• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.39-47
• /
• 2005

최근 들어 섬유혼합토가 도로 및 철도의 성토노반, 기층재료로 활용되기 시작하여 섬유혼합토의 변형특성에 대한 연구가 필요하게 되었다. 본 논문에서는 공진주시험을 통하여 섬유혼합토의 거동특성과 보강효과를 평가하였다. 여러 가지 입도의 사질토에 폴리프로필렌(polypropylene) 재질의 단섬유(staple fiber)를 중량비 0.3%로 혼합하여 시료를 성형하였다. 섬유혼합토의 최대전단변형계수는 양입도일수록 증가해, 비혼합토에 비해 최대 30%까지 증가하였다. 양입도의 전단변형계수는 빈입도보다 모든 전단변형률 범위에서 구속압에 관계없이 더 커, 양입도일수록 보강효과가 좋은 것으로 평가되었다.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1456-1469
• /
• 2000

Mechanical behaviors of uniaxially fiber-reinforced metal matrix composites under transverse loading conditions were studied at room and elevated temperatures. A mono-filament composite was selecte d as a representative analysis model with perfectly bonded fiber/matrix interface assumption. The elastic-plastic and visco-plastic models were investigated by both theoretical and numerical methods. The product of triaxiality factor and effective strain as well as stress components and strain energy was obtained as a function of location to estimate the failure sites in fiber-reinforced metal matrix composite. Results showed that fiber/ matrix interfacial debond plays a key role for local failure at the room temperature, while void creation and growth in addition to the interfacial debond are major concerns at the elevated temperature. It was also shown that there would be an optimal diameter of fiber for the strong fiber-reinforced metal matrix composite.

• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.283-290
• /
• 2017

시멘트계 재료의 성능을 개선시키기 위하여 다양한 섬유가 사용되고 있다. 이때, 섬유 사용 목적에 관계없이 섬유의 분산성은 목표로 하는 성능 개선에 매우 중요한 지표이다. 본 연구에서는 모르타르 내의 섬유활성탄의 분산을 전기저항 방법으로 평가하였다. 특히, 믹싱 방법과 섬유의 표면 처리에 따른 섬유 분산성의 차이가 다루어졌다. 연구 결과 표면전기저항 방법은 섬유활성탄의 분산성을 평가하는데 적합하였고, 초음파 방식의 분산 방법이 몰탈믹서와 핸드믹서 방법에 비하여 우월한 것으로 나타났다. 고성능 감수제는 섬유의 분산성을 향상하는 효과가 있었으나 산 처리는 전기저항성을 높이는 결과를 가져왔다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.137-140
• /
• 2009

Nowadays, the high performance composite materials are famous for the new construction materials as the construction buildings are bigger and higher. Out of them of all, the fiber reinforced concrete and mortar have been studied to develop and strengthen the performances of concrete, such as tensile strength, durability and the resistibility of crack. Also, it is considered that precast concrete is important alternatives of dry process for saving time, upgrading the material's quality and the productivity. Thus, PC panel is being produced for the use of dry wall as well as exterior finishing materials and it requires lots of tests and studies to be conducted to meet the various functional conditions. According to this study, it is considered that PVA fiber might be more effective than nylon fiber for developing the exterior PC panels.

• 정보통신설비학회논문지
• /
• 제8권2호
• /
• pp.90-95
• /
• 2009

All-optical fiber-type gain flattening filer (GFF) for an EDFA (Erbium doped fiber amplifier) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the GFF was tested and athermal package was proposed. Historically, the chief contributor to gain unevenness has been the EDFA. Due to the inherent gain response of the EDFA's operation, there is always a modest imbalance in the gain applied as a function of wavelength. FBT methods have been used to make fiber type couplers and WDM filter since 1980. Attractivity of this methods was simple, cost effective and thermal stability. Simulation program tool is made to design target GFF profile for this paper. Fiber coupler manufacturing machine is modified for the GFF process. The final GFF is obtained by cascading 4 unit filter that has 6 taper stage. Test result shows 1 dB of wavelength flatness in the C band. Polarization dependent loss is under 0.15dB. The center wavelength variation is below ${\pm}$0.35nm at the temperature range of $20^{\circ}C$ to $70^{\circ}C$.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.72-79
• /
• 2021

