• Clinical and Experimental Pediatrics
• /
• v.63 no.11
• /
• pp.433-437
• /
• 2020

Background: Indonesia is one of the countries with the highest preterm birth rate. Preterm infants are more likely than term and normal weight infants to experience neonatal mortality and morbidity due to acute respiratory, gastrointestinal, immunologic, central nervous system, hearing, and vision problems. Kangaroo mother care (KMC) is a proven cost-effective intervention to help reduce mortality rates among preterm infants; however, it has not been fully implemented in hospitals. Purpose: Assess KMC knowledge and perceptions among health providers. Methods: This qualitative study was conducted from December 2015 to April 2016 and consisted of 21 in-depth interviews and 3 focus group discussions (FGDs). The 3 categories of health personnel in the study were clinical providers, hospital management representatives, and Indonesian Midwife Association members. Results: Most health providers know about the benefits of KMC including stabilizing temperatures, weight gain, and maternal-infant bonding and reducing human resources and labor costs. They were also aware of which newborns were eligible for KMC treatment. Their knowledge was mostly gained from observation or obtained from pediatricians and personal experience. They believed that a low birth weight infant in an incubator could not be treated with KMC and that it could only be practiced if a special gown was used when holding the baby. This perception could be caused by a lack of formal KMC training, leading to misunderstanding of its aspects. Conclusion: In conclusion, KMC knowledge of clinical providers in the 2 hospitals was sufficient, primarily due to their health-related educational background. Some perceptions could be potential barriers to or facilitate the implementation of KMC practice. These perceptions should be considered in future KMC training designs.

• International Journal of Computer Science & Network Security
• /
• v.21 no.2
• /
• pp.66-76
• /
• 2021

The quality of the E-learning education in Saudi Arabia has been a major concern by many academicians, especially, and people in general as this platform has not been a priority for education. Not until recently, the world has been impacted by the Covid-19 pandemic, which makes every education institution shifted to the online platform to continue the education for the students. Thus, many studies on the perceptions on the online learning have been carried out, and though many are focusing on the perceptions by the education institutions' faculty and administration, there is a lack in the amount of study performed to analyse the students' perceptions of online learning during the pandemic time. The current study is conducted by utilising qualitative methods in order to collect information and investigate the students' perception regarding online learning during the pandemic Covid-19, based on their individual experiences. A number of fifteen (15) students were selected as respondents for the study, in which structured interviews were conducted by using a convenient sampling technique for data collection. Through the discussion, all of the positive and negative perceptions of online learning, as well as the factors contributing to those perceptions were identified. The results of the study found that the positive perceptions were contributed based on the flexibility, cost-effectiveness, availability of the electronic research databases, and well-designed online classroom interfaces. For the negative perceptions from using online learning platforms, the respondents informed that they were contributed by the lecturer's delayed feedback, lack of technical support by lecturers, low in self-esteem and self-motivation, feel isolated, one-way of educational methods, and poorly-designed class materials. Through the findings, the school's administration and lecturers would be able to know the struggles experienced by the students, and eventually come out with better solutions to improve their teaching methods.

• Journal of Platform Technology
• /
• v.8 no.1
• /
• pp.24-32
• /
• 2020

This paper designed and manufactured a chip mounter based on 3D printer technology that can be used for educational research or sample production to disseminate chip mounter, a core technology of SMT line. A stepper motor with open loop control is used for low cost drive design. The shortcomings of the motor's vibration and disassembly caused by the use of the step motor were compensated by the Micro-Step control method. In the chip mounter experiment, the gerber file was generated on the small chip mounter, printed at the actual size, and the solder cream was printed on the HASL-treated PCB in the same manner as the sample board fabrication. As a result of the experiment, unlike the 2012 micro components, parts such as SOIC and TQFP that require correction are twice as long as the component mounting time, but it can be confirmed that they are mounted relatively accurately. In addition, as a result of repeatedly measuring the error of the initial position 10 times, it was confirmed that a relatively small error of about 0.110mm occurs.

