• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.67-72
• /
• 2018

This study was conducted to investigate a potential of Yellow poplar (Liriodendron tulipifera L.) as a raw material for the manufacturing of particleboard (PB) and oriented strandboard (OSB). PB panels were prepared at the parameters of $0.7g/cm^3$ density, 15 mm thickness, three-layer, $E_1$ grade urea-formaldehyde (UF) resin, emulsion wax, and hardener. OSB panels were manufactured with a density of $0.65g/cm^3$, thickness of 10 mm, and $E_1$ grade of UF resin. Particle size of the face layer of PB was 20~80 mesh with 7~9% moisture content (MC), while that of core-layer was 3~20 mesh with 3~5% MC, which was similar to the production condition of commercial PB. As a result, the manufactured PB panels with 15.8 mm thickness, $0.7g/cm^3$ density, and 5.8% MC satisfied the requirement of bending strength of 15 type PB of Korean Industrial Standard (KS F 3104). Both internal bonding (IB) strength and surface screw withdrawal resistance also satisfied the requirement of 18 type PB of the standard. But, the edge screw withdrawal resistance satisfied the requirement of 15 type PB of the standard. These differences in properties could be due to the slenderness ratio of raw particles. In case of OSB panels with 10.7 mm thickness, $0.68g/cm^3$ density, and 5.8% MC satisfied all the requirements of bending strength, screw withdrawal resistance, and IB strength of 18 type PB of the standard. These results suggest that Yellow poplar wood has a good potential as a raw material for the production of PB and OSB.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.115-124
• /
• 2022

This study was conducted to obtain basic data that could help prevent damage caused by slow-moving landslides (land-creep). Specifically, the geological, topographic, and physical characteristics of land-creep were analyzed in Jiphyeon-myeon, Jinju-si. The first and second analyzed land-creeps occurred in 1982 and 2019, respectively. The area damaged in the second land-creep was about 11.5-fold larger than that damaged in the first land-creep. The dominant constituent rock in the land-creep area was sedimentary rock, which seems to be weakly resistant to weathering. The areas that collapsed due to land-creep were related to the presence of separated rocks between the bedding plane in the estimated activity surface over the slope direction and the vertically developed joint surface. Thus, surface water and soil debris were introduced through the gaps of separated rocks. Additionally, the areas collapsed due to the combination of the bedding plane and joint surface shale and sandstone showed an onion structure of weathered outcrop from the edge to inner part caused by weathering from ground water. Consequently, core stones were formed. The study area was a typical area of land-creep in a mountain caused by ground water. Land-creep was classified into convex areas of colluvial land-creep. The landslide-risk rating in the study area was classified into three and five classes. The flow of ground water moved to the northeast and coincided with the direction of the collapse. Soil bulk density in the collapsed area was lower than that in ridge area, which was rarely affected by land-creep. Thus, soil bulk density was affected by the soil disturbance in the collapsed area.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.113-117
• /
• 2016

Recently, hydrogen is regarded as important energy in the future, because it is clean and renewable. The photoelectrochemical (PEC) system, which produce hydrogen using water splitting by solar energy, is one of the most promising energy systems because it has abundant energy sources and good theoretical efficiency. GaN has recently been regarded as suitable photoelectrode that could be used to split water to generate hydrogen without extra bias because its band edge position include water redox potential ($V_{redox}=1.23$ vs. SHE). GaN also shows considerable corrosion resistance in aqueous solutions and it is possible to control its properties, such as structure, band gap, and catalyst characteristics, in order to improve solar energy conversion efficiency. But, even if the band edge position of GaN make PEC reaction facilitate without bias, the overpotential of oxygen evolution reaction could reduce the efficiency of system. One of the ways to decrease overpotential is introduction of co-catalyst on photoelectrode. In this paper, we will investigate the effect of manganese dioxide ($MnO_2$) as a co-catalyst. $MnO_2$ particles were dispersed on GaN photoelectrode by spincoater and analyzed properties of the PEC system using potentiostat (PARSTAT4000). After coating $MnO_2$, the flat-band potential ($V_{fb}$) and the onset voltage ($V_{onset}$) were moved negatively by 0.195 V and 0.116 V, respectively. The photocurrent density increased on $MnO_2$ coated sample and time dependence was also improved. These results showed $MnO_2$ has an effect as a co-catalyst and it would enhance the efficiency of overall PEC system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.312-321
• /
• 2003

