• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.9
• /
• pp.924-933
• /
• 2007

An impeller is a important part of turbo-machinery. It has a set of twisted surfaces because it consists of many blades. Five-axis machining is required to produce a impeller because of interference between tool and workpiece. It can obtain good surface integrity and high productivity. This paper proposes finish cutting method for machining impeller with 5-axis machining center and optimization of cutting condition by response surface method. Firstly, cutting methods are selected by consideration of operation characteristics. Secondly, response factors are determined as cutting time and cutting error for prediction of productivity. Experiments are projected by central composite design with axis point. Thirdly, regression linear models are estimated as single surface in the leading edge and as dual surface in the hub surface cutting. Finally, cutting conditions are optimized.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.507-513
• /
• 2001

Time averaged pressure distributions in a high-speed centrifugal compressor channel diffuser at design and off-design flow rates are investigated. Pressure distributions from the impeller exit to the channel diffuser exit are measured for various flow rates from choke to near surge condition, and the effects of operating condition are discussed. The strong non-uniformity in the pressure distribution is obtained over the vaneless space and semi-vaneless space caused by the impeller-diffuser interaction. As the flow rate increases, flow separation near the throat, due to large incidence angle at the vane leading edge, increases aerodynamic blockage and reduces the aerodynamic flow area downstream. Thus the minimum pressure location occurs downstream of the geometric throat, and it is named as the aerodynamic throat. And at choke condition, normal shock occurs downstream of this aerodynamic throat. The variation in the location of the aerodynamic throat is discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.2
• /
• pp.44-51
• /
• 1993

Here is represented a vortex panel method to evaluate the performance characteristics of the 2-dimensional turbomachinery with circular arc blades or logarithmic blades. The present method is characterized by distributing small consecutive panels of linearly varing vortex strength satisfying boundary condition at control points and Kutta condition at trailing edge. To confirm the reliability of the present method, experimental result of a 2-D pump impeller of six circular arc blades is compared with the calculated one. As an application of the present method, figures are presented in series showing velocity and pressure distribution between blades.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.186-193
• /
• 2011

The NDIF method(non-dimensional dynamic influence function method) for free vibration analysis of arbitrarily shaped plates with the simply supported edge is newly developed in the paper. In order to extract the system matrix that gives the natural frequencies and natural modes of the plate of interest, the difficulty of measuring higher differential terms involved in the simply supported boundary condition is successfully overcome. Finally, the excellence of the characteristics of convergence and accuracy of the proposed method is shown through two verification examples, which indicate that natural frequencies and natural modes obtained by the proposed method are very accurate and swiftly converged even though a small number of nodes are used compared with FEM.

• Journal of Ship and Ocean Technology
• /
• v.7 no.3
• /
• pp.34-55
• /
• 2003

Explicit Kutta condition approximation, proved useful in existing time-domain solver of the unsteady propeller problem, requires a specified functional behavior of the vorticity in space near the trailing edge. In this paper, the strength of the discrete vortices is controlled to have a specified behavior in space in the frequency domain approach. A new formulation is introduced and is implemented for analysis of a lifting surface of a rectangular planform. Sample computations carried out according to the new formulation compares well with that of existing unsteady lifting problem in the time domain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.103-108
• /
• 2004

In this study, examined heavy-weight floor impact sound to structure that have slab thickness of 4 form at a standard laboratory through noise and vibration measured. The results show that the nature Natural frequency increased according to change of thickness of each slab by finite element analysis, and acceleration value decreased. Results of measurements of noise and vibration at a standard laboratory, the slab 210, 240mm structures was construed result such as finite element analysis but the slab 150, 180mm structures is construed that influence in vibration acceleration level because edge condition has condition that contact to ground. Therefore, in modelling process for analysis, is thought that need that condition analyzes examining element influencing about structure that contact to ground.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.57-71
• /
• 2010

