• Journal of Haehwa Medicine
• /
• v.9 no.1
• /
• pp.135-142
• /
• 2000

For the evaluation of protective effect on hepatic damage by Korean red ginseng mixed formula, we used GR(Korean red ginseng), GRF-A(Korean red ginseng-mixed formula) as a materials. The study was performed on protective effect against hepatic damage induced by $CCl_4$. In vitro assay with 1.1 mM galactosamine, protection(%) was 44%(GR), 58%(GRF-A) at 50ug/ml, while maxium protection(%) was 5%(GR) and 24% (GRF-A) against acute hepatotoxicity by $CCl_4$. GRF-A significantly protected ethanol induced-liver damage by lowering ALT and ALP and fatty degenertion in liver tissue.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.461-461
• /
• 2005

• International Journal of Oral Biology
• /
• v.40 no.3
• /
• pp.143-146
• /
• 2015

The purpose of this study was to compare the effect of different methods of hand washing by counting the number of bacteria on the hand surface. Eighteen clinicians were chosen and divided into three groups, consisting of six clinicians each. Culturing of the right raw palms of all individuals was performed. Individuals in the control group washed hands for 5 seconds with antimicrobial soap. Group 1 washed their hands for 10 seconds with antimicrobial soap. Group 2 washed with an instant alcohol-based hand sanitizer. After the respective washes, re-culturing of the right raw palm was done for each member of all groups. The colony-forming units (CFU) were calculated at each time point, and the reduction rate of CFU among the three groups were statistically evaluated using student t-test. All groups showed a significant decrease in CFU, according to the time applied (P<0.01). In addition, the reduction rate of CFU between the groups were statistically evaluated with ANOVA (P<0.01). It showed statistically difference between the control group and group 1, control group and group 2. The present study confirmed that the hand washing method with antimicrobial soap for 10 seconds and hand sanitizer, including alcohol, were excellent for decreasing the number of bacteria on the hand surface.

• Computers and Concrete
• /
• v.31 no.3
• /
• pp.197-206
• /
• 2023

In this paper, the bending performance of a MSFRHPC (containing steel fiber, polyvinyl alcohol (PVA) fiber, and CW)-reinforced beam was studied for the first time. Introducing a multiscale fiber system increased the first crack load (up to 150%), yield load (up to 50%), and peak load (up to 15%) of reinforced beams. The multiscale fiber system delays cracking of the reinforced beam, reduces crack width of the reinforced beam in normal use, and improves the durability of the beam. Considering yield load and peak load, the reinforcing effect of multiscale fiber on the high-reinforcement ratio beam (1.00%) is better than that on the low-reinforcement ratio beam (0.57%). Introducing fibers slowed the development of cracks in the reinforced beam under bending. With the added hybrid fiber, the deformation concentration of reinforced beams after yield was more significant with concentration in 1 or 2 cracks. A model for predicting the flexural capacity of MSFRHPC-reinforced beams was proposed, considering the action of multiscale hybrid fibers. This research is helpful for structure application of MSFRHPC-containing CW.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.889-898
• /
• 2016

This study was to evaluate the characteristics of bread and the rheology of flour dough containing sugar alcohols, after addition of fructose. In the farinogram tests, the addition of sugar alcohol changed the stability and mixing tolerance index. The stability and mixing tolerance index of farinogram increased as the amount of sugar alcohols increased. Amylograms revealed that the increase in gelatinization temperature and maximum viscosity of wheat flour dough with sugar alcohols was more than that of controls. Extensogram of dough with sugar alcohols exhibited higher extensibility and resistance. After fermentation treatment, the dough volumes prepared with only sorbitol and xylitol were lesser than those prepared after addition of fructose. The volume of loaf and specific volume of bread containing sugar alcohols with fructose significantly increased. The breads containing sugar alcohols showed greater taste, flavor and texture scores, for breads prepared with either sorbitol with fructose or xylitol with fructose, compared to breads without fructose. Overall preference scores by sensory evaluation of bread containing sugar alcohols with fructose were higher than bread with only sugar alcohols. These results indicate that the addition of fructose improves the flavor of bread containing sugar alcohols.

