The desulfurizers facility is cylindrical shape. To operate properly it needs nozzles cleaned, get rid of lime adhesion and sludge, repair the wear and corrosion of facility regularly. For this purpose, workers shall access the ceiling or vertical wall at high place. Ordinary scaffoldings such as steel pipe scaffolding or system scaffolding have been using so that workers can access them. With these ordinary scaffoldings, openings around cylindrical wall are inevitable which make workers can expose always to the risk of falling. The purpose of this study is to develop customized scaffolding to minimize the openings to prevent workers form falling during maintenance it. It consists of a hexagonal central tower and six trapezoidal outer towers. And the bracing among the towers have connected each other for self-standing and for maintaining the structure of towers. Span decks, the circumference footstools, steps, etc. are laid on each floor. The safety is reviewed by structural analysis and performance test. With this study, openings each floor of this scaffold are removed. The gap between the cylindrical wall and the edge of the work stage is approximately 100 mm. Therefore, we expect that workers can work safely and efficiently.
Park, Hae Won;Shim, Cha Sang;Lim, Jin Seon;Joe, Nam Hyun;Jeong, Jin Hoon
International Journal of Highway Engineering
/
v.19
no.6
/
pp.67-74
/
2017
PURPOSES : In this study, a three-dimensional nonlinear finite element analysis (FEA) model for airport concrete pavement was developed using the commercial program ABAQUS. Users can select an analysis method and set the range of input parameters to reflect actual conditions such as environmental loading. METHODS : The geometrical shape of the FEA model was chosen by considering the concrete pavement located in the third-stage construction site of Incheon International Airport. Incompatible eight-node elements were used for the FEA model. Laboratory test results for the concrete specimens fabricated at the construction site were used as material properties of the concrete slab. The material properties of the cement-treated base suggested by the Federal Aviation Administration(FAA) manual were used as those of the lean concrete subbase. In addition, preceding studies and pavement evaluation reports of Incheon International Airport were referred for the material properties of asphalt base and subgrade. The kinetic friction coefficient between the concrete slab and asphalt base acquired from a preceding study was used for the friction coefficient between the layers. A nonlinear temperature gradient according to slab depth was used as an input parameter of environmental loading, and a quasistatic method was used to analyze traffic loading. The average load transfer efficiency obtained from an Heavy falling Weight Deflectomete(HWD) test was converted to a spring constant between adjacent slabs to be used as an input parameter. The reliability of the FEA model developed in this study was verified by comparing its analysis results to those of the FEAFAA model. RESULTS : A series of analyses were performed for environmental loading, traffic loading, and combined loading by using both the model developed in this study and the FEAFAA model under the same conditions. The stresses of the concrete slab obtained by both analysis models were almost the same. An HWD test was simulated and analyzed using the FEA model developed in this study. As a result, the actual deflections at the center, mid-edge, and corner of the slab caused by the HWD loading were similar to those obtained by the analysis. CONCLUSIONS : The FEA model developed in this study was judged to be utilized sufficiently in the prediction of behavior of airport concrete pavement.
The androgenic gland secretes a hormone, androgenic gland hormone, which is believed to act on the differentiation of the primary, secondary, and behavioral sex characteristics in most malacostracan crustaceans. This report presents the ultrastructural morphology of the androgenic gland in the freshwater prawn Macrobrachium nipponense. This gland, located in the coxopodite of the last pair of walking legs, was attached to the subterminal region of the sperm duct. The gland was composed of simple cellular strands, encased by a fibrous sheath. Microvilli were situated in the fibrous sheath, especially at the edge of each cellular strand. The androgenic gland cells had the large and round nucleus and rough endoplasmic reticulum arranged either in spirals or in concentric circles throughout the cytoplasm of the cell. They also had the well-developed Golgi complex and long mitochondria with flat and transverse cristae. The Golgi complex was similar to microvesicular cluster, but usually in the shape of typical dictyosomes, These features of androgenic gland cells coincides well with the protein/peptide secretion in their function. However, despite the apparent ultastructual equipment for protein/peptide secretion, no accumulation of materials secreted were noticed in the cytoplasm. Therefore it is strongly suggested that the transient transportation of the materials into the hemocoel has occurred just after synthesis.
Two strains Pleurotus eryngii KNR2312 and A8B10 (Na) which have good traits in cap quality and speedy growing were selected to breed a new strain carrying the two traits. KNR2312-2636-$10{\times}18$ (Ga) with 45.2 cap lightness and 6.5 quality was breeded by a consecutive inbreeding between KNR2312-derived monokaryons. $Ga5{\times}Na5$ came from outcrossing between Ga and Na was backcrossed with KNR2312-derived monokaryons twice to improve quality in cap color and shape. Therethrough Ga5NaKNR2312-47KNR2312-$12{\times}38$ carrying lightness of 49.5, quality of 7.3 and weight of 95.1 g was selected. The selected strain possesses good quality and dark color of cap. Especially its edge is 24 mm thick, therefore it is not likely damaged during processing and distribution.
