• 전자공학회논문지CI
• /
• 제46권2호
• /
• pp.44-51
• /
• 2009

자연 영상에서의 텍스트 이해는 지난 수년간 매우 활발한 연구 분야로 자리하고 있다. 논문에서 우리는 한국어 간판 영상으로부터 자동으로 텍스트를 인식하는 방법을 제안한다. 제안된 방법은 상호명의 인식을 위한 텍스트 영역의 검출 및 이진화를 포함하고 있다. 먼저 수직, 수평 방향의 에지 히스토그램을 이용하여 텍스트 영역의 정교한 검출을 수행하였다. 두 번째 단계는 검출된 텍스트 영역에 대해서 연결요소 기법을 적용하여 각각의 독립된 한 개의 문자 영역으로 분할되어지고, 마지막으로 최소 거리 분류법에 의해 각각의 글자를 인식한다. 각각의 문자 인식을 위해 모양 기반 통계적 특징을 추출한다. 실험에서 제안된 전체적인 효율성 및 정확성을 분석하였으며, 현재 구현된 모바일 시스템의 실용성을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제15권1호
• /
• pp.34-42
• /
• 1977

The author attempted to observed the histological changes of the temporomandibular joints of rabbits by including malocclusion. Thirth-two healthy male rabbits were devided into two groups; control and experimental group. Eight rabbits were kept as control group, while metal crowns were seated on unilateral lower molar teeth of twenty-four rabbits as experimental group. And the interocclusal distance of the incisal edge was kept 1.5mm from the begining to the end of the experimental periods. Rabbits of each group, one of control group and three of the experimental gorup, were killed at the intervals of one day, three days, one week, two weeks, four weeks, six weeks, eight weeks, and twelve weeks after experiment. The temporomandibular joint including condyle head, articular disc and glenoid fossa were excised and decalcified. The decalcified sections were made histologic sections. The results obtained were as follows. 1. The regressive changes of the condylar head were the main reaction in this experiment that consist of decreasing or increasing thickness of the fibrocartilage zone with hyaline degeneration, decreasing of the cellularity of the proliferative zone, and the irregularity of the arrangement of chondrocytes and size of the lacunae of cartilage cells with chondroclasia and osteoclasia in hypertrophic zone. 2. The regressive changes of the condylar surface of the crown seated side were persisted to the end of the experiment. 3. On the non-crown seated side, severe aggressive changes occurred in initial stage, but hyperplastic changes of the condylar surface noted in the middle of the experimental periods. 4. Although aggressive changes occurred in initial stage of experiment on the non-crown seated side, hyperplastic changes of the condylar surface were noted in the middle of the experimental periods, and remodeling appeared at the termination of the experimental periods. 5. The articular disc exhibited pannus formation on both crown seated and non crown seated side from the beginning of the experiment. The pannus persisted throughout the experiment on the crown seated side, but on the non-crown seated side it disappeared from six week group.

• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.839-856
• /
• 2012

To enable remodeling of the exterior of buildings more convenient, such finishing materials as curtain walls, metal panels, concrete panels or dry stones need to be easily detached. In this respect, this study proposed a new design of the slab for the purposes. In the new design, the sides of the slab were properly modified, and the capabilities of anchors fixed in the modified slab were experimentally tested. In details, a number of concrete specimens with different sizes and compressive strengths were prepared, and the effect of anchors with different diameters and embedment depths applied in the concrete specimens were tested. The test results of the maximum capacities of the anchors were compared with the number of current design codes and the stress distribution was identified. This study found that the embedment depth specified in the current design code (ACI318-08) should be revised to be more than 1.5 times the edge distance. However, with the steel sheet reinforcement, the experiment acquired higher tensile strength than the design code proposed. In addition, for two types of specimens in the tensile strength experiment, the current design code (ACI 318-08) is overestimated for the anchor depth of 75 mm. This study demonstrated that the ideal breakout failure was attainable for the side slot details of a slab with more than 180 mm of a slab thickness and less than 75 mm of an anchor embedment depth. It is expected that these details of the modified slab can be specified in the upgraded construction design codes.

