• Journal of Korea Multimedia Society
• /
• 제12권2호
• /
• pp.191-199
• /
• 2009

In this paper, the improved edge extract methods is proposed in order to extract edge. For the correct and fast detect, the binary image using the threshold value is applied for a experiment. For the experimental analysis, we compare the existing edge methods with the improved methods. Hereby, the exist methods are the sobel, robert, and prewitt. and the improved methods use the existing methods which is applied mask variations. The merits of the improved mothods have a result of a little erosion, a apparent edge. Specially, we use the grey image of medical image for the experimental analysis and then apply threshold value for a result image. After that, we acquire a apparent edge. For a quantitative analysis of the each methods, the each images was applied a histogram. As a result, we prove the merit of the improved methods using a analytical graph of the medical images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제24권8호
• /
• pp.985-992
• /
• 2020

Edge computing is a technology that can prepare for a new era of cloud computing. Edge computing is not a remote data center where data is processed and computed, but low-latency/high-speed computing is realized by adding computing power and data processing power to the edge side close to an access point such as a terminal device or a gateway. It is possible. The types of edge computing include mobile edge computing, fog computing, and cloudlet computing. In this article, we describes existing open source platforms for implementing edge computing nodes. By presenting and comparing the structure, features of open source edge platforms, it is possible to acquire knowledge required to select the best edge platform for industrial engineers who want to build an edge node using an actual open source edge computing platform.

• Journal of the Korea Society of Computer and Information
• /
• 제21권5호
• /
• pp.31-40
• /
• 2016

In this paper, we analyse the characteristics of the edge image and propose a new entropy coding optimized to the compression of the edge image. The pixel values of the edge image have the Gaussian distribution around '0', and most of the pixel values are '0'. By using this analysis, the Zero Block technique is utilized in spatial domain. And the Intra Prediction Mode of the edge image is similar to the mode of the surrounding blocks or likely to be the Planar Mode or the Horizontal Mode. In this paper, we make use of the MPM technique that produces the Intra Prediction Mode with high probability modes. By utilizing the above properties, we design a new entropy coding method that is suitable for edge image and perform the compression. In case the existing compression techniques are applied to edge image, compression ratio is low and the algorithm is complicated as more than necessity and the running time is very long, because those techniques are based on the natural images. However, the compression ratio and the running time of the proposed technique is high and very short, respectively, because the proposed algorithm is optimized to the compression of the edge image. Experimental results indicate that the proposed algorithm provides better visual and PSNR performance up to 11 times than the JPEG.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.49-52
• /
• 2008

The numerical analysis for gas temperature of turbine blade surface has been performed to investigate development of temperature with various blade edge shape. Two different types of the turbine which one is "Sharp" edge and the other is "Round" edge was modeled. Computations have been carried out several turbine rotational speeds in the range from 0 to 10,000 rpm for the each types of turbine edge shape. As a result, the more rotational speed of turbine increased, the more turbine blade's temperature decreased. It is also found that the surface temperature of turbine blades for sharp type edge were lower than the round type edge.

• Journal of the Korea Society of Computer and Information
• /
• 제10권4호
• /
• pp.133-141
• /
• 2005

An edge is where the intensity of an image moves from a low value to high value or vice versa. The edges tell where objects are. their shape and size. and something about their texture. Many traditional edge operators are derivative based and perform reasonably well for simple noise-free images. In recent, statistical edge detectors for complex images with noises have been described. This paper compares and analysis the performance of statistical edge detectors based on the T test and Wilcoxon test, and mathematical edge detectors based on Sobel operator, and the well-known Canny detector and Wavelet transformation detector, and provides the implementation of these edge detectors using Java on the web.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 한국컴퓨터정보학회 2019년도 제59차 동계학술대회논문집 27권1호
• /
• pp.5-6
• /
• 2019

Edge Computing에서 발생하는 데이터 분석에 대한 알고리즘의 성능 평가나 검증은 필수적이다. 이러한 평가 및 검증을 위해서는 비교 가능한 데이터가 필요하다. 본 논문에서는 Edge Computing에서 발생하는 데이터에 대한 분석 결과 및 Computing Resource에 대한 성능평가를 위해 Cloud 기반의 빅 데이터 분석시스템을 구축한다. Edge Computing 비교분석 빅 데이터 시스템은 실제 IoT 노드에서 Edge Computing을 수행할 때와 유사한 환경을 Cloud 상에 구축하고 연구되는 Edge Computing 알고리즘을 Data Analysis Cluster Container에 탑재해 분석을 시행한다. 그리고 분석 결과와 Computing Resource 사용률 데이터를 기존 IoT 노드 Edge Computing 데이터와 비교하여 개선점을 도출하는 것이 본 논문의 목표이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.115-121
• /
• 2007

The aeroelastic analysis of rotor blades with trailing edge flaps, focused on reducing vibration while minimizing control effort, are investigated using large deflection-type beam theory in forward flight. The rotor blade aerodynamic forces are calculated using two-dimensional quasi-steady strip theory. For the analysis of forward flight, the nonlinear periodic blade steady response is obtained by integrating the full finite element equation in time through a coupled trim procedure with a vehicle trim. The objective function, which includes vibratory hub loads and active flap control inputs, is minimized by an optimal control process. Numerical simulations are performed for the steady-state forward flight of various advance ratios. Also, numerical results of the steady blade and flap deflections, and the vibratory hub loads are presented for various advance ratios and are compared with the previously published analysis results obtained from modal analysis based on a moderate deflection-type beam theory.

• Coupled systems mechanics
• /
• 제1권1호
• /
• pp.59-78
• /
• 2012

The available analytical methods of analysis for laterally loaded piles in level ground cannot be directly applied to such piles in sloping ground. With the commercially available software, the simulation of the appropriate field condition is a challenging task, and the results are subjective. Therefore, it becomes essential to understand the process of development of a user-framed numerical formulation, which may be used easily as per the specific site conditions without depending on other indirect methods of analysis as well as on the software. In the present study, a detailed three-dimensional finite element formulation is presented for the analysis of laterally loaded piles in sloping ground developing the 18 node triangular prism elements. An application of the numerical formulation has been illustrated for the pile located at the crest of the slope and for the pile located at some edge distance from the crest. The specific examples show that at any given depth, the displacement and bending moment increase with an increase in slope of the ground, whereas they decrease with increasing edge distance.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.70-73
• /
• 2000

The error diffusion is good for reproducing continuous image to binary image. However the reproduction of edge characteristics is weak in power spectrum analysis of display error. It is suggested for us an edge-enhanced error-diffusion method that is included pre-processing algorithm for edge characteristic enhancement. Pre-processing algorithm is organized horizontal and vertical directional 2nd order differential values and weighting function of pre-filter. The improved Error diffusion using pre-filter, presents a good results visually which edge characteristics is enhanced. The performance of the proposed algorithm is compared with that of the conventional edge-enhanced error diffusion by measuring the RAPSD of display error, the egde correlation and the local average accordance.

• IE interfaces
• /
• 제15권4호
• /
• pp.432-438
• /
• 2002

When the trailing edge and leading edge of an airfoil contour of high pressure compressor blades are measured, there exists a measurement error due to the size of the probe stylus ball diameter. In the paper an experimental study is provided to determine the optimum diameter of the probe stylus in inspecting the airfoil of the high pressure compressor blade. The measurement and analysis procedure suggested in this paper will be helpful to those who are involved in measuring and inspecting various types of blades.