• ETRI Journal
• /
• v.40 no.5
• /
• pp.613-623
• /
• 2018

The instability of operational channels on cognitive radio networks (CRNs), which is due to the stochastic behavior of primary users (PUs), has increased the complexity of the design of the optimal routing criterion (ORC) in CRNs. The exploitation of available opportunities in CRNs, such as the channel diversity, as well as alternative routes provided by the intermediate nodes belonging to routes (internal backup routes) in the route-cost (or weight) determination, complicate the ORC design. In this paper, to cover the channel diversity, the CRN is modeled as a multigraph in which the weight of each edge is determined according to the behavior of PU senders and the protection of PU receivers. Then, an ORC for CRNs, which is referred to as the stability probability of communication between the source node and the destination node (SPC_SD), is proposed. SPC_SD, which is based on the obtained model, internal backup routes, and probability theory, calculates the precise probability of communication stability between the source and destination. The performance evaluation is conducted using simulations, and the results show that the end-to-end performance improved significantly.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.779-781
• /
• 2013

As the demand for various multimedia service increases the technology that utilizes image as information transfer method develops rapidly. Though average filter, median filter and weight filter etc. have been proposed to remove various noises that are added to images, the existing methods are short of noise removal and edge reservation performance. Therefore, in this paper an algorithm, in which noise is decided at the first hand, and then it is processed through modified median filter and adaptive weighted average filter, is proposed to effectively remove the complex noise that has been added to an image. And it was compared with existing methods through simulation and PSNR(peak signal to noise ratio) has been used as a criterion.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2504-2511
• /
• 1999

This paper proposes the scattered data interpolation as an efficient method that is designed for free-form surface. Data interpolation is an essential method of designing for various objects. For the generating free-form surface of complexity construction, the existing method had problems to represent flat area and sharp corner edge, in presenting objects with computing the weight of control points. For solving this problem, we proposes the generating method of new approximation surfaces, using scattered data interpolation. This method obtains B-Spline basis function which calculates main curvature, having optimized value in variable area, on given control points and changed objects, and then computes the changing rate the approximating data, using it's value. We also present this method that generates smoother free-form surface, using the scattered data interpolation with minimum weight.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4103-4114
• /
• 2024

This research aimed to develop lead-free polymer composites based on poly-methyl methacrylate (PMMA) and embedded with tungsten carbide (WC) micro and nanoparticles for use in radiation protection applications. PMMA was filled with 20 %, 40 %, and 60 % by weight of WC micro- and nanoparticles. The shielding features of the proposed polymer mixtures were evaluated at different radioactive sources of different energies using the HPGe detector. The results revealed that the investigated composites containing micro and nano-structured WC particles showed superior radiation shielding at 81 keV due to the K-edge of the W element occurring at 69.5 keV. The findings also demonstrated that composites loaded with WC nanoparticles were more effective in shielding gamma radiation than those loaded with WC microparticles, even at the same filler wt.%. Furthermore, the sample containing 60 % by weight of nano-WC, coded as P-60nWC, had superior shielding performance than other polymer-based composites reported in the literature. Thus, the proposed nano-WC/PMMA composites can be effectively employed in radiation facilities as alternative environmentally and lead-free radiation shielding materials to protect people and the environment from the harmful risks of gamma radiation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.147-157
• /
• 2023

Centella asiatica extract is widely used as a raw material for cosmetics due to its various effects, but it is difficult to expect penetration into the skin due to its high molecular weight and low solubility. In order to solve these problems, lipid-based liposomes of various types were developed to increase skin absorption. Therefore, in this study, we tried to increase the skin absorption rate by preparing transfersomes using surfactants as edge activators in existing liposomes. Liposome and transfersomes containing Span 80 and Tween 20, 60, 80, and 85, respectively, were prepared using a high-pressure homogenizer, and we evaluated the particle size, polydispersity index, zeta potential, and skin absorption rate. As a result, there was almost no change in the physical properties of particle size, polydispersity index and zeta potential from 25 ℃ to 60 d, and the particle size of transfersomes containing Tween 20, 60, and 80 increased after 60 d at 45 ℃. Madecassoside, main substances of the Centella asiatica extract was used as an standard and madecassoside was measured and calculated when measuring the skin absorption rate using Franz diffusion cells. As a result, formulations containing Tween 20 were the most, whereas formulations containing Span 80 were the least. According to the skin absorption coefficient (Kp) value, all formulations showed 'very fast', and the absorption rate was similar or greater than that of liposomes, except for formulations containing Span 80. Through this, it was confirmed that the larger the HLB value of the nonionic surfactant, the smaller the particle size of the transfersome, and the increased skin absorption rate due to the increased flexibility of the vesicle membrane. Through this study, transfersome using surfactant as an edge activator can be expected to solve local skin problems not only as a cosmetic raw material or product, but also by increasing skin absorption.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.362-368
• /
• 2023