• The Korean Journal of Food & Health Convergence
• /
• v.4 no.3
• /
• pp.6-11
• /
• 2018

In the Republic of Belarus as well as in the world acute problem of protecting forests from diseases and pests. The damage caused by root rot is essential, therefore, the problem of forest protection is an urgent task. The biologics has the greatest prospects in according with traditional methods of struggle. Deep method of cultivation of a mushroom Phlebiopsis gigantea with use of nutrient mediums on the basis of ethanol stillage and its components (fugat) is researched. Feasibility of use stillage as raw materials in production of a biological product for the wood protection against root decay is shown. The effect of different additives (sawdust, fodder yeast) on the accumulation of reactive biological product - oidy has been studed It was determined that the deep cultivation using sawdust of the highest accumulation oidy (1.5 $10^6units/ml$). It was also found that the stillage is the best breeding ground for fungus biomass accumulation (7.9 9.8 g / l) versus fugat (6.0 6.6 g / l). On the basis of research work the technological scheme for production of a biological product were developed. Based on the conducted studies, a technological scheme was proposed for obtaining a biological preparation by deep cultivation of the fungus Phlebiopsis gigantea.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.1-4
• /
• 1988

Rates of solvolysis of trans-[Co$(N-eten)_2Cl_2$]$^+$ have been investigated using spectrophotometric method at various pressures and temperatures in the mixtures of water with the t-butyl alcohol which possesses a high structure inducing capacity in water. The values of ${\Delta}V^{\neq}$ obtained from pressure effect on the rate constants were 2.55∼ 5.83 $cm^3mol^{-1}$. These values were discussed in terms of dissociative mechanism. Extrema found in the variation of ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ with solvent composition correlated with extrema in the variation of the physical properties of the mixtures. The logarithms of rate constants correlated linearly with both Grunwald-Winstein parameter and the reciprocal of dielectric constant ($Ds^{-1}$). The gradient, m of Grunwald-Winstein plot for the trans-[Co$(N-eten)_2Cl_2$]$^+$ was 0.09, which is significantly lower than those for the other cobalt (Ⅲ)-dichloro complexes. It was suggested that the reaction is an Id mechanism with long extension of Co-Cl bond in the transition state, as found for the C-Cl bond in the transition state for the solvolysis of t-butyl chloride.

• Korean Membrane Journal
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2009

This work reports the preparation of proton conductive crosslinked polymer electrolyte membranes by blending poly(vinyl chloride)-g-poly(hydroxyl ethyl acrylate) (PVC-g-PHEA) and poly(vinyl alcohol) (PVA). The PHEA chains of the graft copolymer were crosslinked with PVA using sulfosuccinic acid (SA) via the esterification reaction between -OH of polymer matrix and -COOH of SA. The PVC-g-PHEA graft copolymer was synthesized via atom transfer radical polymerization (ATRP) using direct initiation of the secondary chlorines of PVC backbones. Ion exchange capacity (IEC) continuously increased with increasing concentrations of SA, due to the increasing portion of charged groups in the membrane. However, the water uptake increased up to 20.0 wt% of SA concentration above which it decreased monotonically. The membrane exhibited a maximum proton conductivity of 0.026 S/cm at 20.0 wt% of SA concentration, which is presumably due to competitive effect between the increase of ionic sites and the crosslinking reaction.

• Membrane and Water Treatment
• /
• v.13 no.3
• /
• pp.121-128
• /
• 2022

A tremendous amount of energy resources is being wasted in cleaning wastewater to save the environment across the globe. Several different procedures are commercially available to process wastewater. In this work, membrane filtration technique is used to treat the textile wastewater because of its cost effectiveness and low environmental impacts. Mixed Matrix Membrane (MMM) consist of Polyvinyl Alcohol (PVA) in which Graphene Oxide (GO) was added as a filler material. Five different membranes by varying the quantity of GO were prepared. The prepared membrane has been characterized by Scanning Electron Microscopy (SEM), X-Ray Diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR) and Water Contact Angle (WCA). The prepared membranes have been utilized to treat textile wastewater. The synthesized membranes are used for the elimination of total dissolve solids (TDS), total suspended solids (TSS), Methylene blue (MB) dye and copper metallic ions from textile wastewater. It is concluded that amount of GO has direct correlation with the quality of wastewater treatment. The maximum removal of TDS, TSS, MB and copper ions are found to be 7.42, 23.73, 50.53 and 64.5% respectively and are achieved by 0.02 wt% PVA-GO membrane.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.4
• /
• pp.299-303
• /
• 2002

The oral bioavailability of itraconazole is variable and low in fasting state. This is mainly due to the low solubility of this drug. Bioavailability can be improved by changing the formulation and it is general that the liquid preparations show greater bioavailability than the solid dosage forms such as tablets and capsules do. Benzyl alcohol-water binary mixture showed the excellent solubilizing capacity for itraconazole but the release of the drug from the preparation needs to be enhanced. In this study, various nonionic surfactants and hydrophilic polymers, poloxamers, were screened to investigate their effects on the releasε of itraconazole from the liquid preparations. Poloxamer 407 showed the most enhancing effect on the drug release and the release rate was proportional to thε amount of poloxamer 407 added. A liquid preparation of itraconazole, consisting of benzyl alcohol/water/poloxamer 407 ternary solvent system, releasεd more than 80% of the total drug amount at 5 min and showεd the possibility of a new formulation development.