• Journal of radiological science and technology
• /
• v.43 no.6
• /
• pp.453-460
• /
• 2020

The price of the Brain phantom (Hoffman 3D brain phantom) used in nuclear medicine is quite expensive, it is difficult to be purchased by a medical institution or an educational institution. Therefore, the purpose of present research is to produce a low-price 3D brain phantom and evaluate its usefulness by using a 3D printer capable of producing 3D structures. The New 3D brain phantom consisted of 36 slices 0.7 mm thick and 58 slices 1.5 mm thick. A 0.7 mm thick slice was placed between 1. 5 mm thick slices to produce a composite slice. ROI was set at the gray matter and white matter scanned with CT to measure and compare the HU, in order to verify the similarity between PLA which was used as the material for the New 3D brain phantom and acrylic which was used as the material for Hoffman 3D brain phantom. As a result of measuring the volume of each Phantom, the error rate was 3.2% and there was no difference in the signal intensity in five areas. However, there was a significant difference in the average values of HU which was measured at the gray and white matter to verify the similarity between PLA and acrylic. By reproducing the previous Hoffman 3D brain phantom with a 100 times less cost, I hope this research could contribute to be used as the fundamental data in the areas of 3D printer, nuclear medicine and molecular imaging and to increasing the distribution rate of 3D brain phantom.

• Advances in nano research
• /
• v.12 no.5
• /
• pp.515-527
• /
• 2022

The application of fibers in concrete obviously enhances the properties of concrete, also the application of natural fibers in concrete is raising due to the availability, low cost and environmentally friendly. Besides, predicting the mechanical properties of concrete in general and shear strength in particular is highly significant in concrete mixture with fiber nanocomposite reinforced concrete (FRC) in construction projects. Despite numerous studies in shear strength, determining this strength still needs more investigations. In this research, Adaptive Neuro-Fuzzy Inference System (ANFIS) have been employed to determine the strength of reinforced concrete with fiber. 180 empirical data were gathered from reliable literature to develop the methods. Models were developed, validated and their statistical results were compared through the root mean squared error (RMSE), determination coefficient (R²), mean absolute error (MAE) and Pearson correlation coefficient (r). Comparing the RMSE of PSO (0.8859) and ANFIS (0.6047) have emphasized the significant role of structural parameters on the shear strength of concrete, also effective depth, web width, and a clear depth rate are essential parameters in modeling the shear capacity of FRC. Considering the accuracy of our models in determining the shear strength of FRC, the outcomes have shown that the R² values of PSO (0.7487) was better than ANFIS (2.4048). Thus, in this research, PSO has demonstrated better performance than ANFIS in predicting the shear strength of FRC in case of accuracy and the least error ratio. Thus, PSO could be applied as a proper tool to maximum accuracy predict the shear strength of FRC.

• Journal of Creative Information Culture
• /
• v.5 no.3
• /
• pp.215-223
• /
• 2019

The wave of the information age gradually accelerates, and fusion analysis solutions that can utilize these knowledge data according to accumulation of various forms of big data such as large capacity texts, sounds, movies and the like are increasing, Reduction in the cost of storing data accordingly, development of social network service (SNS), etc. resulted in quantitative qualitative expansion of data. Such a situation makes possible utilization of data which was not trying to be existing, and the potential value and influence of the data are increasing. Research is being actively made to present future-oriented education systems by applying these fusion analysis systems to the improvement of the educational system. In this research, we conducted a big data analysis on Twitter, analyzed the natural language of the data and frequency analysis of the word, quantitative measure of how domestic windows education problems and outcomes were done in it as a solution.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.52-64
• /
• 2023

This paper concentrated on estimating the travel time value of individual regional bus passengers in various in-vehicle crowding conditions. In the analysis model, the traffic-selection data of individual transportation passengers based on smart-card data were used. Variables which reflect the level of in-vehicle crowding and the variables of in-vehicle travel time that reflect the level of in-vehicle crowding were included in the model using Box-Cox transformation. The result of this paper indicates that the travel time value experienced by individual users would increase as the in-vehicle crowding level increases. The smart card data used in this paper is considered to have significant implications in terms of conducting more sophisticated and realistic qualitative research to reflect the values of variables for in-vehicle traffic hours and in-vehicle crowding levels, which previously had limitations in observation and quantification. It is expected that the effects of improvement measures for reducing congestion on regional buses can be considered quantitatively by applying the estimation results of crowding multiplier.

