• 한국가시화정보학회지
• /
• 제15권3호
• /
• pp.52-56
• /
• 2017

In this study, we investigate the flow characteristics of lift-type disk which behaves the up-down motion using the large eddy simulation (LES) and immersed boundary method (IBM). Also, we perform the noise analysis using pressure field at 1.35 m distance and reveal the cause of noise to observe the vortical structure analysis of flow result. It is observed that vortical structure and wind shear were generated at leading edge and tower with high velocity deficit and flow separation. High magnitude of flow noise was observed in low frequency range which is from 30 Hz to 60 Hz. It was observed that vortical structure at leading edge was generated in frequency range from 33.3 Hz to 41.6 Hz. Temporal characteristic in vortical structure at leading edge was similar to noise characteristics, having the similar frequency ranges.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.362-366
• /
• 2014

In recent years, a permanent magnet linear synchronous motor (PMLSM) has been used in various kinds of transportation applications for its relative high power density and efficiency. The general transportation system arranges the armature on the full length of transportation lines. However, when this method is applied to long distance transportation system, it causes increase of material cost and manufacturing time. Thus, in order to resolve this problem, we suggested stationary discontinuous armature PMLSM. However, the stationary discontinuous armature PMLSM contains the edges which always exist as a result of the discontinuous arrangement of the armature. These edges become a problem because the cogging force that they exert bad influences the controllability of the motor. Therefore, in this paper we proposed the combination of skewed magnets and stair shape auxiliary teeth to reduce the force by edge effect. Moreover, we analyzed the influence of the design factors by using a 3-D finite element method (FEM) simulation tool.

• 한국수산과학회지
• /
• 제48권5호
• /
• pp.760-767
• /
• 2015

First annulus formation and age determination of otoliths were examined for chub mackerel Scomber japonicus collected in Korean waters over the one year from January to December in 2009. Translucent zone was regarded as an annual mark. Age interpretation criteria was based on the data of the number of translucent zone, capture date, and edge type of the otolith, assuming the nominal birthday to be 1 January. Monthly changes in mean marginal index indicated that translucent zone was formed once a year, mainly in June. The otolith of 0-ring group was detected comparing the progression by month of the smaller fish length, appearing to be a single first opaque zone. The average distance from the core to the first translucent zone was ~1.77 mm, provided as supplementary information to increase ageing accuracy. The ageing criteria for chub mackerel was made to determine correct year-class with the purpose of effective stock assessment. This method using nominal birthdate and edge type analysis could estimate age of fish closer to the true age than purely counting the number of translucent zone on a whole otolith.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.196-199
• /
• 2010

사람의 눈동자는 얼굴 크기와 비교해 볼 때 상대적으로 일정한 거리를 가지고 있기 때문에 이미지 정규화에 있어서 중요한 지표로 사용된다. 이 논문은 이러한 특징을 이용해 최적화된 세그멘테이션 방법을 사용하여 눈동자 검출의 새로운 접근방법을 소개한다. 눈 검출 방법은 세 가지 중요한 단계로 나눌 수 있다. (1)흑백 영상에서 눈 영역에 적합한 에지 추출 방법, (2)레이블링(labeling) 기법을 이용한 눈 영역 추출, (3)밝기값 정보를 이용한 눈동자 위치 검출. 실험 결과로는 다양한 조명 환경과 얼굴표정을 가진 2408장의 FERET 영상을 이용하여 98.9%의 검출 성능을 보였다.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1039-1049
• /
• 1994

The intermitternt and transient fuel spray have been investigated from the simultaneous measurement of droplet sizes and velocities by using Phase/Doppler Particle Analyzer(PDPA). Measurement have been done on the spray axis and at the edge of the spray near nozzle at various gas-to-liquid density ratios(.rho./sub g//.rho./sub l/) that ranges from those found in free atmospheric jets to conditions typical of diesel engines. Probability density distributions of the droplet size and velocity were obtained from raw data and mathematical probability density functions which can fit the experimental distribations were extracted using the principle of maximum likelihood. In the near nozzle region on the spray axis, droplet sizes ranged from the lower limit of the measurement system to the order of nozzle diameter for all (.rho./sub g/ /.rho./sub l/) and droplet sizes tended to be small on the spray edge. At the edge of spray, average droplet velocity peaked during needle opening and needle closing. The rms intensity is greatly incresed as the radial distance from the nozzle is increased. The probability density function which can best fit the physical breakage process such as breakup of fuel drops is exponecially decreasing log-hypebolic function with 4 parameters.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.257-272
• /
• 2018

