• Mass Spectrometry Letters
• /
• 제6권1호
• /
• pp.1-6
• /
• 2015

Direct analysis in real time mass spectrometry (DART-MS) is one of the variants of ambient mass spectrometry. The ionization process of DART-MS is in open environment and only takes few seconds, so it is suitable for fast analysis. Actually, since its introduction in 2005, more and more attentions have been drawn to its various applications due to its excellent properties, e.g., fast analysis, and no or less sample preparation, high salt tolerance and so on. This review summarized the promising features of DART-MS, including its ionization mechanism, equipment modification, wide applications, coupling techniques and extraction strategies before analysis.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.433-445
• /
• 2014

Single phase voltage source converter (VSC) is an important power electronic converter (PEC), including single-phase voltage source inverter (VSI), single-phase voltage source rectifier (VSR), single-phase active power filter (APF) and single-phase grid-connection inverter (GCI). As the fundamental part of large scale PECs, single-phase VSC has a wide range of applications. In the paper, as first, on the basis of the concept of the discontinuous pulse-width modulation (DPWM) for three-phase VSC, a new DPWM of single-phase VSR is presented by means of zero-sequence component injection. Then, the transformation from stationary frame (abc) to rotating frame (dq) is designed after reconstructing the other orthogonal current by means of one order all-pass filter. Finally, the presented DPWM based single-phase VSR is established analyzed and simulated by means of MATLAB/SIMULINK. In addition, the DPWMs presented by D. Grahame Holmes and Thomas Lipo are discussed and simulated in brief. Obviously, the presented DPWM can also be used for single-phase VSI, GCI and APF. The simulation results show the validation of the above modulation algorithm, and the DPWM based single-phase VSR has reduced power loss and increased efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.216-233
• /
• 2013

Conventional optimization designs of wireless networks mainly focus on spectral efficiency (SE) as a performance metric. However, as diverse media services are emerging, a green wireless network, which not only meets the quality of experience (QoE) requirements for users and also improves energy efficiency (EE), is the most appropriate solution. In this paper, we firstly propose the unit QoE per Watt, which is termed QoE efficiency (QEE), as a user-oriented metric to evaluate EE for wireless networks. We then analyze which is the kind of wireless resource given priority to use under different scenarios to obtain an acceptable QEE. Particularly, power, delay and data-rate related to QoE are separately addressed for several typical services, such as file download, video stream and web browsing services. Next, the fundamental tradeoffs are investigated between QEE and SE for wireless networks. Our analytical results are helpful for network design and optimization to strike a good balance between the users perceived QoE and energy consumption.

• 한국학교보건학회지
• /
• 제2권2호
• /
• pp.36-61
• /
• 1989

The purpose of this study was to identify and name clusters of school health program, and to describe some of the characteristics of administratie supports. The literature, materials and public documents were analysed by the chronological events from 1945 to 1989. The result of this study is as follows : 1. A brief summary of the history of school health program was included as an introduction to the analysis of the current programs of school health. Five current school health-program clusters were identified from findings of a study of programs : 1) physical assessment, laboratory examination and health services for the students, 2) health instruction 3) healthful living condition (environmental health), 4) health clinic management, 5) administrative supports. 2. The earliest school- based efforts focused on communicable disease pevention by the ministry of health and social affairs. Annual medical inspection (health assessment) for school children for eyes, ears, nose, and throat were mandated nation-wide in 1951 by physical assessment Act. 3. In 1979, the health instruction of schools to improve the health status of students was improved by health department in the Ministry of Education 4. Experiences in healthful environment were basic components of the school health program. However, without careful planning and supervision these experiences were not contributed to the goal of school health. The formal program of school health environment were initiated in 1979 5. In 1980, the guidelines of school health clinic management were prepared by Ministry of Education such as guidance of essential degrees and facilities in school health clinic. 6. Two patterns of administration of school health programs existed in Korea. In one the school health department operated its own health program and in the other the physical education department operated the health program within the school system. The school health department was established in Ministry of Education from 1979 to 1982. Improved school health programs will be a key element in the comprehensive national child health policy which I will ask the Ministry of Education to develop for the Department.

• Journal of Microbiology and Biotechnology
• /
• 제24권2호
• /
• pp.133-143
• /
• 2014

The development of the gut is controlled and modulated by different interacting mechanisms, such as genetic endowment, intrinsic biological regulatory functions, environment influences and last but no least, the diet influence. In this work, we compared the fecal microbiota of breast-fed (BF), formula-fed (FF), and mixed-fed (MF) infants from Hebei Province, China. By using high-throughput 16S rDNA sequencing analyses, we found some differences in gut microbiota in the three groups. Firmicutes and Proteobacteria were the dominant bacteria at the phylum level in the three groups, where FF infants showed a significant depletion in Bacteroidetes (p < 0.001) and Actinobacteria (p < 0.05). Enterobacteriaceae was the dominant bacteria at the family level in the three groups, but FF infants showed higher Enterobacteriaceae enrichment than BF and MF infants (p < 0.05); the abundance of the Bifidobacteriaceae was only 8.16% in the feces of BF infants, but higher than in MF and FF infants (p < 0.05). The number of genera detected (abundance >0.01%) in BF, MF, and FF infants was only 15, 16, and 13, respectively. This study could provide more accurate and scientific data for the future study of infant intestinal flora.