• Journal of Information Technology Applications and Management
• /
• v.29 no.1
• /
• pp.47-57
• /
• 2022

The purpose of this study is to analyze the current status of augmented reality picture books, which have been steadily developed since 2010, as a genre of electronic picture books, and to reveal how children's immersion in augmented reality picture books differs from paper picture books. To this end, 30 augmented reality picture books on the market were analyzed according to genre, life theme, implementation method, and augmented reality scene ratio. As a result of the study, it was found that the genre of picture books was in the order of information fairy tales, daily fairy tales, and historical fairy tales, and there were no traditional or fantasy fairy tales. Animals and plants accounted for about half of the life topics, and in some cases, there were only a few or no other life topics. In the augmented reality implementation scene, it consisted of only one page in the early days, but all pages are now possible to implement augmented reality due to technology development, production cost reduction, and improved hardware performance of smartphones. It was found that the augmented reality implementation method used CD-ROM in the early days, but gradually became possible to implement using only mobile phones and tablets that were easy for readers to access. In addition, after presenting four picture books to eight 5-year-old infants, the immersion time was measured and the immersion behavior was observed. As a result, augmented reality picture books showed higher immersion[immersion time, immersion behavior] than paper picture books, but compared by literature genre, life fairy tales were higher in paper picture books and natural fairy tales in augmented reality picture books. It was higher when presenting augmented reality picture books after presenting paper picture books according to the order of presentation of picture book types. The results of this study suggest that more diverse life topics and augmented reality picture books in the genre of children's literature should be developed to increase the utilization of augmented reality picture books. In addition, considering that there are differences in immersion between types, literary genres, and reading experience [presentation order], it is expected to increase the educational effect by using picture books complementarily.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.163-169
• /
• 2010

Construction monitoring and monitoring industry have been rapidly developed with advance of IT industry and telecommunication. However institutional, legal supports that need to settle the construction monitoring are practically inadequate. So development plans that are reflected enquete results about the present state of construction monitoring are considered. A way that consider establishment Korea construction monitoring association and society, deal with relevant law appointing monitoring industry, consider enactment and revision of construction monitoring design standard and specifications, appoint practical construction monitoring educational institution, appoint an efficiency test specialty institution of monitoring equipment, consider the term of guarantee of monitoring equipment consider enactment and revision of estimating cost of construction measurement, consider ratio of monitoring equipment loss for developing construction monitoring and monitoring industry are proposed.

• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.159-169
• /
• 2023

This study analyzed the factors affecting the opinions of life-sustaining treatment among the elderly in Korea. The study subjects were 10,097 people who responded to the survey on the condition of the elderly (2020), and using the SPSS 25.0 program, first, the demographic characteristics of the research subjects were identified through descriptive statistics and the average and normality of major variables were identified. Second, the chi-square was analyzed by conducting a cross-analysis of opinions on life-sustaining treatment according to the characteristics of the elderly. Third, a correlation analysis was performed to analyze the correlation between major variables. Fourth, the relative influence on the life-sustaining treatment of the elderly was identified through multiple regression analysis. The main research findings are as follows. First, 8,565 (84.8%) of the elderly were opposed to medical treatment (life-sustaining treatment) to save them even if they were unconscious or difficult to live. Second, as a result of cross-analysis on life-sustaining treatment for the elderly, the 𝑥² values of education level, health status, living together with children, and cost of living in old age were found to be significant. Third, the educational level of the elderly, living together with children, and the cost of living in old age were found to have statistically significant negative effects on life-sustaining treatment. Such research results indicate that the elderly with a high level of education oppose life-sustaining treatment compared to those with a low level of education. In addition, in the case of the elderly with traditional values who responded that one of their children should live with the elderly (parents), the ratio of people in favor of life-sustaining treatment was high, and in the case of the elderly with modern values who responded that they did not have to live together, the ratio of opposition to life-sustaining treatment was high. appeared to be high. In addition, in the case of the elderly with traditional values who responded that the burden of living expenses in old age should be shared between the state and society and their children, the proportion in favor of life-sustaining treatment was high. This high figure expressed the desire for well-dying. Based on these research results, the value system was re-examined as a factor influencing the elderly's opinion on life-sustaining treatment, and basic data for welfare policies for the elderly were provided.