• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1049-1065
• /
• 2023

Recently, with the development of IoT, AI, and mobile terminals, medical information platforms are expanding. The medical information platform can determine a patient's emergency situation, and medical staff can easily access patient information through a mobile terminal. However, in the existing platform, emergency situation decision is delayed, and faster and stronger authentication is required in emergency situations. Therefore, we propose an edge computing-based medical information platform for automatic authentication using patient situations. We design an edge computing-based medical information platform architecture capable of rapid transmission of biometric data of IoT and quick emergency situation decision, and implement the platform data flow in emergency situations. Relying on this platform, we propose the automatic authentication using patient situations. The automatic authentication protects patient information through patient-centered authentication by using the patient's situation as an authentication factor, and enables quick authentication by automatically proceeding with mobile terminal authentication after user authentication in emergencies without user intervention. We compared the proposed platform with existing platforms to show that it can make quick and stable emergency decisions. In addition, comparing the automatic authentication with existing authentication showed that it is fast and protects medical information centered on patient situations in emergency situations.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.1
• /
• pp.43-54
• /
• 2012

This paper presents a new localization technique of an UGV(Unmanned Ground Vehicle) by matching ortho-edge images generated from a DSM (Digital Surface Map) which represents the 3D geometric information of an outdoor navigation environment and 3D range data which is obtained from a LIDAR (Light Detection and Ranging) sensor mounted at the UGV. Recent UGV localization techniques mostly try to combine positioning sensors such as GPS (Global Positioning System), IMU (Inertial Measurement Unit), and LIDAR. Especially, ICP (Iterative Closest Point)-based geometric registration techniques have been developed for UGV localization. However, the ICP-based geometric registration techniques are subject to fail to register 3D range data between LIDAR and DSM because the sensing directions of the two data are too different. In this paper, we introduce and match ortho-edge images between two different sensor data, 3D LIDAR and DSM, for the localization of the UGV. Details of new techniques to generating and matching ortho-edge images between LIDAR and DSM are presented which are followed by experimental results from four different navigation paths. The performance of the proposed technique is compared to a conventional ICP-based technique.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.9
• /
• pp.305-316
• /
• 2022

With the flood of digital data owing to the Internet of Things and big data, cloud service providers that process and store vast amount of data from multiple users can apply duplicate data elimination technique for efficient data management. The user experience can be improved as the notion of edge computing paradigm is introduced as an extension of the cloud computing to improve problems such as network congestion to a central cloud server and reduced computational efficiency. However, the addition of a new edge device that is not entirely reliable in the edge computing may cause increase in the computational complexity for additional cryptographic operations to preserve data privacy in duplicate identification and elimination process. In this paper, we propose an efficiency-improved duplicate data elimination protocol while preserving data privacy with an optimized user-edge-cloud communication framework by utilizing a trusted execution environment. Direct sharing of secret information between the user and the central cloud server can minimize the computational complexity in edge devices and enables the use of efficient encryption algorithms at the side of cloud service providers. Users also improve the user experience by offloading data to edge devices, enabling duplicate elimination and independent activity. Through experiments, efficiency of the proposed scheme has been analyzed such as up to 78x improvements in computation during data outsourcing process compared to the previous study which does not exploit trusted execution environment in edge computing architecture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1581-1587
• /
• 2021

As embedded system are used widely and variously, multi-edge system, which multiple edges gather and perform complex operations together, is actively operating. In a multi-edge system, it often occurs that an abnormal operation at one edge is transferred to another edge or the entire system goes down. It is necessary to determine and control edge anomalies in order to prevent system down, but this can be a heavy burden on the resource-limited edge. As a solution to this, we use power consumption data to check the state of the edge device and transmit it based on a QRcode to check and control errors at the server. The architecture proposed in this paper is implemented using 'chip-whisperer' to measure the power consumption of the edge and 'Raspberry Pi 3' to implement the server. As a result, the proposed architecture server showed successful data transmission and error determination without additional load appearing at the edge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1688-1696
• /
• 2020

The paradigm of Internet-of-things(IoT) systems is changing from a cloud-based system to an edge-based system to solve delays caused by network congestion, server overload and security issues due to data transmission. However, edge-based IoT systems have fatal weaknesses such as lack of performance and flexibility due to various limitations. To improve performance, application-specific hardware can be implemented in the edge device, but performance cannot be improved except for specific applications due to a fixed function. This paper introduces a edge-centric metamorphic IoT(mIoT) platform that can use a variety of hardware through on-demand partial reconfiguration despite the limited hardware resources of the edge device, so we can increase the performance and flexibility of the edge device. According to the experimental results, the edge-centric mIoT platform that executes the reconfiguration algorithm at the edge was able to reduce the number of server accesses by up to 82.2% compared to previous studies in which the reconfiguration algorithm was executed on the server.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.16-22
• /
• 1999