• 대한기계학회논문집B
• /
• 제38권3호
• /
• pp.203-210
• /
• 2014

본 연구는 Weis-Fogh형 수차의 유체역학적 특성을 개선 와법으로 수치계산한 것이다. 날개(NACA0010에어포일)와 양쪽 수로 벽은 소스(Source) 및 볼텍스 판넬로 근사하였고, 자유 볼텍스는 각 물체 전체표면에서 도입하였다. 타임스텝마다 날개를 이동시켜가며 본 수차의 유동장 즉 비정상 속도장과 압력장을 계산하였다. 계산변수로는 주요 설계인자인 날개 뒷전에서 날개 축까지의 거리, 수로 폭 및 최대 열림각으로 하였다. 본 수차의 1매의 날개에 대한 최대 효율 및 출력계수는 속도비 U/V=2.0에서 각각 26% 및 0.4였다. 본 수차의 유동장은 날개가 수로 내에서 비정상적으로 움직이기 때문에 매우 복잡하다. 그러나 개선 와법을 이용하여 명확하게 계산할 수 있었다.

• 대한치과보철학회지
• /
• 제16권1호
• /
• pp.7-11
• /
• 1978

The author attempted to observe the histological changes of the periodontal structures induced by trauma from occlusion. Eighteen healthy rabbits were devided into two groups; control and experimental group. Three rabbits were kept as control group, while metal crowns were seated on unilateral lower molar teeth of fifteen rabbits were kept as experimental group. And the interocc1usal distance of the incisal edge was kept 1.5mm from begining to the end of the experimental period. Rabbits of each group consisting with three rabbits were killed at the intervals of three days, one week, two weeks, four weeks, eight weeks. The antagonistic teeth of maxilla including periodontal teeth were excised and decalcified for histologic preparation. The results obtained were as follows. 1. Destructions and ulcer formation of the sulcular epithelium and gingival epithelium occurred and persisted from the beginning of the experiment to the four weeks after experiment. The epithelal attachment were proliferated apically. 2. The pressure site were observed at the apical protion, where they showed compression of the periodontal ligament, thrombosis and congestion of blood vessels and hemorrhages. 3. At the pressure site, there appeared osteoclasts and bone resorption from the first week of experiment and it became more prominent at the second week with the extend into the marrow spaces adjacent to the periodontal membrane. 4. The phenomenon of bone apposition and resorption occurred at the fourth week of experiment. The reverse line of bone trabecular were more prominent. And the reactions were ceased at the eighth week of experiment.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1417-1443
• /
• 2016

Cellular and castellated steel beams are used to obtain higher stiffness and bending capacity using the same weight of steel. In addition, the beam openings may be used as a pass for different mechanical fixtures such as ducts and pipes. The aim of this study is to investigate the effect of different parameters on both elastic and inelastic critical buckling stresses of steel web plates with openings. These parameters are plate aspect ratio; opening shape (circular or rectangular); end distance to the first opening; opening spacing; opening size; plate slenderness ratio; steel grade; and initial web imperfection. The web/flange interaction has been simplified by web edge restraints representing simply supported boundary conditions. A numerical parametric study has been performed through linear and nonlinear finite element (FE) models, where the FE results have been verified against both experimental and numerical results in the literature. The web plates are subject to in-plane linearly varying compression with different loading patterns, ranging from uniform compression to pure bending. A buckling stress modification factor (${\beta}$-factor) has been introduced as a ratio of buckling stress of web plate with openings to buckling stress of the corresponding solid web plate. The variation of ${\beta}$-factor against the aforementioned parameters has been reported. Furthermore, the critical plate slenderness ratio separating elastic buckling and yielding has been identified and discussed for two steel grades of DIN-17100, namely: ST-37/2 and ST-52/3. The FE results revealed that the minimum ${\beta}$-factor is 0.9 for web plates under uniform compression and 0.7 for those under both compression and tension.

