• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1049-1061
• /
• 2022

Neutron and gamma-ray shielding properties of Inconel 718 reinforced B₄C (0-25 wt%) were investigated using PSD software. Mean free path (MFP), linear and mass attenuation coefficients (LAC,MAC), tenth-value and half-value layers (TVL,HVL), effective atomic number (Z_eff), exposure buildup factors (EBF), and fast neutron removal cross-sections (FNRC) values were calculated for 0.015-15 MeV. It was found that MAC and LAC increased with the decrease in the content of B₄C compound by weight in Inconel 718. The EBFs were computed using G-P fitting method for 0.015-15 MeV up to the penetration depth of 40 mfp. HVL, TVL, and FNRC values were found to range between 0.018 cm and 3.6 cm, between 2.46 cm and 12.087 cm, and between 0.159 cm^-1 and 0.194 cm^-1, respectively. While Inconel 718 provides the maximum photon shielding property since it offered the highest values of MAC and Z_eff and the lowest value of HVL, Inconel 718 with B₄C(25 wt%) was observed to provide the best shielding material for neutron since it offered the highest FNRC value. The study is original in terms of several aspects; moreover, the results of the study may be used in nuclear technology, as well as other technologies including nano and space technologies.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.92-97
• /
• 2017

This study deals with new application method of the connecting tuned mass damper (CTMD) system for efficient vibration control of adjacent twin structures which have the same dynamic properties such as natural frequency and damping characteristics to each other. In the existing research, the vibration control of the twin structures has a limit to the application of the conventional damper-connection method of the twin structures. Due to the same frequency characteristics leading to the equally vibrating behaviors, it is impossible to apply the conventional connection method of the adjacent structures. In order to overcome these limitations induced by the symmetry of the dynamic characteristics, we propose a new CTMD-based control system that adopts the conventional connection configuration but unbalances the symmetric system by arranging the control device asymmetrically and then can finally achieve the efficient control performance. In order to demonstrate the applicability of the proposed system, numerical simulations of the optimally designed proposed system have been performed in comparison with the optimal design results of the existing independent single tuned mass damper (STMD) control system and the another optimal control system previously proposed by the same author, hereafter called CTMD-OsTMD. The comparative results of the control performances among STMD, CTMD-OsTMD and the proposed CTMD systems verified that the newly proposed control system can be a control-efficient and cost-effective system for vibration suppression of the two adjacent twin structures.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.937-960
• /
• 2015

Tuned mass dampers (TMDs) have been a prevalent vibration control device for suppressing excessive vibration because of environmental loadings in contemporary tall buildings since the mid-1970s. A TMD must be tuned to the natural frequency of the primary structure to be effective. In practice, a TMD may be assembled in situ, simultaneously with the building construction. In such a situation, the respective dynamic properties of the TMD device and building cannot be identified to determine the tuning status of the TMD. For this purpose, a methodology was developed to obtain the parameters of the TMD and primary building on the basis of the eigenparameters of any two complex modes of the combined building-TMD system. The theory was derived in state-space to characterize the nonclassical damping feature of the system, and combined with a system identification technique to obtain the system eigenparameters using the acceleration measurements. The proposed procedure was first demonstrated using a numerical verification and then applied to real, experimental data of a large-scale building-TMD system. The results showed that the procedure is capable of identifying the respective parameters of the TMD and primary structure and is applicable in real implementations by using only the acceleration response measurements of the TMD and its located floor.

• Journal of Microbiology and Biotechnology
• /
• 제13권1호
• /
• pp.139-145
• /
• 2003

The gene encoding Thermus caldophilus GK24 polyphosphate kinase (Tca PPK) was cloned and sequenced. The gene contains an open reading frame encoding 608 amino acids with a calculated molecular mass of 69,850 Da. The deduced amino acid sequence of Tca PPK showed a 40% homology to Escherichia coli PPK, and $39\%$ to Klebsiella aerogenes PPK. The Tca ppk gene was expressed under the control of the T7lac promoter on pET-22b(+) in E. coli and its enzyme was purified about 70-fold with $36\%$ yield, following heating and HiTrap chelating HP column chromatography. The native enzyme was found to have an approximate molecular mass of 580,000 Da and consisted of eight subunits. The optimum pH and temperature of the enzyme were 5.5 and $70^{\circ}C$, respectively. A divalent cation was required for the enzyme activity, with $Mg^2+$ being the most effective.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.26-32
• /
• 2017

Background: Ionizing radiation is known to be harmful to human health. The shielding of ionizing radiation depends on the attenuation which can be achieved by three main rules, i.e. time, distance and absorbing material. Materials and Methods: The mass attenuation coefficient, linear attenuation coefficient, Half Value Layer (HVL) and Tenth Value Layer (TVL) of X-rays (32 keV, 74 keV) and gamma rays (662 keV) are measured in Barium compounds. Results and Discussion: The measured values agree well with the theory. The effective atomic numbers ($Z_{eff}$) and electron density (Ne) of Barium compounds have been computed in the wide energy region 1 keV to 100 GeV using an accurate database of photon-interaction cross sections and the WinXCom program. Conclusion: The mass attenuation coefficient and linear attenuation coefficient for $BaCO_3$ is higher than the $BaCl_2$, $Ba(No_3)_2$ and BaSO4. HVL, TVL and mean free path are lower for $BaCO_3$ than the $BaCl_2$, $Ba(No_3)_2$ and $BaSO_4$. Among the studied barium compounds, $BaCO_3$ is best material for x-ray and gamma shielding.