In this paper, we implement robot which are ability to recognize obstacles and moving automatically to destination. we present two results in this paper; hardware implementation of image processing board and software implementation of visual feedback algorithm for a self-controlled robot. In the first part, the mobile robot depends on commands from a control board which is doing image processing part. We have studied the self controlled mobile robot system equipped with a CCD camera for a long time. This robot system consists of a image processing board implemented with DSPs, a stepping motor, a CCD camera. We will propose an algorithm in which commands are delivered for the robot to move in the planned path. The distance that the robot is supposed to move is calculated on the basis of the absolute coordinate and the coordinate of the target spot. And the image signal acquired by the CCD camera mounted on the robot is captured at every sampling time in order for the robot to automatically avoid the obstacle and finally to reach the destination. The image processing board consists of DSP (TMS320VC33), ADV611, SAA7111, ADV7l76A, CPLD(EPM7256ATC144), and SRAM memories. In the second part, the visual feedback control has two types of vision algorithms: obstacle avoidance and path planning. The first algorithm is cell, part of the image divided by blob analysis. We will do image preprocessing to improve the input image. This image preprocessing consists of filtering, edge detection, NOR converting, and threshold-ing. This major image processing includes labeling, segmentation, and pixel density calculation. In the second algorithm, after an image frame went through preprocessing (edge detection, converting, thresholding), the histogram is measured vertically (the y-axis direction). Then, the binary histogram of the image shows waveforms with only black and white variations. Here we use the fact that since obstacles appear as sectional diagrams as if they were walls, there is no variation in the histogram. The intensities of the line histogram are measured as vertically at intervals of 20 pixels. So, we can find uniform and nonuniform regions of the waveforms and define the period of uniform waveforms as an obstacle region. We can see that the algorithm is very useful for the robot to move avoiding obstacles.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.112-119
• /
• 2012

This study investigated the diel and tidal distributions of the two mysids, Archaeomysis kokuboi and Acanthomysis nakazatoi, in relation to their growth stages in the sandy surf zone of Yongil Bay, located on the southeastern part of Korean Peninsula. Sampling was conducted with a sledge net at every two hours for almost 24 hours at three sites: water edge, water surface and sand bottom both in 1-m deep water areas. The abundance of Archaeomysis kokuboi juveniles was too low to count both in day and night samples. While there was no difference in immature A. kokuboi abundance between day and night in the bottom or water edge, that at the water surface was significantly higher at night than daytime. The abundance of A. kokuboi adults, especially of males, in the bottom was significantly higher in daytime than night and no individuals appeared to the water surface either day or night. In comparison, the abundance of Acanthomysis nakazatoi juveniles between day and night did not differ significantly at all the three sites, with the highest number being distributed in the bottom. The abundance of immatures between day and night also did not differ significantly and no individuals appeared to the water surface either day or night. The abundance of A. nakazatoi adults, especially females, in the bottom was significantly higher at night than daytime and there was no significant difference in abundance between day and night in the other sites. There was also no significant difference in abundances of the two species between ebb and flood tides, except for A. kokuboi immatures which appeared significantly more during the ebb tides at the water surface. Overall, the distribution of the two sympatric species, A. kokuboi and A. nakazatoi, was not the same in the sandy surf zone. Its difference seems to depend on their stages of growth, and the change in their abundance may be influenced more by diurnal rhythms than tidal effects. The population density of A. nakazatoi in the sandy surf zone was much higher than that of A. kokuboi, and relatively higher densities in all growth stages of the former were found in the sandy bottom ranging from juveniles to adults. These results indicate that A. nakazatoi has exceedingly better ability of sand burrowing even from the juvenile stage, and thus is an ecologically better adapted species in the sandy surf zone than another sympatric species, A. kokuboi.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2011

The objective of this study was to investigate the landscape structures of the National and Provincial Forest Parks in the list of "100 Famous Forests of Korea" designated by Korea Forest Service by comparing them with those of the non-designated forests. Among the designated and the non-designated, 34 mountain forests were chosen respectively over all provinces of Korea. The spatial characteristics of forest landscapes were quantified as the landscape indices independently using FRAGSTATS and the two sets of results of analyses were compared each other. According to the results of the comparative study, the designated forests were found on the higher elevation with the higher average slope and the more complicated relief conditions rather than those of the non-designated. In terms of landscape structure, the designated forests show the larger average patch size, the lower edge density and the higher diversity of landscape components. These results indicate that the more hilly mountain forests with the more complicated spatial distribution patterns of patches are the characteristics of the designated forests. The indices of the forest landscape structure would be useful in understanding the perception of forest landscape.