In this paper, an efficient algorithm for estimating real edge locations to subpixel values is described. Digital images are acquired by projection into image plane and sampling process. However, most of real edge locations are lost in this process, which causes low measurement accuracy. For accurate measurement, we propose an algorithm which estimates the real boundary between two adjacent pixels in digital imagery, with subpixel accuracy. We first define 1D edge operator based on the moment invariant. To extend it to 2D data, the edge orientation of each pixel is estimated by the LSE(Least Squares Error)line/circle fitting of a set of pixels around edge boundary. Then, using the pixels along the line perpendicular to the estimated edge orientation the real boundary is calculated with subpixel accuracy. Experimental results using real images show that the proposed method is robust in local noise, while maintaining low measurement error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.639-641
• /
• 2022

With the increasing of aging population, a lot of researches on monitoring systems for solitary senior citizens are under study. In general, a monitoring system provides a monitoring service by computing the information of vision, sensors, and measurement values on a server. Design considering data security is essential because a risk of data leakage exists in the structure of the system employing the server. In this paper, we propose a intelligent monitoring system for solitary senior citizens with vision-based security architecture. The proposed system protects privacy by ensuring high security through an architecture that blocks communication between a camera module and a server by employing an edge AI module. The edge AI module was designed with Verilog HDL and verified by implementing on a Field Programmable Gate Array (FPGA). We tested our proposed system on 5,144 frame data and demonstrated that a dangerous detection signal is generated correctly when human motion is not detected for a certain period.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.87-95
• /
• 2022

Recently, with the development of smart technology, in medical information platform, patient's biometric data is measured in real time and accumulated into database, and it is possible to determine the patient's emergency situations. Medical staff can easily access patient information after simple authentication using a mobile terminal. However, in accessing medical information using the mobile terminal, it is necessary to study authentication in consideration of the patient situations and mobile terminal. In this paper, we studied on medical information platforms based on big data processing and edge computing for supporting automatic authentication in emergency situations. The automatic authentication system that we had studied is an authentication system that simultaneously performs user authentication and mobile terminal authentication in emergency situations, and grants upper-level access rights to certified medical staff and mobile terminal. Big data processing and analysis techniques were applied to the proposed platform in order to determine emergency situations in consideration of patient conditions such as high blood pressure and diabetes. To quickly determine the patient's emergency situations, edge computing was placed in front of the medical information server so that the edge computing determine patient's situations instead of the medical information server. The medical information server derived emergency situation decision values using the input patient's information and accumulated biometric data, and transmit them to the edge computing to determine patient-customized emergency situation. In conclusion, the proposed medical information platform considers the patient's conditions and determine quick emergency situations through big data processing and edge computing, and enables rapid authentication in emergency situations through automatic authentication, and protects patient's information by granting access rights according to the patient situations and the role of the medical staff.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.863-868
• /
• 2013

In recently years, many digital logic systems based on graph theory are analyzed and synthesized. This paper presented a method of constructing the function using edge valued extension graph which is based on graph theory. The graph is applied to a new data structure. from binary graph which is recently used in constructing the digital logic systems based on the graph theory. We discuss the mathematical background of literal and reed-muller expansion, and we discuss the edge valued extension graph which is the key of this paper. Also, we propose the algorithms which is the function derivation based on the proposed edge valued extension graph. That is the function minimization method of the n-variables m-valued functions and showed that the algorithm had the regularity with module by which the same blocks were made concerning about the schematic property of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.105-108
• /
• 1996

In this paper, we present an interpolation schema for image resolution enhancement using fuzzy logic. Proposed algorithm can recover both low and high frequency information in image data. In general, interpolation techniques are based on linear operators which are essentially details in the original image. In our fuzzy approach, the operator itself balances the strength of its sharpening and noise suppressing components according to the properties of the input image data. The proposed interpolation algorithm is performed in three step. First logic reasoning is applied to coarsely interpret the high frequency information. These results are combined to obtain the optical output. Using our approach, resolution of the original image can be applied to various kind of image processing topics such as image enhancement, subpixel edge detection, and filtering.