• Animal cells and systems
• /
• v.3 no.2
• /
• pp.161-165
• /
• 1999

Nephila clavata, a golden orb-web spider, was studied at two different field sites with respect to web size, height, and orientation. A majority of spiders at Site 1 (a band of shrub bush) built their webs parallel or nearly parallel to the edge of the bush. Similarly, at Site 2 (near a pond), most webs were aligned with the shoreline of the pond. Among the possible determining factors for the observed patterns of web orientation, wind and light did not appear important. Instead, the movement direction of insect prey appeared largely responsible. Disproportionately more webs faced outside the bush and toward the pond than inside the bush and away from the pond at Site 1 and 2, respectively. Such trend was more apparent for larger spiders with larger webs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.06a
• /
• pp.19-27
• /
• 2000

High speed machining (HSM), specifically end milling and ball end cutting, is attracting interest in the die/mold or aerospace industries for the machining of complex 3D surfaces. HSM of difficult-to-cut materials such as die/mold steels, titanium alloys or nickel based superalloys generates the concentrated thermal/frictional damage at the cutting edge of the tool and rapidly decreases the tool life. Following a brief introduction on HSM and reated aerospace or die/mold work, the paper reviews published data on the effect of cutter/workpiece orientation and cutting environments on tool performance. First, experimental work is detailed on the effect of cutter orientation on tool life, cutting forces, chip formation, specific force and workpiece surface roughness. Cutting was performed using 8 mm diameter PVD coated solid carbide cutters with the workpiece mounted at an angle of 45 degree from the cutter axis. A horizontal downwards cutting orientation proveded the best tool life with cut lengths ∼50% longer than for all other directions (horizontal upwards, vertical downwards, vertical upwards). Second, the cutting environments were investigated for dry, flood coolant, and compressed chilly air coolant cutting. The experiments were performed for various hardened materials and various coated tools. The results show that the cutting environment using compressed cilly air coolant provided better tool life than the flood coolant or the dry.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.2
• /
• pp.41-47
• /
• 2007

A fine segmentation algorithm is proposed for extracting objects in an image, which have both weak boundaries and highly non-convex shapes. The image has simple background colors or simple object colors. Two concepts, geometric attraction-driven flow (GADF) and edge-regions are combined to detect boundaries of objects in a sub-pixel resolution. The main strategy to segment the boundaries is to construct initial curves close to objects by using edge-regions and then to make a curve evolution in GADF. Since the initial curves are close to objects regardless of shapes, highly non-convex shapes are easily detected and dependence on initial curves in boundary-based segmentation algorithms is naturally removed. Weak boundaries are also detected because the orientation of GADF is obtained regardless of the strength of boundaries. For a fine segmentation, we additionally propose a local region competition algorithm to detect perceptible boundaries which are used for the extraction of objects without visual loss of detailed shapes. We have successfully accomplished the fine segmentation of objects from images taken in the studio and aphids from images of soybean leaves.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.210-216
• /
• 2014

The edge in the image is a part which the brightness changes rapidly between the object and the object or objects and background, and includes information of the features such as size, position, orientation, and texture of the object. The edge detection is the technique that acquires these information of the images, and now the researches to detect edges are making steady progress. Typical conventional edge detection methods are Sobel, Prewitt, Roberts using the first derivative operator and Laplacian method using the second derivative operator and so on. These methods is more or less insufficient that the characteristics of the edge detection in the image added salt and pepper noise. therefore, in this paper, an edge detection algorithm using modified mask that applies different size mask according to noise density of local mask is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2199-2205
• /
• 2013

In modern society the image processing has been applied to various digital devices such as smartphone, digital camera, and digital TV. In the field of image processing the edge detection is one of the important parts in the image processing procedure. The image edge means point that the pixel value is changed between background and object rapidly, and includes the important information such as magnitude, location, and orientation. The performance of the existing edge detection method is insufficient for the image degraded by AWGN(additive white Gaussian noise) because it detects edges by using small weighted masks. Therefore, in this paper, to detect edge in AWGN environment effectively, we proposed an algorithm that detects edge as calculated gradient of sorting vector which is transformed by estimated mask from new pixel according to each region.

• Steel and Composite Structures
• /
• v.16 no.2
• /
• pp.203-220
• /
• 2014

Stress intensity factors are numerically investigated for interfacial edge crack between two dissimilar composite plates jointed with single side composite patch. Variation of stress intensity factor under Mode I loading condition is examined for different material models and fiber orientation angles of composite plates and patch. ANSYS 12.1 finite element analysis software is used to obtain displacements of crack surfaces in the numerical solution and repaired plates are modeled in three dimensions. Obtained results are presented in the form of graphs. It is found that fiber orientation angle of composites is an effective parameter on interfacial stress intensity factor.

• Journal of Korea Multimedia Society
• /
• v.12 no.6
• /
• pp.804-814
• /
• 2009

In this paper, a novel system for avatar motion controlling by tracking face is presented. The system is composed of three main parts: firstly, LCS (Local Cluster Searching) method based face feature detection algorithm, secondly, HMM based feature points recognition algorithm, and finally, avatar controlling and animation generation algorithm. In LCS method, face region can be divided into many small piece regions in horizontal and vertical direction. Then the method will judge each cross point that if it is an object point, edge point or the background point. The HMM method will distinguish the mouth, eyes, nose etc. from these feature points. Based on the detected facial feature points, the 3D avatar is controlled by two ways: avatar orientation and animation, the avatar orientation controlling information can be acquired by analyzing facial geometric information; avatar animation can be generated from the face feature points smoothly. And finally for evaluating performance of the developed system, we implement the system on Window XP OS, the results show that the system can have an excellent performance.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.79-81
• /
• 2014

In B-scan data measured by a pulse-type monostatic borehole radar, target signatures are seriously obscured by two clutters that differ in orientation and intensity. The primary clutter appears as a nearly constant time delay, which is caused by internal ringing between antenna and transceiver in the radar system. The secondary clutter occurs as an oblique time delay due to the guided borehole wave along the logging cable of the radar antenna. This issue led us to perform adaptive filtering processing for orientation-based clutter removal. This letter describes adaptive filtering processing consisting of a combination of edge detection, data rotation, and eigenimage filtering. We show that the hyperbolic signatures of a dormant air-filled tunnel target can be more distinctly enhanced by applying the proposed approach to the B-scan data, which are measured in a well-suited test site for underground tunnel detection.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.119-125
• /
• 1997

The drilling experiment of carbon fiber epoxy composite material with WC-drill has been done under the various cutting conditions in order to minimize the problems occurred in the material while being drilled. It has been confirmed by a frequency analysis of the cutting force signals that the variation of cutting force resulted from the periodic variation of the angle between the ortating drill and the stacking angle of the carbon fiber. By the drilling experiment with several drills having different point angles, the drilling char- acteristics, which show the relations between the change in the point angle and cutting force or external surface condition, were analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.38-44
• /
• 1995

This paper presents a method to measure the position and orientation of a Cylindrical Object(unknown the eiameter and length) lying on a floor, using a camera. The two extreme cross section of the cylinder will be viewed as distorted ellipese or circular are, while its limb edge will be shown as two straight lines. The diameter of the cylinder is determined from the geometric properties of the two straight lines, which in turn provides information regarding the length of the cylinder. From the 3-dimensional measurement, the 3D coordinates of the center points of the two extreme cross sections are determined to give the position and orientation of the cylinder. This method is used for automated pick-and-place operations of cylinder, such as sheet coils, or drums in warehouses.