• 한국항해항만학회지
• /
• 제32권3호
• /
• pp.167-172
• /
• 2008

본 연구는 컨테이너 선박의 교체시기를 경제적 관점에서 결정하기 위한 것이다. 특히 컨테이너선에서의 경제수명의 산출을 위한 비용자료에는 수많은 애매성이 존재하였다. 이러한 비용자료에 대한 애매성을 표현하기 위해 퍼지수를 이용하였다. 또한 퍼지수를 이용한 퍼지비용모델을 개발하였고, 기존의 비용모델 보다 더욱 현실적으로 분석하였다. 그리고 다양한 종류의 컨테이너선을 대상으로 제안된 퍼지모델을 이용하여 경제적 수명을 결정하였다.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.356-366
• /
• 2007

In this paper a methodology is developed to prioritize replacement of water distribution pipes according to the economical efficiency of replacement and assess the long-term effects of water main replacement policies on water distribution systems. The methodology is implemented with MATLAB to develop a computer algorithm which is used to apply the methodology to a case study water distribution system. A pipe break prediction model is used to estimate future costs of pipe repair and replacement, and the economically optimal replacement time of a pipe is estimated by obtaining the time at which the present worth of the total costs of repair and replacement is minimum. The equation for estimating the present worth of the total cost is modified to reflect the fact that a pipe can be replaced in between of failure events. The results of the analyses show that about 9.5% of the pipes in the case study system is required to be replaced within the planning horizon. Analyses of the yearly pipe replacement requirements for the case study system are provided along with the compositions of the replacement. The effects of water main replacement policies, for which yearly replacement length scenario and yearly replacement budget scenario are used, during a planning horizon are simulated in terms of the predicted number of pipe failures and the saved repair costs.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.279-285
• /
• 2009

In this study, applied to the industrial water service, it is verified feasibility of break-even analysis method which has not been introduced in Korea. The On-san water pipeline of 7.1km among the Ul-san industrial water service is selected and the optimal replacement time calculated by break-even analysis method is year 2033 to 2044 which will be 53 to 67 years since the pipes were buried. If indirect cost such as the value of lost water and traffic disruption, service interruption, etc. is calculated as 30 and 100% of the direct cost, the financially optimum replacement time is advanced 3 to 9 years. These ways present rational criteria to establish long-term plan for budget and to execute the limited budget efficiently.

• 한국수자원학회논문집
• /
• 제42권6호
• /
• pp.457-464
• /
• 2009

본 논문에서는 상수관로의 파손자료를 이용하여 관로의 위험률을 산정하기 위해 사용되는 비례위험모형의 관로의 순차적 파손시간 예측정확도를 분석하고 이를 이용하여 관로의 경제적 교체 시간구간을 산정할 수 있는 방법론을 제시하였다. 비례위험모형에 기초한 생존함수를 이용하여 연구대상 관로들의 순차적 파손시간을 예측하고 이들을 기록된 파손시간과의 차이를 분석하였다. 이를 통하여 비례위험모형의 파손시간 예측 오차를 최소화하는 생존확률은 0.70인 것으로 결정되었으며, 세 번째 파손으로부터 일곱 번째 파손에 대한 모형만이 관로의 파손시간을 예측하는데 적합한 것으로 분석되었다. 생존확률 0.70과 순차적 파손사건에 대한 생존함수의 하한 및 상한을 이용하여 예제로 사용된 관로에 대해 예측된 파손시간의 95% 신뢰구간의 하한 및 상한을 추정하였다. 예측된 파손시간의 95% 신뢰 구간의 하한과 상한을 이용하여 관로 파손 경향모형인 General Pipe Break Prediction Models(GPBM)을 구축하고 이들을 관로의 한계파괴율과 결합하여 시간에 대한 해를 구하므로써 경제적 교체 시간구간을 산정하였다.