To search for habitat characteristics of myrmecochory Melampyrum species, diaspores and related ant species, habitat characteristics, collecting fruits and diaspores of three Melampyrum species, cafeteria experiments, and the related ant species were studied from May 2012 to November 2014. The habitat of Melampyrum species was south-facing open forest edge with slightly acidic soil and relatively shallow soiil layers. Major plants coexisting with Melampyrum species were four woody species including Quercus mongolica and four herbaceous species including Carex siderosticta. These Plants might be host plants of the Melampyrum species. The shape of the diaspore was an oval seed attached to the white cap on one side. Significant differences is proved between three plant species in weight of diaspores, seeds and and elaiosome ratios. Mean values of diaspores weight showed 10.6mg, 8.0mg and 7.2mg in M. setaceum var. nakaianum, M. roseum var. ovalifolium and M. roseum, respectively. The heaviest elaiosome is M. roseum var. ovalifolium with 1.2mg, M. setaceum var. nakaianum has 1.0mg and the lightest elaiosome is M. roseum with 0.8mg. Major ant species frequently transporting the diaspores of Melampyrum species are Myrmicinae four species; Myrmica kotokui, M. excelsa, Myrmecina nipponica and Aphaenogaster japonica. Further studies on Melampyrum species, hemiparasite annual myrmecochorous plant, and related ant species should be needed.
Based on the study, the issues and trends in the current functional sandal designs on the same product line will be examined for the future developments for the functional sandals and the results were obtained as follows. First, the sandals must have a high front heel with wide floors that meet the ground. Second, the preference for the chromatic colour is stronger than the achromatic colors. Third, the sandals must be designed in curves in terms of the height and shape of the heels and design must consider the shoe's balance. Fourth, the product must appear big to provide a sense of stability. However, the sandals must not be designed too big to make them look crude or cause inconvenience while exercising. Fifth, the sandals must not be designed in too complex ways. This study has investigated and analyzed the external design of functional sandals and the user reviews on the actual sandals were not done. Through more detailed studies, the diversity in the design of functional sandals must be south and Korea's competitive edge in the industry and design must be secured for the future.
To clarify some ambiguous diagnostic characters of Callicarpa japonica Thunb. and Callicarpa dichotoma (Lour.) K. Koch in Korea (Verbenaceae), the external morphology and micromorphology (leaf, anther, pollen, fruit, in particular endocarp surface and structure) of two taxa are studied and described in detail. It is confirmed that the following characteristics (e.g., the stem outline in a cross-section, the bud shape and length, the corolla tube length and the lobe length, the pattern of the anther dehiscence and length, and the endocarp morphology) are useful for distinguishing these two taxa. In particular, following three characteristics are most useful for an identification: (1) the corolla tube length of C. japonica (2.5-4.6 mm) is longer than that of C. dichotoma (0.7-1.0 mm); (2) the anther is dehiscing by an apical pore at the anthesis of C. japonica, while it is opening by a long fissure from the apex to the base in C. dichotoma; and (3) the edge of the endocarp (lateral view) in C. japonica is concave, while in C. dichotoma it is shown to be flat. On the other hand, the teeth state on the leaf margin and the position of inflorescence are not good diagnostic characteristics for identification. Additionally, the keys for all known Callicarpa taxa in Korea are provided.
Recently, the application of high strength and high performance concrete has been gradually increased as an important construction material for high rise and huge scaled construction. However, high performance concrete has undesirable characteristics of spalling subjected to high temperature due to its dense microstructure content. A spalling by fire brings surface failure and falling off concrete member. It is considered that spalling by fire should be taken into account for the safety of the concrete structure under fire. Therefore, in this paper, tests are carried out using high performance concrete containing polypropylene(PP) fiber in order to improve the fire resistance performance. PP fiber contents and member sizes are varied. According to experimental results, as for the influence of PP fiber contents, all the test specimens without PP fiber show entire failure in W/C of 35%, while they show nearly sound shape except some kinds of surface fracture in W/C of 55%. When PP fiber is contained more than 0.07%, favorable prevention effects of spatting by fire are obtained. As for the effects of test specimens size, it tends to increase the possibilities of spatting by fire as test specimens become larger. And spatting by fire at the edge of test specimens occurs more frequently than at the surface of test specimens. Residual compressive and tensile strength shows 45∼65 % of its original strength at W/C of 35%, and 30∼40% at W/C of 55 %.