This research article explores the application of Polymer of Intrinsic Microporosity (PIM-1) as a cutting-edge material for CO₂ gas separation membranes in response to the escalating global concern over climate change and the imperative to reduce greenhouse gas emissions. The study delves into the synthesis, molecular weight control, and fabrication of PIM-1 membranes, providing comprehensive insights through various characterization techniques. The intrinsic microporosity of PIM-1, arising from its unique crosslinked and rigid structure, is harnessed for selective gas permeation, particularly of carbon dioxide. The article emphasizes the tunable chemical properties of PIM-1, allowing for customization and optimization of gas separation membranes. By controlling the molecular weight, higher molecular weight (H-PIM-1) membranes are demonstrated to exhibit superior CO₂ permeability and selectivity compared to lower molecular weight counterparts (L-PIM-1). The study's findings highlight the critical role of molecular weight in tailoring PIM-1 membrane properties, contributing to the advancement of next-generation membrane technologies for efficient and selective CO₂ capture-an essential step in addressing the pressing global challenge of climate change.

• Journal of KIISE:Software and Applications
• /
• v.30 no.9
• /
• pp.862-866
• /
• 2003

Traveling Salesman Problem(TSP) is a combinational optimization problem, Genetic Algorithm(GA) and Lin-Kernighan(LK) Heuristic［1］that is Local Search Heuristic are one of the most commonly used methods to resolve TSP. In this paper, we introduce ACS(Ant Colony System) Algorithm as another approach to solve TSP and propose a new pheromone updating method. ACS uses pheromone information between cities in the Process where many ants make a tour, and is a method to find a optimal solution through recursive tour creation process. At the stage of Global Updating of ACS method, it updates pheromone of edges belonging to global best tour of created all edge. But we perform once more pheromone update about created all edges before global updating rule of original ACS is applied. At this process, we use the frequency of occurrence of each edges to update pheromone. We could offer stochastic value by pheromone about each edges, giving all edges' occurrence frequency as weight about Pheromone. This finds an optimal solution faster than existing ACS algorithm and prevent a local optima using more edges in next time search.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.702-712
• /
• 2017

In this paper, we propose an unsharp masking algorithm using Laplacian as a weight map for the signal structure and a gamma transformation algorithm using image mean intensity as a weight map for mean intensity. The conventional weight map based on the patch has a disadvantage in that the brightness in the image is shifted to one side in the signal structure and the mean intensity region. So the detailed information is lost. In this paper, we improved the detail using unsharp masking of patch unit and proposed linearly combined the gamma transformed values using the average brightness values of the global and local images. Through the proposed algorithm, the detail information such as edges are preserved and the subjective image quality is improved by adjusting the brightness of the light. Experiment results show that the proposed algorithm show better performance than conventional algorithm.

• International Journal of Safety
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2009

The CFRP composite has unique properties that offer high strength and stiffness, even though it has light weight. Therefore it can be used in many industrial applications. When mechanical fasteners are used for joining composites, high stress concentrations appear near the edge of holes prepared for accommodating structural bolts and rivets. This presence of high stress concentrations can be a source of damage. The aim of this work is to evaluate fracture behavior and patterns of plain woven CFRP with circular hole and repairing patch element. The maximum strength and pattern for the plain woven carbon composite specimen with the repaired circular hole were examined. From the results, we show that repairing of the CFRP composite specimen with ($\pi$) 3~5 mm of circular hole diameter results in load rising effect and the repairing is more effective as bigger hole specimen.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.10
• /
• pp.1644-1654
• /
• 2009

The concentration of dye uptake and the fastness improved when cotton and silk fabrics were treated with chitosan, a natural polymer. In this study, the effect of chitosan treatment was reviewed after the printing of cotton and silk fabrics padded with chitosan. When the change of physical and mechanical properties of printed fabrics was reviewed (as the concentration of chitosan increased) the thickness and weight increased a little, and the air permeability increased significantly than those untreated with chitosan. The dye uptake increased, accompanying a darker color shade, and the wash fastness increased 1/2-1 grade. The analysis results of enlarged images of printed patterns indicated that the width and area deformations were minimal as the concentration of chitosan increased when compared to untreated fabrics. Therefore, the dyeability and pattern quality were excellent after printing the chitosan-treated cotton and silk fabrics with cochineal dyestuff.