A circular saw is an effective tool for cutting glass and carbon-fiber hybrid composites. This study investigated tool wear and cut quality when reusing saw blades. The carbide saws wear four times faster than the new ones, and polycrystalline diamond (PCD) is very resistant to tool wear, except at the end of its lifespan. The cut cross-section quality is affected by the blade type, tool wear, and spindle speed. Alternate top bevel (ATB)-type blades are suitable for cutting fiber-reinforced plastics, but triple-chip grind (TCG)-type blades are unsuitable because they cause fiber-pullout defects. Tool wear and low spindle speeds increase the occurrence of arc scratches, due to the rear saw blade. A microscopic examination showed that the burr, which is a mixture of fiber chips and epoxy matrix, was bonded on top, and glass-fiber delamination occurred on the bottom glass-fiber-reinforced polymer (GFRP) surface.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.133-152
• /
• 2022

Ecological issues such as natural resource reduction and enormous waste disposals are increasingly leading in developing civilization toward sustainable construction. The two primary environmental issues are the depletion of natural resources and the disposal of trash in open landfills. Waste steel fiber (WSF) was investigated for usage as a cement-based concrete (CBC) constituent in this research. Recycling waste fibers both makes cement composites more long and cost-effective, also aids in pollution reduction. The objective of this study is to analyze the impacts of waste fiber on the fresh and mechanical features of concrete using recycled additives. A comparative research on the durability and mechanical qualities of fiber-reinforced concrete (FRC) constructed with natural aggregates was conducted for this aim. The obstacles to successful WSF recycling methods application in the building industry have been investigated, resulting that CBCs with these fibers make an economic and long lasting choice to deal with waste materials. The workability of fiber enhanced concrete was found to be comparable to that of normal concrete. Fibers have a considerable impact on the splitting tensile strength, flexural and compressive strength of recycled concrete. Fiber may enhance the water permeability. When the WSF content is 0.6 kg/m3, the water absorption is nearly half. Fibers would have no effect on its permeability.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.7-12
• /
• 2010

Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.

• 한국축산식품학회지
• /
• 제31권3호
• /
• pp.339-348
• /
• 2011

Ground pork containing 0, 1, 2, or 3% rice bran fiber was prepared. pH increased as the amount of rice bran fiber added increased (p<0.05) but decreased during storage. The lightness and redness values of the raw ground pork decreased with the addition of rice bran fiber, and ground pork containing 3% rice bran fiber had the highest yellowness value during early storage (p<0.05). Moreover, adding rice bran fiber was not associated with color stability during storage. Samples containing 2 or 3% rice bran fiber had improved cooking loss, hardness, gumminess, and chewiness. Furthermore, rice bran fiber enhanced tenderness, juiciness, and overall acceptability on a sensory evaluation. These physico-chemical properties were maintained to the final storage period. The best results were obtained with ground pork containing 2 or 3% rice bran fiber. Rice bran fiber combined with useful antioxidants may be a more effective approach to increase the stability of ground pork during cold storage.

• 한국건설순환자원학회논문집
• /
• 제2권4호
• /
• pp.345-353
• /
• 2014

This study was evaluated influence of fluidity properties according to basalt fiber and high volume fly ash in the mortar level, as part of a basic study for development of fiber reinforced concrete using basalt fiber and high volume fly ash. In the first step, it was evaluated that fluidity properties of mortar according to replacement ratio 6 level of fly ash(10, 20, 30, 40, 50 and 60mass%) and fluidity properties of mortar according to content 5 levels of SP(1.3, 1.5, 1.7, 1.9 and 2.1%) and content 5 levels of VA(0.2, 0.4, 0.6, 0.8 and 1.0%) for dispersion of the basalt fiber, in the second step, it was evaluated that fluidity properties of mortar using High-volume fly ash (50mass%) on 3 levels of basalt fiber length (6, 20 and 30mm). Results of assessment, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer, high volume fly ash (50%) applying the mixing, due to three properties of fly ash, showed that the improved fiber dispersibility and flow improvement.