• 품질경영학회지
• /
• 제20권2호
• /
• pp.33-43
• /
• 1992

Items are assumed to fail by degradation. An appropriate stochastic model of such item is a cumulative process in which an item can fail only when the total amount of wear exceeds a prespecified failure level. This paper presents replacement policy in which an item is replaced at a certain level of wear before failure or at failure, whichever occurs first. Yet, when measuring the item wear level is very expensive, destructive or time-consuming, it may be economical to use substitutive characteristics that are correlated with the item wear level and relatively inexpensive to measure. The item's wear level could usually be estimated by monitoring such substitutive characteristics only except for a breakdown, which may be observed immediately at its occurrence. The purpose of this paper is to find an optimal periodic replacement policy based on such substitutive characteristics that balance the cost of replacement with the cost of failure and result in a minimum total long-run average cost per unit time. The optimal level of substitutive characteristics to replace the item is obtained. Numerical example illustrate how the model can be used to determine the optimal replacement policy.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권3호
• /
• pp.373-379
• /
• 2005

In many cases, it is more practical and economical to repair a system than to replace the whole system or to perform a complete overhaul when the system fails. Two basic replacement policies were proposed by Barlow and Hunter(1960) and Morimura (1970), in which the minimal repair times are identically distributed. But, as Lam(1988) pointed out, in many cases of deteriorating system, in view of ageing and cumulative wear, the repair time will tend to be longer and longer. In this note, the two basic replacement policies are considered for a repairable system with linearly increasing repair times. Optimal policies, which maximize the steady state availability of the system, are obtained for the Weibull failure rate case.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.209-210
• /
• 2009

건축공사에서 측면 거푸집의 탈형시기와 관련하여 압축강도를 조기에 발현하는 것은 공기단축 및 경제성 측면에서 매우 중요하다. 이에, 본 연구에서는 콘크리트의 초기 강도발현에 미치는 광물질 흔 화재료의 종류 및 혼입률의 영향을 검토하였다.

• 품질경영학회지
• /
• 제28권3호
• /
• pp.53-58
• /
• 2000

In many cases, it is more practical and economical to repair a system than to replace the whole system or to perform a complete overhaul when it fails. The age replacement policy with minimal repair at failure is considered. The system is replaced every time its age reaches at $T_0$. For each intervening failure only minimal repair is done. The minimal repair times in a renewal period are increasing in the sense that the minimal repair times constitute a strictly increasing geometric process. The long-run expected cost rate Is obtained and the properties of the existence and the uniqueness of the optimal policy minimizing the long-run expected cost rate are derived.

• International Journal of Concrete Structures and Materials
• /
• 제9권2호
• /
• pp.241-254
• /
• 2015

A lot of reinforced concrete (RC) structures in Syria went out of service after a few years of construction. This was mainly due to reinforcement corrosion or chemical attack on concrete. The use of blended cements is growing rapidly in the construction industry due to economical, ecological and technical benefits. Syria is relatively rich in scoria. In the study, mortar/concrete specimens were produced with seven types of cement: one plain Portland cement (control) and six blended cements with replacement levels ranging from 10 to 35 %. Rapid chloride penetration test was carried in accordance with ASTM C 1202 after two curing times of 28 and 90 days. The effect on the resistance of concrete against damage caused by corrosion of the embedded steel has been investigated using an accelerated corrosion test by impressing a constant anodic potential. The variation of current with time and time to failure of RC specimens were determined at 28 and 90 days curing. In addition, effects of aggressive acidic environments on mortars were investigated through 100 days of exposure to 5 % $H_2SO_4$, 10 % HCl, 5 % $HNO_3$ and 10 % $CH_3COOH$ solutions. Evaluation of sulfate resistance of mortars was also performed by immersing in 5 % $Na_2SO_4$ solution for 52 weeks. Test results reveal that the resistance to chloride penetration of concrete improves substantially with the increase of replacement level, and the concretes containing scoria based-blended cements, especially CEM II/B-P, exhibited corrosion initiation periods several times longer than the control mix. Further, an increase in scoria addition improves the acid resistance of mortar, especially in the early days of exposure, whereas after a long period of continuous exposure all specimens show the same behavior against the acid attack. According to results of sulfate resistance, CEM II/B-P can be used instead of SRPC in sulfate-bearing environments.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.249-254
• /
• 2004

The radiation dosage of nuclear fuel handling machine of PHWR type NPP during normal operation is measured using semiconductor detectors. In order to predict and mitigate the damage of main components in fuel handling machine, caused by high irradiation, the radiation dosage exerted to the components by neutron and gamma ray is measured independently during one time of the fuel exchange, which is used far estimating the radiation dosage for one year. This result can guarantee the safety and economical efficiency for determining the replacement time of the high cost main components in fuel handling machine.