• 한국통신학회논문지
• /
• 제36권11C호
• /
• pp.662-672
• /
• 2011

본 논문은 새로운 경계선 보존 알고리즘을 이용하여 블록화 현상을 제거하는 디블로킹 필터와 HD해상도의 실시간 영상처리가 가능한 디블로킹 필터의 VLSI구조를 제안한다. 기존의 블록 분류 기반의 접근 방법과 달리 제안된 알고리즘은 픽셀 분류 기반 접근을 사용한다. 또한 제안된 경계선 보존 맵은 픽셀을 경계선 영역과 평탄 영역으로 분류하며, 블록화 현상 제거에 사용되는 오프셋 필터와 경계선 보존 필터의 기반이 된다. 이를 바탕으로 제안된 디블로킹 필터의 VLSI구조는 고연산량 처리를 위하여 블록 전체에 파이프라인 기법을 적용하였다. 또한 블록 버퍼를 위한 메모리 절감 구조는 메모리의 사용을 최적화 시킨다. 본 필터는 VHDL을 이용한 설계를 통하여 CycloneII FPGA상에서 구현된 구조의 동작을 검증 후, Synopsys의 Design Compiler와 ANAM 0.25 ${\mu}m$ CMOS cell library로 합성하여 칩으로 구현하였을 때의 성능을 예측하였다. 제안된 알고리즘의 실험 결과는 세밀한 영상성분을 보존하면서 효과적으로 블록화 현상을 제거하며, 픽셀 분류 기반에서 제안된 알고리즘은 블록 분류 기반보다 PSNR 성능이 우수함을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제22권5호
• /
• pp.69-73
• /
• 2022

본 논문에서는 LoG(Laplacian of Gaussian) 기반의 윤곽선 검출 기법을 통한 새로운 미세먼지 측정 방법을 제안한다. 미세먼지 측정을 위하여 CCTV 기반의 영상 이미지를 수집하고, RoI(Region of Interest)를 통해 이미지 범위를 지정한다. 지정된 영역에 GMM(Gaussian Mixture Model)을 적용하여 군집화 후, LoG 알고리즘을 통해 윤곽선을 검출하고 검출된 윤곽선 강도를 측정한다. 측정된 윤곽선의 강도 데이터를 기반으로 미세먼지의 농도를 결정한다. 본 논문에서 제안하는 알고리즘의 효용성을 입증하기 위하여 본교 연구실 주위에 설치된 CCTV 영상 이미지를 6~7월 한달간 수집하여 적용한 결과, 측정된 결과값은 미세먼지 농도와 범위를 계산하기에 충분함을 본 실험을 통해 입증하였다.

• 한국연소학회지
• /
• 제12권2호
• /
• pp.34-41
• /
• 2007

The dynamic behaviors of counterflow non-premixed flame have been investigated experimentally to study effects of heat losses and Lewis number on edge flame oscillation, which result from the advancing and retreating edge flame motion of outer flame edge at low strain rate flame. For low strain rate flame, lateral conduction heat loss in addition to radiation heat loss could be more remarkable than the others. Oscillatory instabilities appear at fuel Lewis number greater than unity. But excessive lateral conduction heat loss causes edge flame instability even at fuel Lewis number less than unity. The excessive heat loss caused by the smaller burner diameter in which the flame length is an indicator of lateral conduction heat loss extends the region of flame oscillation and accelerates oscillatory instability in comparison to the previous study with the burner diameter of 26mm. Extinction behaviors quite different from the previous study are also addressed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.12-14
• /
• 2005

In this paper, we proposed an temporal error concealment (EC) using the proposed boundary matching method and the adaptive block matching method. The proposed boundary matching method improves the spatial correlation of the macroblocks (MBs) by reusing the pixels of the concealed MB to estimate a motion vector of a error MB. The adaptive block matching method inspects the horizontal edge and the vertical edge feature of a error MB surroundings, and it conceals the error MBs in reference to more stronger edge feature. This improves video quality by raising edge connection feature of the error MBs and the neighborhood MBs. In particular, we restore a lost MB as the unit of 8${\times}$16 block or 16${\times}$8 block by using edge feature from the surrounding macroblocks. Experimental results show that the proposed algorithm gives better results than the conventional algorithms from a subjective and an objective viewpoint.