• 한국조경학회지
• /
• 제31권1호
• /
• pp.66-77
• /
• 2003

The purpose of this study is to propose a standard putting green management program to prepare fast green suitable for international golf tournaments, and to conform whether the reported green speed model can be applied to the real field situations. The west course of Lakeside Country Club was selected for the case study. This study was initiated on August 1st, 2001 and continued through October 4th, 2001. The results are summarized as follows: 1. Following the long-term schedule, 'penncross' creeping bentgrass turf was mowed at 5.0mm(37days), 4.5mm(8days), 4.0mm(4days), 3.5mm(2days), 3.2mm(2days), 3.0mm(2days), 2.8mm(2days) and the mowing direction was changed daily. Variation of mowing height was reduced to a minimum range. Core aerification with deep tines was applied 19 days prior to the first practice round. Dry sand maintenance was top-dressed 2 times at 1.5mm/$m^2$ on the 17th day and 1.0mm/$m^2$ on the 10th day. Minimum irrigation was applied to keep the turf alive. During the tournament preparation week, dew on the putting greens was removed by using a sponge roller. Following the dew removal, the greens were cut once each morning at a height of 2.8mm. The mower used was the 21 inch working behind mower equipped with a tournament bedknife and 11 reel blades. Following the mowing, the peens were rolled with a light-weight roller in one direction in the morning. Rolling was used as a finishing technique to ensure that the surface was as smooth as possible, and to provide true ball roll and maximum green speed. In conclusion these management practices satisfied the daily green stimpmeter readings required for USGA championship play. 2. During the period of tournament preparation, no damage was observed on the green, but scalping in green edge appeared in about 0.39% of the total area of 18 greens in the west course.

• 한국통신학회논문지
• /
• 제24권8B호
• /
• pp.1549-1557
• /
• 1999

이 논문에서는 잡음에 대해 유연성이 있는 신경망과 차영상법-DCT를 이용한 얼굴인식 알고리즘을 제안한다. 동일환경(조도의 세기. 얼굴에서 카메라까지의 거리)에서 연속적으로 두 개의 영상을 캡쳐했다. 이 때 한 영상은 얼굴을 포함하지 않고 다른 영상은 얼굴을 포함하게 된다. 차영상 방법을 이용하여 두 개의 이미지로부터 얼굴영상과 배경영상을 분리하고 그 다음에 분리된 얼굴영역에서 사각영역을 추출하여 이 영역을 얼굴의 특징영역으로 이용하였다. 이 사각 영역은 눈, 코, 입, 눈썹 등이 포함된다. 다음으로 이 영역에 대해 DCT 연산을 수행한 후 특징 벡터를 추출하였고 추출된 특징벡터는 정규화 되어 신경망의 입력벡터로 사용되었다. 시뮬레이션 결과 학습된 얼굴영상에 대해서는 100% 인식률을 보였고 학습되지 않는 얼굴 영상에 대해서는 92.25%의 인식률을 보였다.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.55-63
• /
• 2013

Purpose: The present study aimed at image processing methods for automatic cell pattern recognition and morphological analysis for tissue engineering applications. The primary aim was to ascertain the novel algorithm of adaptive brightness correction from microscopic images for use as a potential image analysis. Methods: General microscopic image of cells has a minor problem which the central area is brighter than edge-area because of the light source. This may affect serious problems to threshold process for cell-number counting or cell pattern recognition. In order to compensate the problem, we processed to find the central point of brightness and give less weight-value as the distance to centroid. Results: The results presented that microscopic images through the brightness correction were performed clearer than those without brightness compensation. And the classification of mixed cells was performed as well, which is expected to be completed with pattern recognition later. Beside each detection ratio of hBMSCs and HeLa cells was 95% and 92%, respectively. Conclusions: Using this novel algorithm of adaptive brightness correction could control the easier approach to cell pattern recognition and counting cell numbers.

• 농촌계획
• /
• 제2권2호
• /
• pp.57-66
• /
• 1996

The purpose of this study is to suggest the rural village model which is able to be applied to the rural village (re)development. The rural village model consists of five sector models land use model, residential unit model, public facilities allocation model, productive space arrangement model, road & green system model. The village model as a spatial structure needs modification/revision through the its application to various sites. The following are suggestions developed in the process of preparing a model for the Korean rural village. First, some indices presented in the land use model need to be further studied as the planning indices before implementing the rural village projects. Second, it is recomended that the image of a rural village needs to be created by developing the residential unit(6 households) as a planning development unit, And various residential unit models need to be suggested. Third, it is desirable to develop the double circulation system and green edge(1 m), and to introduce pedestrian road as much as possible for the amenity of the residential environment, Fourth, being located within walking distance from the existing village, new-introduced site should be developed as a interlinked and opened structure. The rural village model is useful in preparing the spatial structure for the village (re)development, and in finding the best design solution responsive to the conditions of a project site.