• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.5
• /
• pp.51-58
• /
• 2004

In this paper, a mesh simplification algorithm is proposed which considers the conservation of the volume of a 3D model. In General, most of mesh simplification algorithm use a distance metric. The distance metric is very efficient to measure geometric error, but it causes volume changes between the original model and the simplified model. In this paper a mesh simplification algorithm which conserves the volume of the original model is suggested. A new vertex resulting from an edge contraction, takes a position which conserves the volume of the 3D model using the proposed algorithm. Although the new algorithm needs more time than the QEM algorithm, it is shown that it conserves the original volumn of the 3D model during the simplification.

• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.127-132
• /
• 1997

Microstructure of the Fe-Ti system by ion beam mixing of multilayers at 300 K and 77 K has been studied in a wide composition range. The ion bombardment was carried out using $Ar^+$ ions at 80 keV. Using grazing angle x-ray diffraction we find that the lattice parameters of these bcc solid solutions are very close to that of $\alpha$-Fe. Extended x-ray absorption fine-structure spectroscopy have been performed to investgate the short-range order in the ion-beam-mixed state. The structure parameters, such as the interatomic distance and the coordination number are estmated from the Fe K-edge Fourier filtered EXAFS spectra. The interatomic distance is independent of the alloy concentration and it is almost constant. The study of x-ray absorption near-edge structure gives information on the individual $\rho$components of the partial densityof states of the conduction band of the Fe and Ti We also find that a charge transfer from Ti to Fe atoms takes place.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.3
• /
• pp.299-309
• /
• 2016

This study proposed a logistics plan for sending supply to be distributed to areas other than producing areas to wholesalers and allocating supply to be distributed to areas near producing areas to local distribution center in the vicinity instead of shipping the entire quantity to wholesalers for fruits auction to increase the competitive edge of the domestic fruits and vegetables logistics market in the ear of infinite competition. A video auction-based short distance division logistics operation model was developed to enhance competitiveness related to the circulation of fruits and vegetables, reduce logistics costs, and rationalize logistics by distributing the items sent to wholesalers through field auction and the shipments at local distribution center to neighboring areas through video auction connected to wholesalers real-time. The study especially came up with a logistics rationalization plan by examining and analyzing the stages and costs of transportation between producing areas and wholesalers on the circulation routes of fruits.

• Journal of the Korean Mathematical Society
• /
• v.53 no.1
• /
• pp.115-126
• /
• 2016

Let $E{\subset}{\mathbb{F}}^d_q$, the d-dimensional vector space over the finite field with q elements. Construct a graph, called the distance graph of E, by letting the vertices be the elements of E and connect a pair of vertices corresponding to vectors x, y 2 E by an edge if ${\parallel}x-y{\parallel}:=(x_1-y_1)^2+{\cdots}+(x_d-y_d)^2=1$. We shall prove that the non-overlapping chains of length k, with k in an appropriate range, are uniformly distributed in the sense that the number of these chains equals the statistically correct number, $1{\cdot}{\mid}E{\mid}^{k+1}q^{-k}$ plus a much smaller remainder.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.77-80
• /
• 2000

In this paper, we propose a method of detecting the distance between two vehicles by computing the disparity of the close-rang vehicle stereo image using two digital cameras. The boundary(or edge) of the object considered the vehicle is obtained by using the modified wavelet transform which has multi-resolution characteristics. We analyze the histogram using the coarse-to-fine method considering a whole feature and increase the resolution to obtain the exact disparity. From the results, the distance of the close-range vehicle is detected effectively by using our proposed method.

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.25-32
• /
• 2016

In this paper, we propose a method that is tracking an object in real time using particle filter and the observation model with edge. First of all, the proposed method defines the object to be tracked in the initial frame. Then, it generates the edge observation model for the object to be tracked and a set of particles. It calculates the weight by comparing the average of the middle distance in eight-way of particle filter edge model with that in edge observation model, and then updates the weight with the calculated value. After resampling particles using the updated weights, it estimates the current location of the tracked object. Finally, this paper demonstrates the performance of the stable tracking through comparison with the existing method by using a number of experimental data.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.588-594
• /
• 2000

Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.64-76
• /
• 2009

Experimental and numerical studies are conducted on the characteristics of flame extinction and edge flame oscillation in counterflow diffusion flames. The characteristics of flame extinction and edge flame oscillation are well described varying burner diameter, separation distance between two burners, global strain rate, and velocity ratio. It is verified numerically and experimentally that radial conduction heat loss significantly contributes to flame extinction and edge flame oscillation at low strain rate flames in zero- and micro-gravity. It is also shown that for appropriately small burner diameters flame extinction modes are grouped into four and these are significantly attributed to excessive radial conduction heat loss. The edge flame oscillation can be characterized well by one curve with Strouhal number and Peclet number.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.473-478
• /
• 2011

The extent of a rectangular conducting plane for measuring electromagnetic interference is discussed. Mutual coupling between the transmit and receive antennas is negligible, the effects of the ground plane on the normalized site attenuation(NSA) are considered by applying GTD(Geometric theory of diffraction). The calculation was done for the case that measuring distance(d) was 3 m for both horizontal and vertical polarizations. As the result, the size of the rectangular ground plane almost never affects upon NSA for horizontal polarization, but for vertical case, when both width and length of the rectangular plane are several times as long as distance, the effects of the edges are reduced under 1 dB.

• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.47-53
• /
• 2007

To assess the risk of genetically modified (GM) rice on the agricultural ecosystem, agronomic characteristics, pollen longevity and outcrossing rate between GM (Iksan 483 and Milyang 204) and non-GM (their wild types and female parents) varieties were investigated using the bar gene as a tracer marker in paddy field. The agronomic characteristics of two GM rice were similar to their female-parents (non-GM rice) except heading date and 1,000 grain weight of Iksan 483, and they did not show a difference by the introgression of the bar gene as the genetic traits of rice varieties. Pollen viability was more than 90% just after shedding, and it was rapidly decreased below 50% at 5 minutes after shedding both GM and non-GM varieties. The Pollen longevity was lost after 30 minutes of anthesis. When the distance of gene flow from GM to non-GM rice detected to 6 m from the edge of GM rice plant, the maximum distance of pollen dispersal was 4.5m and 3.9m in Iksan 483 and Milyang 204, respectively, and that was increased in order of west, south, east, and north to the dominant wind direction, west-south. Mean outcrossing rate was very low as 0.003 and 0.001% within 1.5 m from the edge of Iksan 483 and Milyang 204, and the GM hybrids by the pollen dispersal did not detected over 4.5 m from the edge of GM rice plant. The results may help to establish the strategy which reduce the risk of pollen-mediated gene flow between GM and non-GM rice.