The research of shear connectors composed from mechanical couplers with rebar anchors, embedded in concrete, and steel bolts, as a mean of shear transfer in composite connections is presented in the paper. Specific issues related to this type of connections are local concrete pressure in the connector vicinity as well as the shear flow along the connector axis. The experimental research included 18 specimens, arranged in 5 series. Nonlinear numerical analyses using Abaqus software was conducted on corresponding FE models. Different failure modes were analysed, with emphasis on concrete edge failure and bolt shear failure. The influence of key parameters on the behaviour of shear connector was examined: (1) concrete compression strength, (2) bolt tensile strength and diameter and (3) concrete edge distance. It is concluded that bolted shear connectors with mechanical couplers have sufficient capacity to be used as shear connectors in composite structures and that their behaviour is similar to the behaviour of post installed anchors as well as other types of connectors anchored without the head.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2312-2325
• /
• 2013

In this paper, we propose a preprocessing method that it is to correct the distortion of text area in Korean signboard images as a preprocessing step to improve character recognition. Distorted perspective in recognizing of Korean signboard text may cause of the low recognition rate. The proposed method consists of four main steps and eight sub-steps: main step consists of potential vertical components detection, vertical components detection, text-boundary estimation and distortion correction. First, potential vertical line components detection consists of four steps, including edge detection for each connected component, pixel distance normalization in the edge, dominant-point detection in the edge and removal of horizontal components. Second, vertical line components detection is composed of removal of diagonal components and extraction of vertical line components. Third, the outline estimation step is composed of the left and right boundary line detection. Finally, distortion of the text image is corrected by bilinear transformation based on the estimated outline. We compared the changes in recognition rates of OCR before and after applying the proposed algorithm. The recognition rate of the distortion corrected signboard images is 29.63% and 21.9% higher at the character and the text unit than those of the original images.

• Journal of Astronomy and Space Sciences
• /
• 제29권2호
• /
• pp.199-208
• /
• 2012

The world's first geostationary ocean color imager (GOCI) is a three-mirror anastigmat optical system 140 mm in diameter. Designed for 500 m ground sampling distance, this paper deals with on-orbit modulation transfer function (MTF)measurement and analysis for GOCI. First, the knife-edge and point source methods were applied to the 8th band (865 nm) image measured April 5th, 2011. The target details used are the coastlines of the Korean peninsula and of Japan, and an island 400 meters in diameter. The resulting MTFs are 0.35 and 0.34 for the Korean East Coastline and Japanese West Coastline edge targets, respectively, and 0.38 for the island target. The daily and seasonal MTF variations at the Nyquist frequency were also checked, and the result is $0.32{\pm}0.04$ on average. From these results, we confirm that the GOCI on-orbit MTF performance satisfies the design requirements of 0.32 for 865 nm wavelength.

• 한국세라믹학회지
• /
• 제35권11호
• /
• pp.1148-1154
• /
• 1998

Ga K-edge EXAFS spectra of PbO-Ga2O3 glasses were recorded at liquid nitrogen temperature and analyz-ed in order to quantitatively understand the medium-range-order arrangement around gallium in the glasses. The second peak was generated from a backscattering of the neighbor balliums and the Ga-Ga distance is ~3.13 A with Ga coordination number of ~2.7 Therefore GaO4 tetrahedra are connected through the cor-ner~sharing mode and form their own clusters made of the tetrahedra sharing more than 3 corners while some chains or rings are also present. These connection schemes of the GaO4 tetrahedra are believed to form the substantial part of the network structure.

• 농업과학연구
• /
• 제47권4호
• /
• pp.829-844
• /
• 2020

A vacuum metering device for garlic seeds was developed, and its metering performance was tested according to the design factors. Three design factors were as follows: suction surface diameter (Edge), suction surface curvature (Type), and guide height (Guide). The suction surface curvature represents the distance between the center of the grooved suction plate and the bottom of suction plate. The metering rate and multiple metering rate were analyzed as the metering performance of the developed device with two varieties of garlic seeds: Namhae (warm region-adapted garlic) and Uiseong (cold region-adapted garlic). The best metering performance for the Namhae seeds were found with the following conditions: An Edge, Guide and Type of 40, 4, and 35 mm, respectively. In the case of the Uiseong seeds, the best conditions were as follows: An Edge, Guide and Type of 35, 4, and 30 mm, respectively. The guide height was found to be the most influential design factor on the metering performance of the metering rate and multiple rate for both Namhae seeds and Uiseong seeds. Additionally, the interaction between the area of the suction surface and the curvature of the suction surface had some effects on the multiple rate for the Uiseong seeds. It was concluded that the guide height should be 4 mm or higher so that more than 90% of the metering rate could be achieved for the tested garlic seeds with the developed metering device.