Objective: Much has been known that the systematical theory of acupuncture was developed from stone needle as therapeutic tools for orthopedic diseases in ancient times. Stone needle is very old therapeutic method like moxibustion and has been recognized that it was developed since the Stone Age in China so far. In the present study, it was examined for the origination and formation of stone needle based on stone relics of the Stone Age in Korean Peninsular, the medical and geographical literatures. Materials and methods: The facts of stone needle was examined and arranged on the ancient medical or geographical literatures such as The Yellow Emperor's Canon Internal Medicine, Shanhaijing as an ancient geographical book, etc. The clan societies and family related to an origination of stone needle was chased together with their cultural characteristics and origination. The stone relics which have been digged out of historic sites in the North-East Asia were examined for a relevance to stone needle. Results: In The Yellow Emperor's Canon Internal Medicine, it was referred to the stone needle that originated from a fishery zone related to the east coast district in North-East Asia. Through the examination of Shan Hai Jing as an ancient geographical book and its historical reviews, a Go-yi clan society who keep Go's family tree dealt well with the stone needle and jewels including jade in the North-East Asia before the publication periods of The Yellow Emperor's Canon Internal Medicine, and is comprised in the culture of Dong-yi clan society but not the Chinese culture. The obsidian stones, which have been digged out of historical sites in the North-East Asia since the Stone Age, are originated from volcanic areas combined with seashore that seems to be Baekdu mountain district in Korea and Kyushu district in Japan. Furthermore, obsidian stone tools which were found out at Laodung peninsula and the Korean peninsula are archeologically similar to the stone needle with regards to the shape, size and dual-use. In addition, specific obsidian stone tools have been used in orthopedic surgery as well-crafted obsidian blades have a cutting edge up to five times sharper than high-quality steel surgical scalpels. Conclusion: The origin of obsidian stone needle is well corresponded to the explanation about that of the stone needle. It is suggested that the stone needle which influenced in completion of acupuncture and Meridian theory in China seems to be an obsidian stone, and distribution of obsidian stone needle has been closely connected to Dong-yi clan society which are lived in the North-East Asia including Baekdu-mountain district.
This is a study of CHOK-DU-RI(族頭里) a black crown-like headpiece worn by woman on formal occasion in Chosun Dynasty and has succeeded until now. CHOK-DU-RI was originated by BOKTAK worn by Mongolian noblewomen and inflowed to the last period of Koryo dynasty under occupation of Yuan. The documentary records of O-JU-YON-MUN-CHSNG-JON-SAN-KO( by Lee Kyu-kung CHUNG-JANG-KWAN-JON-SUH by Lee Tock-mu and KO-SA-TONG by choe Nam-sun verify CHOK-DU-RI is a custom of mongolian fusion that was affected by KO-KO of Yuan and was formed. Ko-Ko is the same as BOKTAK. It is assumed KO-KO is a borrowed name as its transcription varies. The name was given according to its appearance which is certified by the record CHANGCHUN-CHIN-IN-SEO-BANG-YU-RAM-KI. It says that it can be simply named KO-KO as its edge is alike ad goose or a duck. In addition KO-Ko was called CHOGTAI in case of being added a camel fur that is JUGDUR. CHOGTAI similarily pronounced with CHOK-DU-RI which of being added a camel fur that is JUGDUR, CHOGTAI similarily pronounced with CHOK-DU-RI which provd CHOK-DU-RI was originated in Mongol. The shape of BOKTAK is very high and wided toward the top with the top with the angle getting more pointed and a feather stuck on the side. But its height got lower and its size smaller as it did gradually Koreanized to a CHOK-DU-RI. The use of CHOK-DU-RI has been settled since the last period of Chosun Dynasty. It came to stay as a popular custom when King Young-jo and Jong-jo wanting to do away with the corrupt practice of KA-CHE encouraged women at that time to do their hairs with CHOK-DU-RI instead of KA-CHE. It is as follows the classification of CHOK-DU-RI. First classified by a use group is divided into ceremonial use such as the seven treasures CHOK-DU-RI and jeweled CHOK-DU-RI. Hereby it is assumed that CHOK-DU-RI was used regardless of fortune. Secondly it varies by its type of frame. There are SOM CHOK-DU-RI OHT CHOK-DU-RI and O-YOM CHOK-DU-RI a kind of SOM CHOK-DU-Ri formed a base of O-YOM-MO-RI. The third group by jeweling has WHE-BONG CHOK-DU-RI and TA-BONG-CHOK-DU-RI JEwele CHOk-DU-RI can be still seen being commercially lent and worn by the brides at nuptical ceremonies performed in tradition of fashion and when worn bya bride as she gives her parents to her parents-in-law.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.