• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.983-990
• /
• 2007

In this study, we propose a new pixel edge shape of the fringe field switching(FFS) mode which ensures more stable movement of liquid crystal molecules and higher transmittance at the edge part. the electro optical properties were calculated 3-dimensionally using by commercially available "Techwiz LCD". From the simulation results, we showed that the dynamic stability of liquid crystal molecules was obtained in a new pixel structure. We also revealed that the transmittance of the new pixel structure increased more than 6 % compared to that of the conventional pixel structure.

• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.193-197
• /
• 2014

Edges are a robust feature for object detection. In this paper, we present an edge-based background modeling method for the detection of moving objects. The edges in the image frames were mapped using robust Canny edge detector. Two edge maps were created and combined to calculate the ultimate moving-edge map. By selecting all the edge pixels of the current frame above the defined threshold of the ultimate moving edges, a temporary background-edge map was created. If the frequencies of the temporary background edge pixels for several frames were above the threshold, then those edge pixels were treated as background edge pixels. We conducted a performance comparison with previous works. The existing edge-based moving-object detection algorithms pose some difficulty due to the changes in background motion, object shape, illumination variation, and noises. The result of the performance evaluation shows that the proposed algorithm can detect moving objects efficiently in real-world scenarios.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.178-183
• /
• 2006

A Blu-ray disc, which has a more than 25GB optical capacity, has been known as a promising next-generation optical disc format. It commonly has a 1.1 mm thick substrate and a 0.1 mm thick cover layer for beam transmitting and the protection of the reflecting surface. The cover layer is generally formed by the spin coating process. However, in conventional spin coating, small bumps are formed along the rim of the disc, which results in the fatal reading error. Numerical simulation of the thin film flow behaviors during spin coating with the commercial solver and optimal spinning conditions was obtained. Thickness distribution of the cover layer according to the variation of substrate's edge shape could be calculated as well. By modifying the shape of the substrate edge shape, the bumps along the disc rim could be minimized, and it was proved that the chamfered edge, around $5{\sim}10$ degree, is the simplest and most effective way to minimize the bumps.

• Corrosion Science and Technology
• /
• 제23권3호
• /
• pp.215-220
• /
• 2024

Recently, the demand for Zn-Ni electrogalvanized steel sheets for home appliances and automobiles is increasing. Products should have a thick plating (30 to 40 g/m²) on both side with a thin thickness (≤ 0.8 mm) and the highest surface quality. By a high current density operation, current is concentrated in the edge part of the steel sheet, resulting in large surface dent defects due to dendritic plating. This can lead to a low productivity due to low line speed operation. To solve this problem, this study aimed to identify factors influencing dendritic plating. A cylindrical electroplating device was manufactured. Effects of cut edge shape and thickness of steel plate, current density, temperature, flow rate, electrolyte concentration, and pH on dendrite generation of Zn-Ni electroplating were examined. To investigate effect of edge shape of the steel sheet, the steel sheet was manufactured using three processing methods: shearing, polishing after shearing, and laser. Relative effects thickness and cut edge processing methods of the steel plate, current density, temperature, flow rate, electrolyte concentration, and pH of plating solution on dendrite plating were investigated. To prevent dendrite plating, an edge mask was manufactured and its application effect was investigated.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.332-341
• /
• 1998

석판재의 모서리 가공작업은 많은 경우 자동화가 이루어지고 있지만 제품의 형태 가 복잡해지면 여전히 수작업에 의해 연마가 이루어지고 있다. 본 논문을 성형공구의 제작 에 앞서 성형공구의 특성과 장비의 운영요소들의 변화에 따른 연마절삭성능을 파악하기 위 한 기본시험이 수행결과를 나타내는 것이다. 장비의 운영요소는 헤드의 회전속도 및 이송속 도, 가압하중, 급수율, 절삭방향과 이송방향이 포함된다. 실험결과는 연마절삭성능 즉 공구 마모 무게에 대한 판재의 절삭량으로 표시하였고, 각 운영요소들 마다의 적정 운영수준이 제시되어 있다. 또한 연마재 투입략의 변화에 대한 마모시험에서는 마모도는 연마재의 증가 에 따라 증가하지만 어느 이상의 양에서는 오히려 감소하고 있다.

• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.559-564
• /
• 2016

The objectives of this paper are to develop a finite element analysis model to analyze press-fitted and bending load conditions in a press-fitted assembly, and propose a hub shape optimization method to minimize contact pressure near the shaft contact edge. Numerical asymmetric-axisymmetric finite element models have been developed to predict contact stress on press-fitted shafts. The global optimization method, genetic algorithm, local optimization method, and sequential quadratic programming were applied to a press-fitted assembly to optimize the hub contact edge geometry. The results showed that the maximum contact pressure with the optimized hub shape decreased more than 60 % compared to conventional hubs and the maximum contact stress affecting fatigue life was reduced about 47 %. Hub shape optimization can be useful to increase the load capability of press fits in terms of wear and fatigue behavior.

• 소성∙가공
• /
• 제18권1호
• /
• pp.52-58
• /
• 2009

Generally, a vertical rolling process is used to achieve extensive width reduction in hot strip mill. However, it is impossible to avoid the defects such as dog-bone and edge-seam defect. The sizing press process has been developed in response to the defects mentioned above. Especially, this study is carried out to investigate the deformation of slab by two-step sizing press. The deformation behavior of slab in the sizing press process is more favorable than that in conventional vertical rolling edger. The FE-simulation is applied to predict the deformation behavior of the slab. In this paper, the several causes of the asymmetrical deformation are mentioned for the purpose of understanding of the anvil shape. Load, dog-bone and edge-seam defect are discussed in width sizing process considering the anvil shape. And to reduce the problems generated at rougher mill just after sizing press, these are studied in this paper. The deformation behavior of slabs and optimum anvil shape are obtained by rigid-plastic finite element analyses and neural network.

• 한국컴퓨터그래픽스학회논문지
• /
• 제18권4호
• /
• pp.1-8
• /
• 2012

본 논문에서는 평면 형상에 대해 국소적 형태를 보존하는 형상 변형 기법의 시각적 품질을 향상시키기 위한 개선된 형상 변형 에너지를 제안한다. 형상 변형 에너지는 대개 형상의 윤곽선 변형 품질을 유지하기 위해 라플라시안 좌표, 형상 내부의 변형 품질을 유지하기 위한 평균값 좌표와 간선 길이 제한조건, 사용자 지정 정점의 위치 제한조건 등으로 구성된다. 형상 변형 기법은 사용자 지정 정점의 위치가 변화할 때, 정의된 형상 변형 에너지의 변화를 최소화하는 비선형 최소자승 최적화 기법을 사용하여 다른 모든 정점의 위치를 계산할 수 있다. 그러나, 사용자 지정 정점의 위치가 빠르게 변화하면, 형상의 라플라시안 벡터의 크기와 간선의 방향에 큰 변화가 발생하여 변형 결과의 시각적 품질이 급격히 감소하는 현상이 발생한다. 본 논문에서는 라플라시안 벡터의 크기와 간선의 방향 변화를 제한할 수 있는 새로운 제한 조건을 사용한 개선된 형상 변형 에너지를 제시한다. 개선된 변형 에너지는 최적화 수행 시간이 근소하게 증가하지만, 형상의 윤곽과 내부에서 변형 오차를 크게 줄일 수 있어 시각적으로 우수한 변형 결과를 얻을 수 있다.

• 한국강구조학회 논문집
• /
• 제18권1호
• /
• pp.81-91
• /
• 2006

파형 강판은 파형 형상으로 가공한 강판으로 교량, 건축물, 암거 등의 구조물에 많이 사용된다. 파형강판을 이용한 거더의 구조물 적용시 국부적인 면내 압축하중에 의해 크리플링현상이 발생할 수 있는데 높은 면외방향의 강성을 갖는 파형강판의 특성 때문에 보강재를 사용하지 않는 경우가 많이 있고 파형형상에 따라 지압하중의 경계조건이 달라진다. 몇 연구자들이 제형파형강판의 지압강도에 대한 연구를 하였으나 파형형상이 지압강도에 미치는 영향이 크게 고려되지 않았다. 따라서 본 연구에서는 이에 따른 영향을 유한 요소해석법을 통하여 여러 가지 파형형상에 대한 변수해석을 하고 지압강도를 복부판 내하력과 플랜지 내하력으로 나누어 파형 형상과 지압강도와의 상관관계를 파악하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.17-20
• /
• 2000

This paper describes a shape-based object recognition algorithm using multiple distance images. For the images containing dense edge points and noise, previous Hausdorff distance (HD) measures yield a high ms error for object position and many false matchings for recognition. Extended version of HD measure considering edge position and orientation simultaneously is proposed for accurate matching. Multiple distance images are used to calculate proposed matching measure efficiently. Results are presented for visual images and infrared images.