• Steel and Composite Structures
• /
• 제36권2호
• /
• pp.187-196
• /
• 2020

Double skin composite wall system owns several structural merits in terms of high load-carrying capacity, large axial stiffness, and favorable ductility. A recently proposed form of truss connector was used to bond the steel plates to the concrete core to achieve good composite action. The structural behavior of rectangular high walls under compression and T-shaped high walls under eccentric compression has been investigated by the authors. Furthermore, the influences of the truss spacings, the wall width, and the faceplate thickness have been previously studied by the authors on short walls under uniform compression. This paper experimentally investigated the effect of width-to-thickness ratio on the compressive behavior of short walls. Compressive tests were conducted on three short specimens with different width-to-thickness ratios. Based on the test results, it is found that the composite wall shows high compressive resistance and good ductility. The walls fail by local buckling of steel plates and crushing of concrete core. It is also observed that width-to-thickness ratio has great influence on the compressive resistance, initial stiffness, and strain distribution across the section. Finally, the test results are compared with the predictions by modern codes.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.497-506
• /
• 2020

CA mortar layer disengagement will give rise to the overall structural changes of the track and variation in the vibration form of the ballastless track. By establishing a vehicle-track-viaduct coupling analysis and calculation model, it is possible to analyze the CRTS-I type track structure vibration response while the track slab is disengaging with the power flow evaluation method, to compare the two disengaging types, namely partial contact loss at one edge beneath track slab and partial contact loss at midpoint beneath track slab. It can also study how the length of disengaging influences the track structures vibration power. It is showed that when the partial contact loss beneath track slab, and the relative vibration energy level between the rail and the track slab increases significantly within [10, 200]Hz with the same disengaging length, the partial contact loss at one edge beneath track slab has more prominent influence on the vibration power than the partial contact loss at midpoint beneath track slab. With the increase of disengaging length, the relative vibration energy level of the track slab grows sharply, but it will change significantly when it reaches 1.56 m. Little effect will be caused by the relative vibration energy level of the viaduct. The partial contact loss beneath the track slab will cause more power distribution and transmission between the trail and track slab, and will then affect the service life of the rail and track slab.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권6호
• /
• pp.811-816
• /
• 2007

Adipocyte fatty acid-binding protein (A-FABP), which belongs to the FABP family, plays an essential role in long-chain fatty acid uptake and metabolic homeostasis, especially in adipose tissue. The pattern of A-FABP gene mRNA expression in different growth stages and its relation to intramuscular fat (IMF) accretion in pigs was studied. Fifteen female $Duroc{\times}Landrace{\times}Yorkshire$ pigs in five groups of three pigs each, weighing 1, 30, 50, 70 and 90 kg were used to study developmental gene mRNA expression of A-FABP in various adipose tissues by means of semi-quantitative RT-PCR. Results showed that A-FABP mRNA levels in subcutaneous and ventral adipose tissues first increased from 1 to 50 kg, then gradually declined from 50 to 90 kg. Moreover, the rank order of A-FABP mRNA levels determined in three adipose tissues was as follows: subcutaneous adipose>ventral adipose>mesenteric adipose. A-FABP mRNA expression in mesenteric adipose tissue was constant during development. In addition, a positive correlation from 1 to 50 kg BW pigs and a negative correlation from 50 to 90 kg BW between A-FABP mRNA levels in subcutaneous and ventral adipose and IMF content were found.

• Journal of Microbiology and Biotechnology
• /
• 제25권7호
• /
• pp.1056-1069
• /
• 2015

Osmotic pressure is a critical factor for erythritol production with osmophilic yeast. Protein expression patterns of an erythritol-producing yeast, Yarrowia lipolytica, were analyzed to identify differentially-expressed proteins in response to osmotic pressure. In order to analyze intracellular protein levels quantitatively, two-dimensional gel electrophoresis was performed to separate and visualize the differential expression of the intracellular proteins extracted from Y. lipolytica cultured under low (3.17 osmol/kg) and high (4.21 osmol/kg) osmotic pressures. Proteomic analyses allowed identification of 54 differentially-expressed proteins among the proteins distributed in the range of pI 3-10 and 14.4-97.4 kDa molecular mass between the osmotic stress conditions. Remarkably, the main proteins were involved in the pathway of energy, metabolism, cell rescue, and stress response. The expression of such enzymes related to protein and nucleotide biosynthesis was inhibited drastically, reflecting the growth arrest of Y. lipolytica under hyperosmotic stress. The improvement of erythritol production under high osmotic stress was due to the significant induction of a range of crucial enzymes related to polyols biosynthesis, such as transketolase and triosephosphate isomerase, and the osmotic stress responsive proteins like pyridoxine-4-dehydrogenase and the AKRs family. The polyols biosynthesis was really related to an osmotic response and a protection mechanism against hyperosmotic stress in Y. lipolytica. Additionally, the high osmotic stress could also induce other cell stress responses as with heat shock and oxidation stress responses, and these responsive proteins, such as the HSPs family, catalase T, and superoxide dismutase, also had drastically increased expression levels under hyperosmotic pressure.

• Journal of Microbiology and Biotechnology
• /
• 제28권11호
• /
• pp.1865-1875
• /
• 2018

Enhanced application of solid-state fermentation (SSF) in industrial production and the influence of SSF of Rhizopus K1 on glucoamylase productivity were analyzed using the flat band method. A growth model was implemented through SSF of Rhizopus K1 in this experiment, and spectrophotometric method was used to determine glucoamylase activity. Results showed that in bran and potato culture medium with 70% moisture in a loose state, ${\mu}$ of mycelium reached to $0.15h^{-1}$ after 45 h of culture in a thermostatic water bath incubator at $30^{\circ}C$. Under a low-magnification microscope, mycelial cells appeared uniform, bulky with numerous branches, and were not easily ruptured. The generated glucoamylase activity reached to 55 U/g (dry basis). This study has good utilization value for glucoamylase production by Rhizopus in SSF.