This study is to understand the actual condition of design and material of peanut-shaped diaper with looking at the types and characteristics of baby cloth diapers and domestic peanut-shaped diapers registered in the Patent Office. Furthermore, it is to suggest the basic data for designing more functional and comfortable cloth diapers. Here are the research result on the actual condition of design and material of baby cloth diapers. Firstly, 11 cloth diapers registered in the Patent Office can be divided into panty-shaped and straight line-shaped diapers. There are 7 kinds of panty-shaped cloth diapers which satisfy both the convenience of a disposable diaper and sanitation of a cloth diaper, and 4 kinds of straight line-shaped cloth diapers that minimize the weaknesses of existing cloth diapers. Secondly, domestic peanut-shaped cloth diapers can be divided into peanut-shaped, inserted, winged, velcro-attached diapers. Among 23 kinds of peanut-shaped cloth diapers from 16 companies, there are 12 kinds of peanut-shaped diapers which consist of layers of cloth to make peanut shape. There are 6 kinds of inserted diapers that insert extra diapers or handkerchiefs in between two sheets of cloth diapers and 3 kinds of winged diapers designed to shorten drying time with sawing only one side of several layered sheets. Also, there are 2 kinds of velcro-attached diapers that are removable according to the amount of excreta. Commonly used materials are cotton woven of diamond jacquard and knit of diamond Hole Stitch or Plain Stitch. And for handing the edge of diaper, the method of wrapping up the edge with cotton woven or knit bias is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1819-1824
• /
• 2014

The vacuum-glazing panel is a panel that keeps two glasses completely sealed in a vacuum condition. It is the high function insulation material of having the wall level minimizing the heat loss by the conduction and convection heat transmission coefficient. The edge sealing is a very important process of vacuum glass on the strength, thickness and air tightness. In this study, by using the hydrogen mixture gas torch, two sheets of glass was sealing in the furnace. The thickness and strength of the glass according to the process parameters is measurement and analysis, and predicting the edge sealing strength of glass by using taguchi method of experiment. We verified the validity of the experiment by checking the error rate through additional experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.3
• /
• pp.30-39
• /
• 1986

The burr worsens the accuracy of a workpiece and decreases a lot of pro- ductivity because it takes so much time and efforts to remove it. In this paper, the height, thickness and size of a drilling burr were derived from the drilling variables of drill diameter, chisel edge angle, web rate =($\Frac{2{\times}\;web\;thickness}{drill\;dia}$) and yielding stress of the workpiece as wel as feed, point angle and helix angle. The theoretical and experimental values of drilling thrust, torque and burr size of the testpiece were analyzed with the method of numerical analysis in a standard drilling condition. The order of choosing the drilling variables for the purpose of controlling the burr size was dealt in this paper with burr forming ratio. The results are as follows: (1) The drill diameter forms 42 percents feed 25 percents point angle 23 percents and web rate, chisel edge angle and gelix angle 5 percents of the partial differential slope of drilling thrust within the usual available ranges of drilling variables. (2) The drill diameter forms 55 percents feed 26 percents web rate 9 percents and chisel edge angle, point angle and helix angle 10 percents of the par- tial differential slope of drilling torque in the usual available ranges of drilling variables. (3) About 70 percents of the burr size can be controlled by feed, 29 percents by web rate in the case of a fixed diameter. It is recommended drilling10 variables to be chosen in the order of feed, web rate, drill diameter, point angle, chisel edge angle and helix angle so as to control the burr size effectively.

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.167-176
• /
• 1995

Autumn visitors to Chuwangsan National Park was more than summer's. About 89% of total visitors used main trail but approximately 35% visited to the Third Falls. The entire width, bare width, maximum depth and slope of trail as the trail condition surveyed at the total of 103 points were significantly greater on the more heavily-used trail. Trail conditons of rock-exposed, root-exposed, deepening points as the deterioration types of trail were significantly different from those of non-deteriorated points. According to the topographic position of trail, severe difference of dominant trees in the edge vegetation was found and Lespedeza maximowiczii, Rhododendron yedoense and Fraxinus sieboldana were dominant in shrub layer of trail edge vegetation. The crown coverage, number of species and individuals of shrub layer in edge vegetation were generally higher than those in the other national parks with more heavily-used trail.