• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.395-408
• /
• 2015

High-resolution satellite image mosaics are becoming increasingly important in the field of remote sensing image analysis as an essential image processing to create a large image constructed from several smaller images. In this paper, we present an automatic seamline extraction technique and the procedure to generate a mosaic image by this technique. For more effective seamline extraction in the overlap region of adjacent images, an NDVI-based seamline extraction technique is developed, which takes advantage of the computational time and memory. The Normalized Difference Vegetation Index(NDVI) is an index of plant "greeness" or photosynthetic activity that is employed to extract the initial seamline. The NDVI can divide into manmade region and natural region. The cost image is obtained by the canny edge detector and the buffering technique is used to extract the ranging cost image. The seamline is extracted by applying the Dijkstra algorithm to a cost image generated through the labeling process of the extracted edge information. Histogram matching is also conducted to alleviate radiometric distortion between adjacent images acquired at different time. In the experimental results using the KOMPSAT-2/3 satellite imagery, it is confirmed that the proposed method greatly reduces the visual discontinuity caused by geometric difference of adjacent images and the computation time.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.153-162
• /
• 2008

We propose a novel image inpainting method composed of two parts: band matching and seamless cloning. In band matching, a band enclosing the boundary of a missing region is compared to those from the other parts of the image. The inner area of the minimum difference band is then copied to the missing region. Even though this band matching results in successful inpainting in many practical applications, brightness discontinuity (a seam) may appear between the filled missing region and its neighborhood. We apply seamless cloning to remove such discontinuity between the two regions. However, since this basic method using one patch may not deal with cases where there are abrupt changes of color or brightness along the boundary, we furthermore devise one more step: target sub-division. The target area is subdivided into small sub-areas, and the band matching and seamless cloning are applied to each of them. The multiple results from the sub-division are then ordered according to inpainting quality, which is measured based on the edge map or discontinuity map along the boundary band.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.295-306
• /
• 1996

A large quantity of exhumed clothing found for recent 20 years has becom-e the material for making a concrete clarification of the structure of clothing in the Chosun dynasty. Exhumed clothing means the clothing found in the coffin when the grave of the ancestor buried several hundred several hundred years ago is removed to another pla-ce and it is almost comprised of ordinary clothes of the grave-owner not mourning clothes as well as clothing and ornaments in the period between the 15th cen-tury and th 19th century. This research is intended to inquire into the kind of chimas in the 16th century before the Imjin Japancese Invasion of Korea during 1592-1598. The after effect of the Imjin Japanese In-vasion was generally reflected in clothing them and the structure of clothing in the Chosun dynasty began to overshadew its di-chotomy with the Imjin Japanese I vasion of Korea as the point. Accordingly this research is concerned with the study of the chima system of the early Chosun dynasty which shows that there is a common point of the identical form though clothing was exhumed in different graves. Therefore it was possible to grasp women's clothing that was fashionable at that time The object for research is the women in the upper class of the 16th century whose representative characteristics are depicted as follows: 1. Women in the upper class wore the splendid clothing similar to the ordinary clothing of court ladies. 2. The division of ordinary chima and ceremonial chima appeared in the concrete. 3. Ceremonial chima had its extra width and length and exhibited its exaggerated silhouette. in particular it had a various forms of over-pleats made at its center front which play a role in supplementing discomfort in walking. This associate bustle and crinolin styles through which the modern design of clothing can be glimpsed. 4. The opposite phenomenon was shown that has been perceived up to now such as folding at the right plain seam the treatment of the edge-and the like. 5. The elaboration of manual needlework shows the culmination of women's workmanship.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.2
• /
• pp.307-313
• /
• 1999

This study investigated material the type(sewn-in stamped-on etc) of the label and its placement(location on the product) on children's clothing in order to survey consumer complaints to suggest the improvement. The data were collected from label-producing companies by surveying children's clothing displayed at department store as well as by questionnaire to 205 consumers who were mothers of preschool children. The results were as follows : 1. 100% polyester was the most used raw material for brand labels and nylon was for care labels. 2. Most brand labels were one piece labels and located inside the back of neck line by sewn-in either on the top on each sides or on all four sides, Care labels were usually sewn-in on the inside of left-side seam line. The texture of care label was softer than that of brand label and two pieces of care labels were widely used, 3. 67.3% of consumers complained of its stiffness while 36.1% of consumers complained of rough surface and edge 85.4% of consumers complained of an itch caused by brand labels and claimed to detach labels. For care labels 36.6% expressed displeasure of stiffness of labels while 39% complained of annoyance due to too many pieces of labels. 4. Major suggestions from the consumers were change of raw materials and relocation of brand labels. For the care labels changes of material form and type of labels were suggested and one piece of label and smaller size were preferable.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.81-97
• /
• 2013

The purpose of this study is to summarize systematically and understand the characteristics of the production process of whole garments in order to develop knitwear using a real whole garment machine and propose this as a development case for high value added knitwear design. Concerning research methods, the study looked at existing research into whole garment knitwear and relevant data, data on websites, and the whole garment knitting machine made by Shima Seiki, a Japanese company, which has been the most commonly used machine in Korea. Also the study collected program data concerning a knitting machine and knitting by participating in the production process of whole garment knitwear, and the production line was filmed directly. In addition, the study conducted research into the development of knitwear design using the SWG-X 12 gauge. The conclusions obtained from the production process of whole garments and product development include the following. First, whole garment knitwear is appropriate for expressing a sophisticated look that makes the body appear to be in one form through natural connection without any seam allowance. Second, it is very suitable for response production since it does not go through the pattern, cutting, and processing stages. Furthermore, because of the consistent management of the entire process by computer control, it may be the highest cutting-edge fashion area in which planning and proposal style industry may be realizable. Third, it is easy to approach design through a programming process, and it is possible to develop diverse patterns; thereby, it is appropriate for producing high value added knitwear products.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2013

The concrete-filled tube column has the excellent structural performance. But it is difficult to connect with column and beam because of closed section. It suggests that pipe should be produced by welding two sides together where two shapes are joined after a channel is pre-welded onto the three sides in order to form an internal diaphragm. The upper diaphragm of the connection used the horizontal plate and the lower diaphragm used the Vertical plate. This research performed 6 monotonic tension experiments describing the connection upside and downside in order to evaluate the structural capability of the offered connection. And the cyclic loading experiment was performed about 2 T-Type column to beam connections. As to the experimental result edge cutting geometry, there was no big effect. An increase in the number of holes of the plate ultimate strength was increased by 5% and The thickness of the plate increases, the maximum strength was increased by 4%. T-Type connections until it reaches the plastic moment showed a stable behavior.