• Journal of dental hygiene science
• /
• v.8 no.2
• /
• pp.89-96
• /
• 2008

Effects of sodium fluoride exposure on the amelogenesis during fetal formation were investigated using 11 days rat incisor of control group and two experimental groups. According to results of morphological analysis using an electron microscope, enamel organ in the rat incisor consisted of presecretory, secretory, and maturation zone, especially maturation zone had ruffle-ended ameloblasts (rAB) that additionally supply inorganic ions and smooth-ended ameloblasts (sAB) that remove water and organic compounds. Such a histological composition was same in fetal and adult rats. According to experimental results using calcein (green fluorescence) in order to reveal the modulation cycle of ameloblast, modulation cycle of experimental group decreased on an average one time than control group, as increase of density of sodium fluoride indicated that thickness of smooth-ended ameloblast decreased. Also ratio of thickness on sagittal total length of sAB increased than rAB in experimental groups than control group. In total length of teeth, an injected 100 ppm sodium fluoride group was similar control group but as injected 200 ppm group became short. In experimental group, thickness of sAB and rAB became narrow to the tip of cutting edge. According to concentration of sodium fluoride grows, the modulation cycle and total length of teeth were decreased, finally it prevented teeth growth.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.76-82
• /
• 2016

In this paper, we evaluated shielding effectiveness (SE) of carbon nanotube (CNT) film using near field scanning (NFS) in near field analysis. We adopted CNT film with deposit carbon density of 5% and thickness of 1mm for evaluation of shielding characteristic. Using a test coupon analogized to an actual IC package, we measured SE according to measuring position and SE according to distances between the CNT film and the test coupon. As a result, the measured SE in the near field varied with frequency. Especially, the measured electric field SE in the center of the test coupon is better than that of the measured edge point of the test coupon where it is affected by fringing effect. The results show that the measured SE in the near field is affected not only by frequency but also by measurement environment such as position and height of the probe and height of shielding film. In conclusion, we should choose proper methods for SE measurement considering interference distance in the electronic control system because there is little correlation between the proposed evaluation method in the near field and ASTM D 4935-10.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.413-422
• /
• 2003

We have calculated the power extraction efficiency and the lasing wavelength distribution of index-coupled DFB lasers at threshold for various kL and facet reflectivity combinations, and compared with those above-threshold. The power extraction efficiency increases as the asymmetry of the facet reflectivities increases. The power extraction efficiency above-threshold is slightly larger than that at threshold. Since the relative photon density around the center region increases as kL increases, the power extraction efficiency decreases. The uniformity of the distribution of lasing wavelength over the stop band increases due to the relief of mode degeneracy as the asymmetry of the facet reflectivities increases. In the case of AR-HR combination, the lasing wavelength distributions at threshold are similar to those above-threshold. However, in the case of AR-AR combination, the lasing wavelength at threshold is concentrated on both edges of the stop band, while it is concentrated only on the longer wavelength edge above-threshold. As kL increases, the range of the lasing wavelength distribution increases due to the increase of the stop band. The effect of AR reflectivity on the power extraction and the lasing wavelength distribution is very weak.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.114-118
• /
• 2011

We report on the growth and characterization of nano and micro scale GaN structures selectively grown on the vertex of hexagonal GaN pyramids. $SiO_2$ near the vertex of hexagonal GaN pyramids was removed by optimized photolithgraphy process and followed by a selective growth of nano and micro scale GaN structures by metal organic vapor phase epitaxy (MOVPE). The pyramidal GaN nano and micro structures which have crystal facets of semi-polar {1-101} facets were formed only on the vertex of GaN pyramids and the size of the selectively grown nano and micro GaN structures was easily controlled by growth time. As a result of TEM measurement, Reduction of threading dislocation density was conformed by transmission electron microscopy (TEM) in the selectively grown nano and micro GaN structures. However, stacking faults were newly developed near the edge of $SiO_2$ film because of the roughness and nonuniformity in thickness of the $SiO_2$ film.