• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.223-229
• /
• 2005

In this paper, we proposed an extended edge-based line averaging method for deinterlacing with restricted search range. Conversion from interlaced signal to non-interlaced signal is one of important issues. Conventional deinterlacing algorithms usually utilize edge-based line average algorithm(ELA) within pixel-by-pixel approach. However, it is very sensitive to noise and variation of intensity. To reduce the sensitivity, the proposed method adopts a block-by-block approach and provides reliable direction of edge. Simulation results show that it provides a better performance than other pixel-by-pixel ELA-based methods.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2271-2280
• /
• 1999

In this paper, a variable motion estimation scheme based on HBMA(Hierarchical Block Matching Algorithm) to improve the performance and to reduce heavy computational and transmission load, is presented. The proposed algorithm is composed of four steps. First, block activity for each block is defined using the edge information of differential image between two sequential images, and then average block activity of the present image is found by taking the mean of block activity. Secondly, camera pan compensation is carried out, according to the average activity of the image, in the hierarchical pyramid structure constructed by wavelet transform. Next, the LUT classifying each block into one among Moving, No Moving, Semi-Moving Block according to the block activity compensated camera pan is obtained. Finally, as varying the block size and adaptively selecting the initial search layer and the search range referring to LUT, the proposed variable HBMA can effectively carries out fast motion estimation in the hierarchical pyramid structure. The cost function needed above-mentioned each step is only the block activity defined by the edge information of the differential image in the sequential images.

• The Journal of Korean Society for Radiation Therapy
• /
• v.10 no.1
• /
• pp.88-93
• /
• 1998

Multileaf collimator is essential equipment in conformal radiation therapy, however the use is limitted by increase of penumbra width and undulating dose distribution at the field edge. The purpose of this study is to improve the penumbra and dose distribution in the multileaf collimator field edge. Measurement were performed with X-omat V film in solid water phantom using 6MV photon beam from Siemens linear accelerator. All the measurement were made along the central axis of $5{\times}5cm,\;10{\times}10cm$ circular field for constant SSD of 100 cm. To improve the penumbra and dose distribution collimator was rotated by 15 degrees from 0 to 90 degrees (collimator rotation method) and center was shifted to the longitudinal direction by fourth of lead width (center shift method). We compare the penumbra and dose distribution at the field edge to alloy block. Dose distribution and penumbra width at the feild edge of MLC showed undulated dose pattern and increased penumbra compared with alloy block. However, in the collimator rotation method and center shift method we abtained simular results with alloy block. Through the study we expected that clinical use of MLC will be increase.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.63-71
• /
• 2009

In this study, we propose a revised dynamic ROI (Region-of-Interest) coding method in which the focused ROI is automatically extracted without help from users during the recovery process of low DOF (Depth-of-Field) JPEG2000 image. The proposed method creates edge mask information using high frequency sub-band data on a specific level in DWT (Discrete Wavelet Transform), and then identifies the edge code block for a high-speed ROI extraction. The algorithm scans the edge mask data in four directions by the unit of code block and identifies the edge code block simply and fastly using a edge threshold. As the results of experimentation applying for Implicit method, the proposed method showed the superiority in the side of speed and quality comparing to the existing methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.6
• /
• pp.448-455
• /
• 2003

A system design technique of automatic thickness measurement and defect inspection system, which measures the thickness of the ALC(Autoclaved Lightweight Concrete) block and inspects the defect on a realtime basis is proposed. The image processing system was established with a CCD camera, an image grabber, and a personal computer without using assembled measurement equipment. The image obtained by this system was analyzed by a devised algorithm, specially designed for the enhanced measurement accuracy. For the realization of the proposed algorithm, the preprocessing method that can be applied to overcome uneven lighting environment, an enhanced edge decision method using 8 edge-pairs with irregular and rough surface, the unit length decision method in uneven condition with rocking objects, and the curvature calibration method of camera using a constructed grid are developed. The experimental results, show that the required measurement accuracy specification is sufficiently satisfied using our proposed method.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.93-101
• /
• 1995

Fractal coding is a promising method for image compression, but it has not lived up to its promise as low bit-rate image compression scheme. The existing algorithms for finding self-mapping contractive transforms are computationally expensive and offer a poor rate-quality tradeoff. In this paper, we propose a segment based fractal coding. We classify the range blocks into shade, midrange or edge blocks, and segment edge block along the edge. And we apply midrange coding scheme for each segment. Our experiments show that our method gives better rate-qualty trade of than current fractal block coding methods.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.33-42
• /
• 1997

In this paper, a video coding method in wavelet transformed multi-resolution image using variable block sized motion estimation and multi-codebook is proposed. In the propoed method, the accuracy of motion estimation is increased by using variable block matching algorithm based on edge type of blocks which estimation is increased by using variable block matching algoritm based on edge type of blocks which is classified accoridng to the magnitude of wavelet coefficients in vertical subband and horizontal subband of the highest layer. Also, we increased the flexibility of bit allocation and decreased vector quantization error for motion compensated error transmission by using importance of each subband. Some experimental results confirm that he proposed mothod has fine reconstructed images without blocking effect at low bit rate, and especially reconstructs edges well to which human eyes are sensitive.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2254-2263
• /
• 2000

This paper proposes an efficient predictive image-compression technique based on vector quantization of blocks of pels. In the proposed method edge contents of blocks control the selection of predictors and block shapes as well. The maximum number of bits assigned to quantizers has been in creased to 3bits/pel from 1/5bits/pel, the setting employed by forerunners in predictive vector quantization of images. This increase prevents the saturation in SNR observed in their results in high bit rates. The variable block shape is instrumental in eh reconstruction of edges. The adaptive procedure is controlled by means of he standard deviation ofp rediction errors generated by a default predictor; the standard deviation address a decision table which can be set up beforehand. eh proposed method is characterized by overall improvements in image quality over A-VQ-PE and A-DCT VQ, both of which are known for their efficient use of vector quantizers.

• Journal of Korea Multimedia Society
• /
• v.20 no.10
• /
• pp.1655-1661
• /
• 2017

A high-speed directional interpolation algorithm based on the pattern of a $2{\times}2$ pixel block is proposed in this paper. The basic concept of the proposed algorithm is started from UDWT(un-decimated discrete wavelet transform), but there are no transform operations. In order to detect the direction of the edge, 4-pixel differences of two pairs in the $2{\times}2$ block are compared. The $2{\times}2$ block patterns are grouped into total 8 classes, and thereafter the directional interpolation is executed according to the type of the pattern. Since the calculation of the proposed algorithm is very simple and needs a few additions on integer data type, the computation time is almost same as that of bilinear interpolation algorithm. However, experimental results show that the output quality of the proposed one is better than those of the conventional interpolation ones in the objective quality and the computation time.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.11-17
• /
• 1999

A three dimensional finite element generation code has been developed attaching simple blocks. Block can be either a quadrature or a cube depending on the dimension of a subject considered. Finite element serendipity basis functions are employed to map elements between the computational domain and the physical domain. Elements can be generated with wser defined progressive ratio for each block. For blocks to be connected properly, a block should have a consistent numbering scheme for vertices, side nodes, edges and surfaces. In addition the edge information such as the number of elements and the progressive ratio for each direction should also be checked for interfaces to have unique node numbers. Having done so, user can add blocks with little worry about the orientation of blocks, Since the present the present code has been written by a Visual Basic language, it can be developed easily for a user interactive manner under a Windows environment.