• Design & Manufacturing
• /
• 제10권3호
• /
• pp.8-13
• /
• 2016

Despite technological advance, there have been several troubles in photo reaction injection molding (photo RIM) to produce ultra thin light guide panels (LGPs). In this study, micro leakage problem at cavity edge during photo RIM was investigated numerically. In order to obtain optimal processing conditions, we regulated inlet pressure of injected resin at the cavity edge and figured out micro leakage behaviors. At low inlet pressure (less than 100 Pa), though the micro leakage problem was not occurred, another problem, short shot due to not enough driving force, was appeared More than 1,000 Pa of the inlet pressure, injected resin was rapidly leaked through the micro gap at the cavity edge. Finally, we obtained optimal inlet pressure around 600 ~ 1,000 Pa. At this region, injected resin fully filled the cavity without micro leakage behavior. Based on the present study, further comparative investigations with experimental photo RIM should be performed to find optimal processing conditions for produce ultra thin LGPs.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.878-884
• /
• 1991

The mobility and diffusivity in an edge dislocation in an FCC crystal formed by the removal of one half of a (100) plane were evaluated in an applied field by analyzing a vacancy tight binding model using Stark's matrix technique. A model of an edge dislocation in an FCC crystal was constructed for a [100] Burgers vector where vacancy transport along the edge dislocation in an FCC crystal was constructed for a [100] Burgers vector where vacancy transport along the edge of the extrac half plane of ions was considered. The model considered a tight binding approximation of the vacancy to the compressed region of the core and carried the calculation to the limit of an infinite length of dislocation. The diffusivity and the ratio of mobility to diffusivity were found to increase without bounds in the limit where the correlation factor becomes zero. In contrast, as the correlation factor became unity, the diffusivity became zero and the ratio of mobility to diffusivity became unity associated with the uncorrelated limit of 1/kT. This implied that the phenomenon was not unique to the crystal structure but was unique to edge dislocations with vacancy tight binding.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.36-42
• /
• 2014

In order to prevent the sharp edge during the side impact, a cause analysis and CAE based risk prediction were carried out in this study. It was found that sharp edge occurs mainly because of stiffness difference between the major parts and structural stress concentration. It could be improved by directly reinforcing the crack initiation region or by weakening the joints connecting the parts. The fracture criterion based on major in-plain strain was suggested and the risk prediction process for sharp edge prevention was established.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.671-677
• /
• 2003

Two-dimensional direct numerical simulation of the edge-tones by the finite difference lattice Boltzmann method (FDLBM) is presented. We use a new lattice BGK compressible fluid model that has an additional term and allow larger time increment comparing the conventional FDLBM, and also use a boundary fitted coordinates. We have succeeded in capturing very small pressure fluctuations result from periodically oscillation of jet around the edge. That pressure fluctuations propagate with the sound speed. It is clarified that the sound wave generated in rather wide region and individual vortices do not affect the sound wave propagation.

• Structural Engineering and Mechanics
• /
• 제21권1호
• /
• pp.67-82
• /
• 2005

This study analyzes stress intensity factors for a number of periodic edge cracks in a semiinfinite medium subjected to a far field uniform applied load along with a distribution of eigenstrain. The eigenstrain is considered to be distributed arbitrarily over a region of finite depth extending from the free surface. The cracks are represented by a continuous distribution of edge dislocations. Using the complex potential functions of the edge dislocations, a simple as well as effective method is developed to calculate the stress intensity factor for the edge cracks. The method is employed to obtain the numerical results of the stress intensity factor for different distributions of eigenstrain. Moreover, the effect of crack spacing and the intensity of the normalized eigenstress on the stress intensity factor are investigated in details. The results of the present study reveal that the stress intensity factor of the periodic edge cracks is significantly influenced by the magnitude as well as distribution of the eigenstrain within the finite depth. The eigenstrains that induce compressive stresses at and near the free surface of the semi-infinite medium reduce the stress intensity factor that, in turn, contributes to the toughening of the material.

• 한국정보통신학회논문지
• /
• 제10권3호
• /
• pp.549-555
• /
• 2006

에지검출은 영상처리와 컴퓨터비젼의 매우 중요한 연구분야이다. 그리고 일반적인 에지검출 연산자인 Robert, Sobel, Kirsh등의 연산자는 계단에지를 검출하는데는 적합하나 잡음에 매우 민감한 단점을 가지고 있다. 따라서 본 논문에서는 영상정보척도와 신경회로망을 이용한 잡음에 매우 강한 계단에지 검출방법을 제안한다. 계단에지의 명암도 분포의 차, 방향성, 연속성, 구조성 등의 계단에지의 기본적인 정보특성을 이용한 함수를 BP 신경회로망의 입력벡터로 구성한 결과 매우 위치가 정확한 계단에지를 얻을 수 있었다. 또한 실험 영상으로 장미 영상과 세포영상을 사용하여 매우 만족스런 실험 결과를 얻을 수 있었다.