dissociation constant of YjgA with ppGpp was measured as $5.2{\pm}2.0{\mu}M$, while the affinities to GTP and GDP were about 60 and 30 times weaker than ppGpp. Expression of yjgA gene in Escherichia coli K-12 MG1655 was examined by reverse transcription polymerase chain reaction (RT-PCR). RT-PCR results revealed that yjgA was expressed from early to late stationary phase. The yjgA deletion mutant exhibited decreased cell number at stationary phase compared to parent strain and the over-expression of YjgA increased the cell number. These results suggested that YjgA might stimulate cell division under stationary phase. In most prokaryotic genome, about half of the protein candidates are hypothetical, that are expected to be expressed but there is no experimental report on their functions. The approach utilized in this study may serve as an effective mean to probe the functions of hypothetical proteins.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.