• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.6-11
• /
• 1997

In most machining operations, undesirable burr are formed on the edge of the workpiece adjacent to the machined surface. Such burrs are often the cause of various problems during automatic maching process. Therefore, it is very important to know characteristics of burr formation in maching process. This paper describes characteristic of exit burrs generated during miniature drilling process. In particular, the effect of spindle speed, feedrate and drill diameter on burr formaton is investigated. The result showed that exit burr height increased significantly with increasing feedrate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.137-141
• /
• 1993

In the case of a boring bar, the vibration amplitude is generallylarge due to its high slenderness. The boring bat is then modelled as a cantilever with dynamic force acting at the free end and a generalized model of nonlinear continous system is obtained. The Analysis of model is conducted for the specific case with a zero side cutting edge angle. The dynamic behaviour is investigated for machining processes in which the the overlap factor of regenerative effect is considered. The vibration characteristics of boring bar depth of cut rather than feed rate in given slenderness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.204-209
• /
• 1999

The dressing time monitoring in cylindrical grinding is very important with respect to machining efficiency. Therefore, the purpose of this paper is to determine the wheel life by monitoring behavior of grinding power for Wa, 19A and GC. For this purpose, we investigated indirectly the attritious wear of grain edge, the loading of grinding wheel and the breakage of grain through the grinding power and the surface roughness under various grinding conditions. From obtained the results, the relationship between the wheel life and the average sectional chip area is examined to guide for the determination of dressing time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.678-682
• /
• 1996

Acoustic emission(AE) is monitored during end milling with a sensor attached to the cutting fluid discharge nozzle. Cutting forces are also measured and compared with the AE signals to examine the reliability of the AE signals. It is demonstrated that the AE signals provide reliable informations about the cutting processes and tool states. Moreover, edge chipping and fracture of tools can be successfully detected using both the AE signals and cutting forces.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1515-1522
• /
• 1990

본 연구에서는 천연다이아몬드의 인선형상을 R형과 S형으로 구분하여 제작하 고 미세이송과 절삭속도 변화를 주어 이에 얻어지는 표현거칠기, 칩 생성기구 및 경면 성을 검토하였다.

• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.89-100
• /
• 2001

Swept volume is the sweeping region of moving objects. It is used in various applications such as interference detection in assembly design, visualization of manipulator motions in robotics, simulation of the volume removal by a cutter in NC machining. The shape of swept volume is defined by the envelope, which is determined by the boundary of moving objects and its direction of motion. In order to implement the generation of swept volume, researchers have taken much effort to develop the techniques how to generate the envelope. However, their results are confined to envelope generated only in simple shape objects, such as polyhedra or quadric surfaces. This study provided the envelope generation algorithm of NURBS objects. Characteristic points were obtained by applying the geometric conditions of envelope to NURBS equations, and then characteristic curves were created by means of interpolating those points. Silhouette edges were determined in the following procedures. First, two adjacent surfaces which have the same edge were found from B-Rep data. Then, by taking the scalar product of velocity vector of a point on that edge with each normal vector on two surfaces, silhouette edges were discriminated. Finally, envelope was generated along moving direction in the form of ruled surfaces by using both the partial information between initial and final position of objects affecting envelope along with characteristic curves and silhouette edge. Since this developed algorithm can be applied not only to NURBS objects but also to their Boolean objects, it can be used effectively in various applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1798-1803
• /
• 2003

Surface and edge finishing processes are important technological operations of in parts machining. Quality of the finished parts directly affect the performance of the whole product. Especially, edge quality, which depends on burr control, is extremely important. Burrs are undesirable projections of the material beyond the edge of the workpiece. A number of deburring processes have been developed such as barreling, brushing, chemical methods etc. But, there are only few publications in the area of applying ultrasonics to deburring. When ultrasonic vibration propagates in the liquid medium, a large number of bubbles are formed. These bubbles generate an extremely strong force, which can be used to remove burrs. Cavitation is used as a term to describe the erosion of parts caused by the action of cavities in liquid. The object of this study is to analyze the effects of ultrasonic cavitation in the deburring process. For this purpose, we introduce a new ultrasonic cavitation method, which efficiently removes the burrs. Experimental parameters to verify the deburring effects of ultrasonic cavitations are ultrasonic power, amplitude, distant of the transducer from the workpiece, deburring time and abrasive. It has been shown that deburring with ultrasonic cavitation in water is effective to burrs.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.34-40
• /
• 1998

The burr produced on piece part edges in machining operations must be removed for most parts to function effectively. Although considerable cost have been expended in improving deburring methods, little energy has been applied toward minimizing burrs. This study has been carried out to prevent the burrs produced on pure aluminium under various working condition and specimen shape in turning operations. The computer image processing system was used for measurement of size of burr, such as burr length, burr depth and burr area. The size of burr showed a decreasing tendency with the increase of rake angle and side cutting angle but it increased rapidly with the increase of depth of cut and the cutting speed has no effect on size of burrs. The size of burr rapidly decreased with the increase of edge angle and burrs are not occurred if edge angle is over 80$^{\circ}$.

• 소성∙가공
• /
• 제21권4호
• /
• pp.234-239
• /
• 2012

This study examines the forming properties and forming loads needed to increase the edge thickness on the external face of a plate using finite element analysis(FEA). Recently, forming optimization techniques within FEA are being extensively used in designing the optimal forming conditions for processes like forging, extrusion, rolling, and spinning. Most of these existing forming operations involve reducing the volume per unit length, but research for increasing volume per unit length is not very extensive. For this study we chose an automotive engine flywheel which is a welded assembly of a plate and a gear with each component having a different thickness. We considered a forming technique to increase the thickness in order to allow the machining of the gear directly on the external face of plate alleviating the need for a weld. To study various forming techniques, we used the finite element method with the flow stress of material and incremental forming steps. We conclude from this study that the analysis of forming properties and forming loads by using the finite element analysis and testing is useful as a method to increase the thickness per unit length.

• Design & Manufacturing
• /
• 제14권2호
• /
• pp.56-61
• /
• 2020

Recently, research for machining next-generation micro semiconductor processes and micro patterns has been actively conducted. In particular, it is applied to various industrial fields depending on the machining method in the case of FIB (Focused ion beam) milling. In this study, intends to deal with FIB milling machining technology for ultra-precision diamond tool fabrication technology. Ultra-precision diamond tools require nano-scale precision, and FIB milling is a useful method for nano-scale precision machining. However, FIB milling has a problem of Gaussian characteristics that are differently formed according to the beam current due to the input of an ion beam source, and there are process conditions to be considered, such as a side clearance angle problem of a diamond tool that is differently formed according to the tilting angle. A series of process steps for fabrication a ultra-precision diamond tool were studied and analyzed for each process. It was confirmed that the effect on the fabrication process was large depending on the spot size of the beam and the current of the beam as a result of the experimental analysis.