• 대한화장품학회지
• /
• 제45권3호
• /
• pp.299-306
• /
• 2019

Ginseng berry(GB)는 진세노사이드Re를 함유하고 있으며, 항염, 피부 주름 완화의 기능을 가지고 있다. 본 연구에서는 Ginseng berry 아미노산 복합체의 TLC 분획 fraction 1, 2, 4를 확인하고 HPLC로 분석하였으며, fraction 1의 LC/MASS 분석을 통해 peptide (AP-1)를 동정하였다. AP-1에 의한 NO 생성 억제 효과를 조사하여 항염증 활성을 확인하였다. 또한 procollagen type I C-peptide (PIP) ELISA kit를 이용한 collagen 합성은 대조군 대비 50% 이상의 효과를 보였다. 이상의 결과로부터 진생베리 아미노산 복합체로부터 분리한 펩타이드는 항염과 주름개선 효능을 가진다고 사료되며, 향후 항염 및 항노화 화장품 원료로서의 이용 가능성을 보였다.

• Steel and Composite Structures
• /
• 제52권1호
• /
• pp.89-107
• /
• 2024

This article focuses on the static and dynamic analysis and optimization of an anisogrid lattice plate subjected to axial compressive load with simply supported boundary conditions. The lattice plate includes diagonal and transverse ribs and is modeled as an orthotropic plate with effective stiffness properties. The study employs the first-order shear deformation theory and the Ritz method with a Legendre approximation function. In the realm of optimization, the Non-dominated Sorting Genetic Algorithm-II is utilized as an evolutionary multi-objective algorithm to optimize. The research findings are validated through finite element analysis. Notably, this study addresses the less-explored areas of optimizing the geometric parameters of the plate by maximizing the buckling load and natural frequency while minimizing mass. Furthermore, this study attempts to fill the gap related to the analysis of the post-buckling behavior of lattice plates, which has been conspicuously overlooked in previous research. This has been accomplished by conducting nonlinear analyses and scrutinizing post-buckling diagrams of this type of lattice structure. The efficacy of the continuous methods for analyzing the natural frequency, buckling, and post-buckling of these lattice plates demonstrates that while a degree of accuracy is compromised, it provides a significant amount of computational efficiency.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.199-206
• /
• 2003

흙을 나타내는 가장 기본적인 물리적 성질중의 하나가 흙을 구성하는 입자들의 입도분포이며, 입도분포특성을 분석하기 위해 최근에 대두되고 있는 방법중의 하나가 프랙탈 이론이다. 본 연구에서는 fragmentation 프랙탈을 이용하여 흙의 입도분포곡선의 특성을 파악하였다. Fragmentation 프랙탈을 표현하는 방법에는 ‘개수-입경’프랙탈과 '중량-입경' 프랙탈이 있으며, 본 연구 결과, '중량-입경' 방법이 더 실용적이었다. 균등계수($C_{u}$)가 4이하에서는 균등계수가 증가함에 따라 프랙탈차원($D_{tot}$)이 급격히 증가하였으나, 균등계수가 6이상에서는 일정한 값에 수렴되는 결과를 나타냈다. 곡률계수($C_{c}$)가 3이상에서는 프랙탈차원은 크기가 작은 입자들의 영향을 받고, 곡률계수가 3이하에서는 큰 입자들의 영향을 받는 것으로 나타났다. 유효입경($D_{10}$)의 크기에 따른 프랙탈차원의 변화를 분석한 결과, 균등계수와 곡률계수가 같을 경우 프랙탈차원은 유효입경의 크기에 영향을 거의 받지 않는 것으로 나타났다. 전체 입자의 크기분포를 고려할 수 있는 프랙탈 개념을 입도분석에 적용하는 것이 바람직할 것으로 판단되며, 향후 프랙탈차원과 흙의 공학적 특성과의 관계정립에 대한 지속적인 연구가 필요하다.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.116-121
• /
• 2005

폐수 처리를 위한 PVA 포괄 고정화 담체의 특성에 관한 연구를 실시하였다. 특히 PVA의 고정화 조건에 따른 용해도의 영향, 첨가제가 PVA 물성에 미치는 영향, 제작된 PVA gel의 질산화 처리 효율을 살펴보았다. PVA gel 제작 과정 중 진공을 걸어줄수록 그리고 동결온도가 낮을수록 PVA gel의 용해도는 감소하였다. PAC와 같은 첨가제를 넣었을 때 PVA gel의 용해도는 감소하였고 특히 organoclay를 넣었을 때 PAC에 비하여 25% 낮은 용해도를 보였다. 질산화 효율면에서는 PVA로 코팅한 담체가 기존의 부착 담체에 비하여 용질과 산소 확산의 제한 때문에 질산화율이 낮게 관찰되었다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.860-866
• /
• 2019

The lead element or its salts are good radiation shielding materials. However, their toxic effects are high. Due to less toxicity of bismuth salts, the radiation shielding properties of the bismuth salts have been investigated and compared to that of lead salts to establish them as a better alternative to radiation shielding material to the lead element or its salts. The transmission geometry was utilized to measure the mass attenuation coefficient (${\mu}/{\rho}$) of different salts containing lead and bismuth using a high-resolution HPGe detector and different energies (between 81 and 1333 keV) emitted from point sources of $^{133}Ba$, $^{57}Co$, $^{22}Na$, $^{54}Mn$, $^{137}Cs$, and $^{60}Co$. The experimental ${\mu}/{\rho}$ results are compared with the theoretical values obtained through WinXCOM program. The theoretical calculations are in good agreement with their experimental ones. The radiation protection efficiencies, mean free paths, effective atomic numbers and electron densities for the present compounds were determined. The bismuth fluoride ($BiF_3$) is found to have maximum radiation protection efficiency among the selected salts. The results showed that present salts are more effective for reducing the intensity of gamma photons at low energy region.